Hướng dẫn kết nối mạng PLC
Trang 1Merlin Gerin SEPAM 2000 Open Processor Driver
Rev September, 1998
System Architecture
System 600 to Merlin Gerin Sepam 2000 Integration Architecture
IOS (Ethernet)
Insight Operator Workstation
Building Level Network (P2)
MBC
MBC Containing Open Processor with Sepam 2000 Driver
SCU
RS485
MerMerli Merlin Gerin Sepam 2000 J-Bus Network
Notes on System Architecture
The Merlin Gerin SEPAM 2000 driver provides communication between the Apogee/System 600
and the Merlin Gerin SEPAM 2000 network Each driver allows connection to up to 32 Merlin
Gerin SEPAM 2000 devices A separate driver is required for each panel per this number of
devices.
Functionality
The Merlin Gerin SEPAM 2000 driver performs basic monitoring and control functions It will
map specific Name points into the Apogee/System 600 so that they can be accessed by standard
applications such as PPCL, TOD, Trending, Enhanced alarms, Point Modules, and TIU Landis
& Staefa FLN devices are not supported by this open processor Total point count, including
virtual points in the driver, cannot exceed 2000 We do not affect, in any way, the operating
sequence or safeties as factory programmed into the Name panels.
Keys to Success
The SEPAM 2000 devices should be communicating with the Merlin Gerin SEPAM 2000 network
prior to startup.
Benefits
Bringing the Merlin Gerin SEPAM 2000 points into the Apogee/System 600 allows the Merlin
Gerin SEPAM 2000 and Apogee/System 600 systems to operate as a single system providing
Trang 2Page 2 of 2
marked advantages in reduced operating costs, reduced training and increased employee productivity, reduced maintenance, diagnostic capabilities to extend equipment life, and maximization of energy savings.
Products Supported
Merlin Gerin SEPAM 2000 models supported by the open processor driver include:
♦ All Merlin Gerin Sepam 2000 devices equipped with J - Bus communication option.
Point Data Supported
Because of the number of parameters supported by the Sepam 2000 OPD, two drops are required for the mapping of parameters to the OPD's database for each Sepam 2000 device Refer to the following pages for supported point data details.
Trang 3Page 3 of 6
The following parameters are to be mapped into "odd" numbered drops.
Sepam 2000
Register
System 600 Point Number
System 600 Address
System 600 Point Type
Parameter Description
64029 30 TCC1DD30 LAI nb of starts/start inhibit time delay
64128
64129
64132
64133
64136
64137
64140
64141
Trang 4Page 4 of 2
Sepam 2000
Register
System 600 Point Number
System 600 Address
System 600 Point Type
Parameter Description
Trang 5Page 5 of 6
The following parameters are to be mapped into "even" numbered drops.
Sepam 2000
Bit Address
System 600 Point Number
System 600 Address
System 600 Point Type
Parameter Description
Trang 6Page 6 of 2
Sepam 2000
Bit Address
System 600 Point Number
System 600 Address
System 600 Point Type
Parameter Description