BS EN 4604 002 2009 ICS 49 060 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BRITISH STANDARD Aerospace series — Cable, electrical, for signal transmission Part 002 General Th[.]
Trang 1BS EN 4604-002:2009
ICS 49.060
NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW
BRITISH STANDARD
Aerospace series —
Cable, electrical, for
signal transmission
Part 002 : General
Trang 2This British Standard
was published under the
authority of the Standards
Policy and Strategy
Committee on 31 October
2009.
© BSI 2009
ISBN 978 0 580 61444 6
Amendments/corrigenda issued since publication
Date Comments
BS EN 4604-002:2009
National foreword
This British Standard is the UK implementation of EN 4604-002:2009 It supersedes BS EN 4604-002:2006 which is withdrawn
The UK participation in its preparation was entrusted to Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology
A list of organizations represented on this committee can be obtained on request to its secretary
This publication does not purport to include all the necessary provisions
of a contract Users are responsible for its correct application
Compliance with a British Standard cannot confer immunity from legal obligations.
Trang 3BS EN 4604-002:2009 EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2009
English Version
Aerospace series - Cable, electrical, for signal transmission -
Part 002: General
Série aérospatiale - Câbles électriques pour transmission
de signaux - Partie 002: Généralités
Luft- und Raumfahrt - Elektrische Leitungen fur Signalubertragungen - Teil 002: Allgemeines
This European Standard was approved by CEN on 20 June 2009
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member
This European Standard exists in three official versions (English, French, German) A version in any other language made by translation under the respons bility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom
EUROPEAN COMMITTEE FOR STANDARDIZATION
C O M I T É E U R O P É E N D E N O R M A L I S A T I O N
E U R O P Ä I S C H E S K O M I T E E FÜ R N O R M U N G
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members
Ref No EN 4604-002:2009: E
Trang 4BS EN 4604-002:2009
EN 4604-002:2009 (E)
2
Foreword 3
1 Scope 4
2 Normative references 4
3 Terms and definitions 5
4 List of product standards 5
5 Materials and construction 5
6 Identification and marking 6
7 Technical specification 6
Trang 5BS EN 4604-002:2009
EN 4604-002:2009 (E)
3
Foreword
This document (EN 4604-002:2009) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN)
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN
This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2010, and conflicting national standards shall be withdrawn at the latest by March 2010
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights
This document supersedes EN 4604-002:2006
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom
Trang 6BS EN 4604-002:2009
EN 4604-002:2009 (E)
4
1 Scope
This standard specifies the list of product standards and common characteristics of signal transmission electrical cables for use in the on-board electrical systems of aircraft
2 Normative references
The following referenced documents are indispensable for the application of this document For dated references, only the edition cited applies For undated references, the latest edition of the referenced document (including any amendments) applies
EN 3475-100, Aerospace series — Cables, electrical, aircraft use — Test methods — Part 100: General
EN 3838, Aerospace series — Requirements and tests on user-applied markings on aircraft electrical
cables 1)
EN 4604-001, Aerospace series — Cable, electrical, for signal transmission — Part 001: Technical
specification
EN 4604-003, Aerospace series — Cable, electrical, for signal transmission — Part 003: Cable, coaxial
50 ohm, 200 °C, type WZ – Product standard
EN 4604-004, Aerospace series — Cable, electrical, for signal transmission — Part 004: Cable, microcoaxial,
high immunity, 50 ohms, 200 °C, type WS — Product standard
EN 4604-005, Aerospace series — Cable, electrical, for signal transmission — Part 005: Cable, coaxial,
75 ohms, 200 °C, type WL — Product standard 1)
EN 4604-006, Aerospace series — Cable, electrical, for signal transmission — Part 006: Cable, coaxial,
50 ohm, 200 °C, type WM – Product standard
EN 4604-007, Aerospace series — Cable, electrical, for signal transmission — Part 007: Cable, coaxial,
50 ohms, 200 °C, type WN — Product standard
EN 4604-008, Aerospace series — Cable, electrical, for signal transmission — Part 008: Cable, coaxial,
50 ohms, 200 °C, type WD – Product standard
EN 4604-009, Aerospace series — Cable, electrical, for signal transmission — Part 009: Cable, coaxial, light
weight, 50 ohms, 180 °C, type KW (light WN) — Product standard
EN 4604-010, Aerospace series — Cable, electrical, for signal transmission — Part 010: Cable, coaxial, light
weight, 50 ohms, 200 °C, type KX (light WD) — Product standard
TR 6058, Aerospace series — Cable code identification list 2)
