NOTICE The correction made here is temporary. To make the change valid, you need to
3. Setting the macro detail
5.6 Importing PCB in the Recipe
5.6.1 Importing the NPM Recipe Data
The PCB data can be imported from the NPM Recipe data.
1 Choose a desired folder to import in the navigation area on the upper left of the screen.
2 Choose [Import] [Recipe] on the menu bar.
The <PCB import> window opens.
3 Click .
The <Open> window opens.
Project050601S-01E02
1
Project050602S-01E03
2
Project050601S-07E05
3
4 Choose the production data to import
5 Click [Open].
6 Click [Import].
To select the PCB to be imported, mark the desired checkbox on the PCB Name. All checkboxes are marked as default.
The PCB side having placement points is displayed in the PCB list. If there are
placement points on both sides, both front and back sides are displayed.
To overwrite onto the existing PCB data, check off ‘Overwrite existing PCB(s).’
Choose the processing when there is a discrepancy between the pattern data and position data.
Item
Import both Position Data and Pattern Data
Import Pattern Data and recreate Position Data
Recreate Pattern Data from Position Data
When the PCB is rotated 180 degree when imported, mark the checkbox of ‘Rotate Panel by180°’.
In such a case, the following window opens in import.
Project050601S-08E00
4
5
Project050601S-09E05
6
5.6 Importing PCB in the Recipe
7 Click [OK].
If the check is marked on ‘New’ in the PCB list, it indicates that the PCB is newly created.
If you want to import the part data as well, the part list is displayed. If the checkbox of ‘New’
in the part list is in the marked state, it indicates that the PCB is newly created.
Project050601S-05E02
7
PCB import setting item
Item Explanation
Filename Displays the selecting file path.
Checkbox Select the PCB to be imported. All checkboxes are marked as default.
PCB List – Import Source
‘Source PCB Name’ Displays a name of an import source PCB.
‘Source Revision’ Displays a revision version of an import source PCB.
‘Source Side’ Displays a side of an import source PCB either [Top] or [Bottom].
PCB List – Import Target
‘Target PCB Name’ Set a name of import target PCB.
‘Target Revision’ Set a revision version of an import target PCB.
‘Target Side’ Set a side of an import target PCB either [Top] or [Bottom].
‘Part Library’
‘As it is’ Specifies the destination to store the component data to be placed on the PCB. To select ‘Change To’ pull down list displays to select the library.
‘Change To’
‘Overwrite existing PCB(s)’ Specifies whether to overwrite the data when PCB data have been registered.
‘In case there is inconsistency’
‘Import both Position Data and Pattern Data’
Specifies the import method when there is a discrepancy between the pattern data and coordinate data.
For details of each item, see
( ‘5.6.1 ■Processing for the case when there is a discrepancy between the pattern data and position data’ )
‘Import Pattern Data and recreate Position Data’
‘Recreate Pattern Data from Position Data’
‘Part Data in PCB(s)’
‘Import Parts in PCB(s)’ Specifies whether to import component data used by the PCB.
‘When same part already exists’
‘Overwrite all data’ If the same part name has existed in the library, the data is overwritten and saved.
‘Overwrite nozzle number’ If a part of the same name exists in the same library, the nozzle number is overwritten and saved.
‘Overwrite Inspection Data only’
If the same part name has existed in the library, only the inspection data is overwritten and saved.
‘Do not overwrite’ If the same part name has existed in the library, the part is not imported.
‘Import Substitute Part Group’ Whether to import the substitution part group is specified.
‘Overwrite Substitute Part
Group’ Whether to overwrite the data when the substitution part group is imported is specified.
‘PCB Rotation’
‘Rotate PCB 180°’ Mark the checkbox if the PCB data rotates 180 degree and import as the data created for the line of different flow direction imports.
‘Skip Default’
‘Import Dispense/Inspection
Skip Setting as Skip Default’ Whether to import skip information of dispensing/component inspection/solder inspection in the production data into PCB is specified.
5.6 Importing PCB in the Recipe
Button
Button Explanation
[･･･] The dialog to select the file is displayed.
[Select all] / [Unselect all] Select/deselect all checkboxes of the PCB to import.
[Import] Begins the import process.
[Cancel] Cancels the import process.
Processing for the case when there is a discrepancy between the pattern data and position data
Position on the pattern data Data to be imported
• Importing both the position data and pattern data
Data are imported as they are without correction.
• Reconstructing the position data by importing the pattern data Regarding the pattern data as correct, the position data is corrected and then imported.
• Reconstructing the pattern data using the position data
Regarding the position data (first pattern) as correct, the pattern data is corrected and then imported.
Other position data (other than the first pattern) is also corrected following the pattern data and then imported.
5.6 Importing PCB in the Recipe