61347p2s11 fm Li ce ns ed C op y H K P O LY U L ib ra ry , H K P ol yt ec hn ic U ni v, 1 0 M ar ch 2 00 3, U nc on tr ol le d C op y, ( c) B S I BRITISH STANDARD BS EN 61347 2 11 2002 IEC 61347 2 11[.]
Trang 1Licensed Copy: HKPOLYU Library, HK Polytechnic Univ, 10 March 2003, Uncontrolled Copy, (c) BSI
British Standard
A single copy of this British Standard is licensed to
HKPOLYU Library
10 March 2003
This is an uncontrolled copy Ensure use of the most current version of this document by searching British Standards Online at bsonline.techindex.co.uk
Trang 2BRITISH STANDARD BS EN
61347-2-11:2002 IEC
61347-2-11:2001
Lamp controlgear —
Part 2-11: Particular requirements for
miscellaneous electronic circuits used
with luminaires
The European Standard EN 61347-2-11:2001 has the status of a
British Standard
ICS 29.140.40
NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW
Trang 3BS EN 61347-2-11:2002
This British Standard, having
been prepared under the
direction of the
Electrotechnical Sector Policy
and Strategy Committee, was
published under the authority
of the Standards Policy and
Strategy Committee on
7 March 2002
© BSI 7 March 2002
ISBN 0 580 39047 0
National foreword
This British Standard is the official English language version of
EN 61347-2-11:2001 It is identical with IEC 61347-2-11:2001 including Corrigendum 1:2001
The UK participation in its preparation was entrusted by Technical Committee CPL/34, Lamps and related equipment, to Subcommittee CPL/34/3,
Auxilliaries, which has the responsibility to:
A list of organizations represented on this subcommittee can be obtained on request to its secretary
From 1 January 1997, all IEC publications have the number 60000 added to the old number For instance, IEC 27 has been renumbered as IEC 60027-1 For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems
Cross-references
The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the
“Find” facility of the BSI Standards Electronic Catalogue
A British Standard does not purport to include all the necessary provisions of
a contract Users of British Standards are responsible for their correct application
Compliance with a British Standard does not of itself confer immunity from legal obligations.
— aid enquirers to understand the text;
— present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;
— monitor related international and European developments and promulgate them in the UK
Summary of pages
This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover
The BSI copyright date displayed in this document indicates when the document was last issued
Amendments issued since publication
Trang 4EUROPEAN STANDARD EN 61347-2-11
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2001
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref No EN 61347-2-11:2001 E
ICS 29.140.99
English version
Lamp controlgear Part 2-11: Particular requirements for miscellaneous electronic circuits
used with luminaires
(IEC 61347-2-11:2001)
Appareillages de lampes
Partie 2-11: Prescriptions particulières
pour circuits électroniques divers
utilisés avec les luminaires
(CEI 61347-2-11:2001)
Geräte für Lampen Teil 2-11: Besondere Anforderungen an elektronische Module für Leuchten (IEC 61347-2-11:2001)
This European Standard was approved by CENELEC on 2001-07-01 CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member
This European Standard exists in three official versions (English, French, German) A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom
Trang 5EN 61347-2-11:2001 2
-The text of document 34C/528/FDIS, future edition 1 of IEC 61347-2-11, prepared by SC 34C,
Auxiliaries for lamps, of IEC TC 34, Lamps and related equipment, was submitted to the
IEC-CENELEC parallel vote and was approved by IEC-CENELEC as EN 61347-2-11 on 2001-07-01
Teh foollwisetad gn rewe fix:de
– lsetatad te by whcih tNE eh has mi eb otmelpdetne
an taoitnal level by uplbcioitafo n na ditnecila
– lsetat tadb ey whcit hn ehaitnos lataradnsd cfnocilitgn
This tsnaadrd shlla eb usde oc ninjuncitno with NE 43167-1:0210
ETON In this ts,dradna tf ehollwoiirp gnnt tyu era seps:de
- requrimestne : in romt naype;
- sett scepficiatisno: in tiacil type;
- tonse: in mslaleor rmt nay.ep
nAxense desingtade "ronmaitve" rae rapt fo teh body fo hts etnarad.d
t nIhsi stnaradd, naxen ZA si ronmaitev
nAxen ZA has been daedb dy CENELE.C
odnEnemesrt notiec
Teh xett fo nI ehtretnatoianS ltnaradI dEC 61347-2-11:0210 saw parpvob dey CEENLEsa C a
ruEopnae tSdnarahtiw dna tuoy mfidoicanoit
-The text of document 34C/528/FDIS, future edition 1 of IEC 61347-2-11, prepared by SC 34C,
xuAiilrasei for malps, fo CEI TC 34, maLsp r dnaetalqe deuimp,tne was smbudetti ot teh IE-C
NECEELp Carallel voet dna was arppovde by CEENCEL sa EN 163-74-211 on 2-100-70.10
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
– latest date by which the national standards conflicting
This standard shall be used in conjunction with EN 61347-1:2001
NOTE In this standard, the following print types are used:
- requirements : in roman type;
- test specifications: in italic type;
- notes: in smaller roman type.
