The DCP services used are described separately in the DCP specification. The DHCP, DNS, and LLDP specification do not define local service interfaces. Therefore, the implementation of the mentioned service primitives is local matter and not defined in this specification.
The following services are defined to read or write ASE attributes.
7.3.8.3.1 Read PDev Data
This confirmed service may be used to read the values of the attributes in PD IR Data, PD Sync Data, and PD IR Subframe Data. This service shall be used in conjunction with the implicit AR, IO AR or Supervisor AR.
The parameter structure and the meaning of the parameters is the same as described in the read service (see 7.3.1.4.1.1). PDev Data belongs to the device; thus solely the parameter Index indentifies the data record index as specified in IEC 61158-6-10.
The parameter Data has a service specific structure and meaning. Table 228 shows the specific elements of Data for this service.
Table 228 – Data elements of Read PDev Data
Parameter name service specific elements rsp cnf
Data PD IR Data C C(=)
Slot Number M M(=)
Subslot Number M M(=)
PD IR Global Data M M(=)
IR Data UUID M M(=)
Max Bridge Delay M M(=)
Number of Ports M M(=)
List of Port Delays M M(=)
Parameter name service specific elements rsp cnf
Max Port Tx Delay M M(=)
Max Port Rx Delay M M(=)
Max Line Rx Delay M M(=)
Yellow Time M M(=)
PD IR Frame Data M M(=)
Frame Data Properties M M(=)
List of IR Frame Data Elements M M(=)
Frame Send Offset M M(=)
Data Length M M(=)
Reduction Ratio M M(=)
Phase M M(=)
Frame ID M M(=)
Ethertype M M(=)
Rx Port M M(=)
Frame Details M M(=)
Tx Port Group M M(=)
Number Of Tx Port Group Array Elements M M(=)
Tx Port Group Array M M(=)
PD IR Begin End Data M M(=)
Red Guard M M(=)
Start of Red Frame ID M M(=)
End of Red Frame ID M M(=)
Number of Ports M M(=)
List of Ports M M(=)
Number of Assignments M M(=)
List of Assignments M M(=)
Tx Begin End Assignment M M(=)
Red Orange Period Begin M M(=)
Orange Period Begin M M(=)
Green Period Begin M M(=)
Rx Begin End Assignment M M(=)
Red Orange Period Begin M M(=)
Orange Period Begin M M(=)
Green Period Begin M M(=)
Number of Phases M M(=)
List of Phases M M(=)
Tx Phase Assignment M M(=)
Assigned Value For Reserved Begin M M(=) Assigned Value For Orange Begin M M(=) Assigned Value For Reserved End M M(=)
Rx Phase Assignment M M(=)
Assigned Value For Reserved Begin M M(=) Assigned Value For Orange Begin M M(=) Assigned Value For Reserved End M M(=)
PD Sync Data C C(=)
Parameter name service specific elements rsp cnf
PTCP Subdomain ID M M(=)
Reserved Interval Begin M M(=)
Reserved Interval End M M(=)
PLL Window M M(=)
Sync Send Factor M M(=)
Send Clock Factor M M(=)
PTCP Timeout Factor M M(=)
PTCP Takeover Timeout Factor M M(=)
PTCP Master Startup Time M M(=)
Sync Properties M M(=)
PTCP Master Priority 1 M M(=)
PTCP Master Priority 2 M M(=)
PTCP Subdomain Name M M(=)
PD IR Subframe Data C C(=)
List of Frames M M(=)
Frame ID M M(=)
SF IOCR Properties M M(=)
Distributed Watchdog Factor M M(=) Restart Factor for Distributed Watchdog M M(=)
DFP Mode M M(=)
DFP Redundant Path Layout M M(=)
DFP Direction M M(=)
SFCRC16 M M(=)
List of Subframe Data M M(=)
Position M M(=)
Data Length M M(=)
Data
This parameter contains the values of the object which has been read.
PD IR Data
This conditional parameter is present only if the interface has PD IR data. It is composed of the following elements:
Slot Number
This parameter contains the value of the corresponding attribute of the ASE object.
Subslot Number
This parameter contains the value of the corresponding attribute of the ASE object.
PD IR Global Data
This parameter is composed of the following list elements:
IR Data UUID
This parameter contains the value of the corresponding attribute of the ASE object.
Max Bridge Delay
This parameter contains the value of the corresponding attribute of the ASE object.
Number of Ports
This parameter contains the value of the corresponding attribute of the ASE object.
List of Port Delays
This parameter is composed of the following list elements:
Max Port Tx Delay
This parameter contains the value of the corresponding attribute of the ASE object.
Max Port Rx Delay
This parameter contains the value of the corresponding attribute of the ASE object.
Max Line Rx Delay
This parameter contains the value of the corresponding attribute of the ASE object.
