General poorpose steel motors

ABB LV Motors / Cat.. BU / General purpose motors / Steel GB 09-2003 933 Balancing Bearings and lubrication 039 Cold resistant grease.. Branch standard designs 071 Cooling tower duty.. P

ABB LV Motors / Cat BU / General purpose motors / Steel GB 09-2003 93

3

Balancing

Bearings and lubrication

039 Cold resistant grease

Branch standard designs

071 Cooling tower duty

142 ”Manilla”-winding connection, (440 V∆ series, 220 V∆ parallel, 60 Hz) P P P P

Cooling system

Coupling

035 Assembly of customer supplied coupling-half

Dimension drawing

Drain holes

Earthing bolt

Heating elements

General purpose steel motors - Variant codes

1) Certain variant codes cannot be used simultaneously S = Included as standard P = New manufacture only

M = On modification of a stocked motor, R = On request

or on new manufacture, NA = Not applicable

the number per order may be limited

94 ABB LV Motors / Cat BU/General purpose motors / Steel GB 09-2003

3

Insulation system

Mounting arrangements

009 IM 2001 foot/flange mounted, IEC flange, from IM 1001 (B35 from B3) M M M M

Painting

Protection

Rating & instruction plates

Applies to variants with temperature rise to class B as standard

095 Restamping output (maintained voltage, frequency), intermittent duty M M M M

150 Instruction plates and maintenance instructions

Shaft & rotor

069 Two shaft extensions as per basic catalogue Standard shaft material P P P P

410 Stainless/acid-proof steel shaft (standard or non-standard design)

Standards and regulations

Stator winding temperature sensors

121 Bimetal detectors, break type (NCC), (3 in series), 130°C, in stator winding M M M M

122 Bimetal detectors, break type (NCC), (3 in series), 150°C, in stator winding M M M M

123 Bimetal detectors, break type (NCC), (3 in series), 170°C, in stator winding M M M M

125 Bimetal detectors, break type (NCC), (2x3 in series), 150°C, in stator winding M M M M

127 Bimetal detectors, break type (NCC), (3 in series, 130°C

1) Certain variant codes cannot be used simultaneously S = Included as standard P = New manufacture only

M = On modification of a stocked motor, R = On request

or on new manufacture, NA = Not applicable

the number per order may be limited

ABB LV Motors / Cat BU / General purpose motors / Steel GB 09-2003 95

3

441 PTC - thermistors (3 in series 130°C & 3 in series 150°C),

442 PTC - thermistors (3 in series 150°C & 3 in series 170°C),

Terminal box

Testing

147 Type test with report for motor from specific delivery

Y/D-starting

1) Certain variant codes cannot be used simultaneously S = Included as standard P = New manufacture only

M = On modification of a stocked motor, R = On request

or on new manufacture, NA = Not applicable

the number per order may be limited