1) Published as ASD Prestandard at the date of publication of this standard
2) Published as ASD Technical Report at the date of publication of this standard
Trang 7BS EN 4604-002:2009
EN 4604-002:2009 (E)
5
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 3475-100 apply
4 List of product standards
See Table 1
Table 1 Product
reference
Main use
Cable code
Impedance
Ω
Attenuation
at 1 GHz max Db per 100 m
External diameter nominal
mm
Type of screening
Others
EN 4604-003 up to 3 GHz WZ 50 ± 2 47 3,60 foil + braid − 65 °C to 200 °C
EN 4604-004 up to 3 GHz WS 50 ± 5 140 2,40 2 braids with foil − 55 °C to 200 °C
EN 4604-005 up to 3 GHz WL 75 ± 5 102 2,35 2 braids − 55 °C to 200 °C
EN 4604-006 up to 5 GHz WM 50 ± 3 40 3,85 foil + braid − 55 °C to 200 °C
EN 4604-007 up to 6 GHz WN 50 ± 3 15 8,0 foil + braid − 55 °C to 200 °C
EN 4604-008 up to 8 GHz WD 50 ± 2 28,6 7,70 2 braids − 55 °C to 200 °C
EN 4604-009 up to 6 GHz light weight KW 50 ± 3 15 7,50 foil + braid − 65 °C to 180 °C
light WN – full CCAL
EN 4604-010 up to 6 GHz light weight KX 50 ± 2 28,6 5,40 foil + braid − 65 °C to 200 °C
light WD
5 Materials and construction
The composition, dimensions and mass of the cable shall conform to the characteristics and values defined in the technical specification and product standards
Colour coding: See product standard
Trang 8BS EN 4604-002:2009
EN 4604-002:2009 (E)
6
6 Identification and marking
The identification and marking of cables by the manufacturer shall be in accordance with EN 4604-001
Colour of the marking: See product standard
As the designation required for orders is generally too long for use in electrical drawings, a shorter cross designation (without colour information) is given by TR 6058
EXAMPLE Designation: EN 4604-003 Cross reference WZ
This shorter designation is used for identification and marking as the following example (see Figure 1):
EN WZ DE G 00
Reference to EN-standard cable
2 mandatory spaces
Type code
Manufacturer country code
Manufacturer code
Year of manufacturing
Figure 1
The cables shall be capable of being printed with the user applied markings according to EN 3838 when applicable in the product standard
7 Technical specification
See EN 4604-001
Trang 9BS EN 4604-002:2009
This page has been intentionally left blank
Trang 10BS EN
4604-002:2009
BSI Group
Headquarters 389
Chiswick High Road,
London, W4 4AL, UK
Tel +44 (0)20 8996 9001
Fax +44 (0)20 8996 7001
www.bsigroup.com/
standards
BSI - British Standards Institution
BSI is the independent national body responsible for preparing British Standards It presents the UK view on standards in Europe and at the international level It is incorporated by Royal Charter
Revisions
British Standards are updated by amendment or revision Users of British Standards should make sure that they possess the latest amendments or editions
It is the constant aim of BSI to improve the quality of our products and services
We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover Tel: +44 (0)20 8996 9000 Fax: +44 (0)20 8996 7400
BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards
Buying standards
Orders for all BSI, international and foreign standards publications should be addressed to Customer Services Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996
7001 Email: orders@bsigroup.com You may also buy directly using a debit/credit card from the BSI Shop on the Website http://www.bsigroup.com/shop
In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested
Information on standards
BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service Various BSI electronic information services are also available which give details on all its products and services Contact Information Centre Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: info@bsigroup.com Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards For details
of these and other benefits contact Membership Administration Tel: +44 (0)20
8996 7002 Fax: +44 (0)20 8996 7001 Email: membership@bsigroup.com Information regarding online access to British Standards via British Standards Online can be found at http://www.bsigroup.com/BSOL
Further information about BSI is available on the BSI website at http://
www.bsigroup.com
Copyright
Copyright subsists in all BSI publications BSI also holds the copyright, in the
UK, of the publications of the international standardization bodies Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may
be reproduced, stored in a retrieval system or transmitted in any form or by any means – electronic, photocopying, recording or otherwise – without prior written permission from BSI
This does not preclude the free use, in the course of implementing the standard,
of necessary details such as symbols, and size, type or grade designations If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained
Details and advice can be obtained from the Copyright and Licensing Manager Tel: +44 (0)20 8996 7070 Email: copyright@bsigroup.com