Yellow Time
This parameter contains the value of the corresponding attribute of the ASE object.
PD IR Frame Data
This parameter is composed of the following list elements:
Frame Data Properties
This parameter contains the value of the corresponding attribute of the ASE object.
List of PD IR Frame Data Elements
This parameter is composed of the following list elements:
Frame Send Offset
This parameter contains the value of the corresponding attribute of the ASE object.
Data Length
This parameter contains the value of the corresponding attribute of the ASE object.
Reduction Ratio
This parameter contains the value of the corresponding attribute of the ASE object.
Phase
This parameter contains the value of the corresponding attribute of the ASE object.
Frame ID
This parameter contains the value of the corresponding attribute of the ASE object.
Ethertype
This parameter contains the value of the corresponding attribute of the ASE object.
Rx Port
This parameter contains the value of the corresponding attribute of the ASE object.
Frame Details
This parameter contains the value of the corresponding attribute of the ASE object.
Tx Port Group
This parameter contains the value of the corresponding attribute of the ASE object.
Number Of Tx Port Group Array Elements
This parameter contains the value of the corresponding attribute of the ASE object.
Tx Port Group Array
This parameter contains the value of the corresponding attribute of the ASE object.
IR Begin End Data
This parameter is composed of the following elements:
Red Guard
This parameter contains the value of the corresponding attribute of the ASE object.
Start of Red Frame ID
This parameter contains the value of the corresponding attribute of the ASE object.
End of Red Frame ID
This parameter contains the value of the corresponding attribute of the ASE object.
Number of Ports
This parameter contains the value of the corresponding attribute of the ASE object.
List of Ports
This parameter contains the value of the corresponding attribute of the ASE object.
Number of Assignments
This parameter contains the value of the corresponding attribute of the ASE object.
List of Assignments
This parameter contains the value of the corresponding attribute of the ASE object.
Tx Begin End Assignment
This parameter contains the value of the corresponding attribute of the ASE object.
Red Orange Period Begin
This parameter contains the value of the corresponding attribute of the ASE object.
Orange Period Begin
This parameter contains the value of the corresponding attribute of the ASE object.
Green Period Begin
This parameter contains the value of the corresponding attribute of the ASE object.
Rx Begin End Assignment
This parameter contains the value of the corresponding attribute of the ASE object.
Red Orange Period Begin
This parameter contains the value of the corresponding attribute of the ASE object.
Orange Period Begin
This parameter contains the value of the corresponding attribute of the ASE object.
Green Period Begin
This parameter contains the value of the corresponding attribute of the ASE object.
Number of Phases
This parameter contains the value of the corresponding attribute of the ASE object.
List of Phases
This parameter contains the value of the corresponding attribute of the ASE object.
Tx Phase Assignment
This parameter contains the value of the corresponding attribute of the ASE object.
Assigned Value For Reserved Begin
This parameter contains the value of the corresponding attribute of the ASE object.
Assigned Value For Orange Begin
This parameter contains the value of the corresponding attribute of the ASE object.
Assigned Value For Reserved End
This parameter contains the value of the corresponding attribute of the ASE object.
Rx Phase Assignment
This parameter contains the value of the corresponding attribute of the ASE object.
Assigned Value For Reserved Begin
This parameter contains the value of the corresponding attribute of the ASE object.
Assigned Value For Orange Begin
This parameter contains the value of the corresponding attribute of the ASE object.
Assigned Value For Reserved End
This parameter contains the value of the corresponding attribute of the ASE object.
PD Sync Data
This conditional parameter is present only if the interface has PD sync data. It is composed of the following elements:
PTCP Subdomain ID
This parameter contains the value of the corresponding attribute of the ASE object.
Reserved Interval Begin
This parameter contains the value of the corresponding attribute of the ASE object.
Reserved Interval End
This parameter contains the value of the corresponding attribute of the ASE object.
PLL Window
This parameter contains the value of the corresponding attribute of the ASE object.
Sync Send Factor
This parameter contains the value of the corresponding attribute of the ASE object.
Send Clock Factor
This parameter contains the value of the corresponding attribute of the ASE object.
PTCP Timeout Factor
This parameter contains the value of the corresponding attribute of the ASE object.
PTCP Takeover Timeout Factor
This parameter contains the value of the corresponding attribute of the ASE object.
PTCP Master Startup Time
This parameter contains the value of the corresponding attribute of the ASE object.
Sync Properties
This parameter contains the value of the corresponding attribute of the ASE object.
PTCP Master Priority 1
This parameter contains the value of the corresponding attribute of the ASE object.
PTCP Master Priority 2
This parameter contains the value of the corresponding attribute of the ASE object.
PTCP Subdomain Name
This parameter contains the value of the corresponding attribute of the ASE object.