Annexes designated "normative" are part of the body of the standard
In this standard, annex ZA is normative
Annex ZA has been added by CENELEC
odnEnemesrt notiec
Teh xett fo nI ehtretnatoianS ltnaradI dEC 61347-2-11:0210 saw parpvob dey CEENLEsa C a
European Standard without any modification
-The text of document 34C/528/FDIS, future edition 1 of IEC 61347-2-11, prepared by SC 34C,
xuAiilrasei for malps, fo CEI TC 34, maLsp r dnaetalqe deuimp,tne was smbudetti ot teh IE-C
NECEELp Carallel voet dna was arppovde by CEENCEL sa EN 163-74-211 on 2-100-70.10
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
– latest date by which the national standards conflicting
This standard shall be used in conjunction with EN 61347-1:2001
NOTE In this standard, the following print types are used:
- requirements : in roman type;
- test specifications: in italic type;
- notes: in smaller roman type.
Annexes designated "normative" are part of the body of the standard
In this standard, annex ZA is normative
Annex ZA has been added by CENELEC
Endorsement notice
The text of the International Standard IEC 61347-2-11:2001 was approved by CENELEC as a
European Standard without any modification
-The xett fo codmu5/C43 tneF/82Df ,SIurute detinoi fo 1 EIC 163-74-211, rprapeed yb CS C43,
xuAiilrasei for malps, fo CEI TC 34, maLsp r dnaetalqe deuimp,tne was smbudetti ot teh IE-C
NECEELp Carallel voet dna was arppovde by CEENCEL sa EN 163-74-211 on 2-100-70.10
Teh foollwisetad gn rewe fix:de
– lsetatad te by whcih tNE eh has mi eb otmelpdetne
an taoitnal level by uplbcioitafo n na ditnecila
– lsetat tadb ey whcit hn ehaitnos lataradnsd cfnocilitgn
This tsnaadrd shlla eb usde oc ninjuncitno with NE 43167-1:0210
ETON In this ts,dradna tf ehollwoiirp gnnt tyu era seps:de
- requrimestne : in romt naype;
- sett scepficiatisno: in tiacil type;
- tonse: in mslaleor rmt nay.ep
nAxense desingtade "ronmaitve" rae rapt fo teh body fo hts etnarad.d
t nIhsi stnaradd, naxen ZA si ronmaitev
nAxen ZA has been daedb dy CENELE.C
Endorsement notice
Teh xett fo nI ehtretnatoianS ltnaradI dEC 61347-2-11:0210 saw parpvob dey CEENLEsa C a
ruEopnae tSdnarahtiw dna tuoy mfidoicanoit
Page 2
EN 61347−2−11:2001
© BSI 7 March 2002
Trang 661347-2-11 © IEC:2001 – 3 –
CONTENTS
INTRODUCTION 4
1 Scope 5
2 Normative references 5
3 Definitions 5
4 General requirements 5
5 General notes on tests 6
5.1 Number of specimens 6
6 Classification 6
7 Marking 6
7.1 Mandatory marking 6
7.2 Information to be provided, if applicable 6
8 Protection against accidental contact with live parts 6
9 Terminals 6
10 Provisions for earthing 7
11 Moisture resistance and insulation 7
12 Electric strength 7
13 Thermal endurance for windings 7
14 Fault conditions 7
15 Construction 7
16 Creepage distances and clearances 7
17 Screws, current-carrying parts and connections 7
18 Resistance to heat, fire and tracking 7
19 Resistance to corrosion 7
20 Annexes 7
Annex ZA ( normative) Normative references to international publications with their corresponding European publications 8
Page 3
EN 61347−2−11:2001
© BSI 7 March 2002
Trang 761347-2-11 © IEC:2001 – 4 –
INTRODUCTION
This first edition of IEC 61347-2-11 is published in conjunction with IEC 61347-1 The
formatting into separately published parts provides for ease of future amendments and
revisions Additional requirements will be added as and when a need for them is recognized
This standard, and the parts which make up IEC 61347-2, in referring to any of the clauses of
IEC 61347-1, specify the extent to which such a clause is applicable and the order in which
the tests are to be performed; they also include additional requirements, as necessary All
parts which make up IEC 61347-2 are self-contained and, therefore, do not include references
to each other
Where the requirements of any of the clauses of IEC 61347-1 are referred to in this standard
by the phrase "The requirements of clause n of IEC 61347-1 apply", this phrase is interpreted
as meaning that all requirements of the clause in question of part 1 apply, except any which
are clearly inapplicable to the specific type of lamp controlgear covered by this particular part
of IEC 61347-2
Page 4
EN 61347−2−11:2001
© BSI 7 March 2002
Trang 861347-2-11 © IEC:2001 – 5 –
LAMP CONTROLGEAR – Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires
1 Scope
This part of IEC 61347 specifies general and safety requirements for miscellaneous electronic
circuits used with luminaires for use on a.c supplies up to 1 000 V at 50 Hz or 60 Hz and/or
d.c supplies up to 250 V This part does not apply to circuits or devices for which specific IEC
standards are published
NOTE Examples of miscellaneous electronic circuits used with luminaires are
– electronic ballast control circuits;
– switching circuits used in association with daylight and/or presence sensors;
– circuits to assist EMC performance;
– intermittence and similar devices used with lighting chains;
– earth leakage or open-circuit protective devices used with neon transformers.
