1. Trang chủ
  2. » Công Nghệ Thông Tin

Tài liệu Using Device Manager in Windows 2000 Server docx

2 365 1
Tài liệu đã được kiểm tra trùng lặp

Đang tải... (xem toàn văn)

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Tiêu đề Using Device Manager in Windows 2000 Server
Thể loại Lab
Năm xuất bản 2002
Định dạng
Số trang 2
Dung lượng 8 KB

Các công cụ chuyển đổi và chỉnh sửa cho tài liệu này

Nội dung

Lab 7.1.7: Using Device Manager in Windows 2000 Server Estimated Time: 20 minutes Objective Upon completion of this lab, the student will be able to navigate the Device Manager, locat

Trang 1

1 - 2 IT Essentials II v2.0 - Lab 7.1.7 Copyright  2002, Cisco Systems, Inc

Lab 7.1.7: Using Device Manager in Windows 2000 Server

Estimated Time: 20 minutes

Objective

Upon completion of this lab, the student will be able to navigate the Device Manager, locate hardware, and manually reinstall a device

Equipment

• Windows 2000 Professional or Windows 2000 Server installed and configured

Scenario

Windows 2000 Server, has just been installed on a PC While testing devices, it is

determined that the CD-ROM is not working properly The problem can be resolved by uninstalling and reinstalling the CD-ROM device

Procedures

First, navigate through the device manager Then reinstall the CD-ROM driver

Step 1

Right-click on My Computer and select Properties List the different tabs available in the

System Properties window

Step 2

Click on the Hardware tab Now click on Device Manager Use the space below to

record what comes up on the screen

Step 3

Double-click on Keyboards The keyboard is displayed Double-click on the keyboard

What is the “Device Status”?

Step 4

Click on the Resources tab List the IRQ that the keyboard is using

Trang 2

2 - 2 IT Essentials II v2.0 - Lab 7.1.7 Copyright  2002, Cisco Systems, Inc

Step 5

Locate the CD-ROM device Double click the CD-ROM tab The CD-ROM installed on the system is displayed Double-click the system CD-ROM What tabs are listed? What do

the tabs contain?

Step 6

Click on the Drivers tab Click the Uninstall button Click OK The computer is

uninstalling the ROM When it is finished, look at the ROM device Is the CD-ROM device there? Why or why not?

Step 7

Reinstall the CD-ROM driver Click the Action button in the Device Manager Click Scan

for Hardware Changes What happened?

Is the CD-ROM drive in the Device Manager?

Reflection

How can using the Device Manager be beneficial to an administrator who is

troubleshooting the devices connected to the server?

Ngày đăng: 24/01/2014, 19:20

TỪ KHÓA LIÊN QUAN