PD IR Subframe Data
This conditional parameter is present only if the interface has PD IR subframe data. It is composed of the following elements:
List of Frames
This parameter consists of the following elements:
Frame ID
This parameter contains the value of the corresponding attribute of the ASE object.
SF IOCR Properties
This parameter consists of the following elements:
Distributed Watchdog Factor
This parameter contains the value of the corresponding attribute of the ASE object.
Restart Factor for Distributed Watchdog
This parameter contains the value of the corresponding attribute of the ASE object.
DFP Mode
This parameter contains the value of the corresponding attribute of the ASE object.
DFP Redundant Path Layout
This parameter contains the value of the corresponding attribute of the ASE object.
DFP Direction
This parameter contains the value of the corresponding attribute of the ASE object.
SFCRC16
This parameter contains the value of the corresponding attribute of the ASE object.
List of Subframe Data
This parameter consists of the following elements:
Position
This parameter contains the value of the corresponding attribute of the ASE object.
Data Length
This parameter contains the value of the corresponding attribute of the ASE object.
7.3.8.3.2 Read PD Real Data
This confirmed service may be used to make a combined read of PD Port Data Real, PD Interface MRP Data Real, PD Port MRP Data Real, PD Port FO Data Real, PD Interface Data Real and PD Port Statistic. This service shall be used in conjunction with the implicit AR, IO AR or Supervisor AR.
The parameter structure and the meaning of the parameters is the same as described in the read service (see 7.3.1.4.1.1). PD Real Data belongs to the device; thus solely the parameter Index indentifies the data record index as specified in IEC 61158-6-10.
The parameter Data has a service specific structure and meaning. Table 229 shows the specific elements of Data for this service.
Table 229 – Data elements of Read PD Real Data
Parameter name service specific elements rsp cnf
Data List of Submodules M M(=)
Slot Number M M(=)
Subslot Number M M(=)
PD Port Data Real C C(=)
Own Port ID M M(=)
List of Peers C C(=)
Peer Port ID M M(=)
Peer Chassis ID M M(=)
Line Delay M M(=)
Peer MAC Address M M(=)
MAU type M M(=)
RTClass3PortStatus M M(=)
Multicast Boundary M M(=)
Link State M M(=)
Media Type M M(=)
PD Interface MRP Data Real C C(=)
MRP Domain UUID M M(=)
MRP Role M M(=)
MRP Domain Name M M(=)
MRP Version M M(=)
MRP Params C C(=)
MRP Ring State Data C C(=)
PD Port MRP Data Real C C(=)
MRP Domain UUID M M(=)
PD Port FO Data Real C C(=)
Fiber Optic type M M(=)
Fiber Optic Cable type M M(=)
Parameter name service specific elements rsp cnf Fiber Optic Manufacturer Specific C C(=)
Vendor ID M M(=)
Manufacturer Specific Fiber Optic Data M M(=) Maintenance Required Power Budget M M(=) Maintenance Demanded Power Budget M M(=)
Error Power Budget M M(=)
PD Interface Data Real C C(=)
Chassis ID M M(=)
MAC Address M M(=)
IP Address M M(=)
PD Port Statistic C C(=)
ifInOctets M M(=)
ifOutOctets M M(=)
ifInDiscards M M(=)
ifOutDiscards M M(=)
ifInErrors M M(=)
ifOutErrors M M(=)
Data
This parameter contains the values of the object which has been read.
List of Submodules
This parameter is composed of the following list elements:
Slot Number
This parameter contains the value of the corresponding attribute of the ASE object.
Subslot Number
This parameter contains the value of the corresponding attribute of the ASE object.
PD Port Data Real
This conditional parameter is present only if the submodule is a port submodule. It is composed of the following elements:
Own Port ID
This parameter contains the value of the corresponding attribute of the ASE object.
List of Peers
This conditional parameter is present only if the port has known neighbors (i.e. the port is in state LINK UP and the neighbor supports LLDP and has already delivered the LLDP information). It is composed of the following elements:
Peer Port ID
This parameter contains the value of the corresponding attribute of the ASE object.
Peer Chassis ID
This parameter contains the value of the corresponding attribute of the ASE object.
Line Delay
This parameter contains the value of the corresponding attribute of the ASE object.
Peer MAC Address
This parameter contains the value of the corresponding attribute of the ASE object.
MAU type
This parameter contains the value of the corresponding attribute of the ASE object.
RTClass3PortStatus
This parameter contains the value of the corresponding attribute of the ASE object.
Multicast Boundary
This parameter contains the value of the corresponding attribute of the ASE object.
Link State
This parameter contains the value of the corresponding attribute of the ASE object.
Media Type
This parameter contains the value of the corresponding attribute of the ASE object.
PD Interface MRP Data Real
This conditional parameter is present only if the submodule is an interface submodule and supports MRP. It is composed of the following elements:
MRP Domain UUID
This parameter contains the value of the corresponding attribute of the ASE object.