For the purpose of this part of IEC 61347, the normative references given in clause 2 of
IEC 61347-1 which are mentioned in this standard apply
IEC 61347-1:2000, Lamp controlgear – Part 1: General and safety requirements
3 Definitions
For the purpose of this part of IEC 61347, the definitions of clause 3 of IEC 61347-1 apply
together with the following
3.1
miscellaneous electronic circuits used with luminaires
electronic circuits for use with a luminaire The circuit may assist the functioning of the lamp
controlgear and/or provide additional functions for the luminaire such as switching or circuit
monitoring
NOTE Electronic circuits covered by their own IEC standards are not included in this definition.
The requirements of clause 4 of IEC 61347-1 apply
Page 5
EN 61347−2−11:2001
© BSI 7 March 2002
Trang 961347-2-11 © IEC:2001 – 6 –
5 General notes on tests
Clause 5 of IEC 61347-1 is applicable with the following addition:
5.1 Number of specimens
The following number of specimens shall be submitted for testing:
– 1 unit for the tests of clauses 6 to 13 and clauses 15 to 19;
– 1 unit for the tests of clause 14, fault conditions (additional units or components, where
necessary, may be required in consultation with the manufacturer)
6 Classification
The requirements of clause 6 of IEC 61347-1 apply
7 Marking
Miscellaneous electronic circuits that form an integral part of the luminaire need not be
marked
7.1 Mandatory marking
Miscellaneous electronic circuits, other than integral, shall be clearly and durably marked with
the following mandatory markings in accordance with the requirements of 7.1 of IEC 61347-1:
Items a), b), d), e), f), k) and l) of 7.1 of IEC 61347-1 together with:
– for controllable circuits, the control terminals shall be identified;
– for miscellaneous circuits classified independent, the marking of ta rating is considered an
acceptable alternative to the marking of tc rating
The requirements of 7.2 of IEC 61347-1 shall be satisfied
7.2 Information to be provided, if applicable
In addition to the above mandatory markings, the following information, if applicable, shall be
given either on the miscellaneous electronic circuit, or be made available in the
manufacturer’s catalogue or the like
Items h), i) and j) given in 7.1 of IEC 61347-1
The requirements of 7.2 of IEC 61347-1 shall be satisfied
8 Protection against accidental contact with live parts
The requirements of clause 10 of IEC 61347-1 apply
9 Terminals
The requirements of clause 8 of IEC 61347-1 apply
Page 6
EN 61347−2−11:2001
© BSI 7 March 2002
Trang 1061347-2-11 © IEC:2001 – 7 –
10 Provisions for earthing
The requirements of clause 9 of IEC 61347-1 apply
11 Moisture resistance and insulation
The requirements of clause 11 of IEC 61347-1 apply
12 Electric strength
The requirements of clause 12 of IEC 61347-1 apply
13 Thermal endurance for windings
The requirements of clause 13 of IEC 61347-1 do not apply
14 Fault conditions
The requirements of clause 14 of IEC 61347-1 apply
15 Construction
The requirements of clause 15 of IEC 61347-1 apply
16 Creepage distances and clearances
The requirements of clause 16 of IEC 61347-1 apply
17 Screws, current-carrying parts and connections
The requirements of clause 17 of IEC 61347-1 apply
18 Resistance to heat, fire and tracking
The requirements of clause 18 of IEC 61347-1 apply
19 Resistance to corrosion
The requirements of clause 19 of IEC 61347-1 apply
20 Annexes
The requirements of the annexes of IEC 61347-1 apply as appropriate
Page 7
EN 61347−2−11:2001
© BSI 7 March 2002