MRP Role
This parameter contains the value of the corresponding attribute of the ASE object.
MRP Domain Name
This parameter contains the value of the corresponding attribute of the ASE object.
MRP Version
This parameter contains the value of the corresponding attribute of the ASE object.
MRP Params
This parameter contains the value of the corresponding attribute of the ASE object.
MRP Ring State Data
This parameter contains the value of the corresponding attribute of the ASE object.
PD Port MRP Data Real
This conditional parameter is present only if the submodule is a port submodule and supports MRP. It is composed of the following elements:
MRP Domain UUID
This parameter contains the value of the corresponding attribute of the ASE object.
PD Port FO Data Real
This conditional parameter is present only if the submodule is a fiber optic port submodule. It is composed of the following elements:
Fiber Optic type
This parameter contains the value of the corresponding attribute of the ASE object.
Fiber Optic Cable type
This parameter contains the value of the corresponding attribute of the ASE object.
Fiber Optic Manufacturer Specific
This conditional parameter is present only if the submodule is a fiber optic port submodule. It is composed of the following elements:
Vendor ID
This parameter contains the value of the corresponding attribute of the ASE object.
Manufacturer Specific Fiber Optic Data
This parameter contains the value of the corresponding attribute of the ASE object.
Maintenance Required Power Budget
This parameter contains the value of the corresponding attribute of the ASE object.
Maintenance Demanded Power Budget
This parameter contains the value of the corresponding attribute of the ASE object.
Error Power Budget
This parameter contains the value of the corresponding attribute of the ASE object.
PD Interface Data Real
This conditional parameter is present only if the submodule is an interface submodule.
It is composed of the following elements:
Chassis ID
This parameter contains the value of the corresponding attribute of the ASE object.
MAC Address
This parameter contains the value of the corresponding attribute of the ASE object.
IP Address
This parameter contains the value of the corresponding attribute of the ASE object.
PD Port Statistic
This conditional parameter is present only if the submodule is a port submodule. It is composed of the following elements:
ifInOctets
This parameter contains the value of the corresponding attribute of the SNMP ASE object.
ifOutOctets
This parameter contains the value of the corresponding attribute of the SNMP ASE object.
ifInDiscards
This parameter contains the value of the corresponding attribute of the SNMP ASE object.
ifOutDiscards
This parameter contains the value of the corresponding attribute of the SNMP ASE object.
ifInErrors
This parameter contains the value of the corresponding attribute of the SNMP ASE object.
ifOutErrors
This parameter contains the value of the corresponding attribute of the SNMP ASE object.
7.3.8.3.3 Read PD Expected Data
This confirmed service may be used to make a combined read of the expected data, i.e. PD Port Data Check, PD Port Data Adjust, PD Interface MRP Data Check, PD Interface MRP Data Adjust, PD Port MRP Data Adjust, PD Port FO Data Check, PD Port FO Data Adjust, PD
NC Data Check, PD Interface FSU Data Adjust and PD Interface Adjust. This service shall be used in conjunction with the implicit AR, IO AR or Supervisor AR.
The parameter structure and the meaning of the parameters is the same as described in the read service (see 7.3.1.4.1.1). PD Expected Data belongs to the device; thus solely the parameter Index indentifies the data record index as specified in IEC 61158-6-10.
The parameter Data has a service specific structure and meaning. Table 230 shows the specific elements of Data for this service.
Table 230 – Data elements of Read PD Expected Data
Parameter name service specific elements rsp cnf
Data List of Submodules M M(=)
Slot Number M M(=)
Subslot Number M M(=)
PD Port Data Check C C(=)
List of Peers C C(=)
Peer Port ID M M(=)
Peer Chassis ID M M(=)
Line Delay C C(=)
MAU type C C(=)
Link State C C(=)
Sync Difference C C(=)
MAU Type Difference C C(=)
PD Port Data Adjust C C(=)
Adjust Domain Boundary C C(=)
Adjust Multicast Boundary C C(=)
Adjust MAU type C C(=)
Adjust Peer to Peer Boundary C C(=)
Adjust DCP Boundary C C(=)
Adjust Preamble Length C C(=)
PD Interface MRP Data Check C C(=)
MRP Domain UUID M M(=)
MRP Check M M(=)
PD Interface MRP Data Adjust C C(=)
MRP Domain UUID M M(=)
MRP Role M M(=)
MRP Domain Name M M(=)
MRP Params M M(=)
PD Port FO Data Check C C(=)
Maintenance Required Power Budget M M(=) Maintenance Demanded Power Budget M M(=)
Error Power Budget M M(=)
PD Port FO Data Adjust C C(=)
Adjust Fiber Optic type M M(=)
Adjust Fiber Optic Cable type M M(=)
PD NC Data Check C C(=)
Maintenance Required Drop Budget M M(=)