Tài liệu Network Solutions Wireline Service Delivery Products for North America pdf

8 Metro Ethernet Ethernet Network Interface Unit ENIU .... With an integrated universal back-plane architecture, the system supports multiple interchangeable network and tributary interf

Fourth Edition

Network Solutions

Wireline Service Delivery Products for North America

4/08

Wireline Service Delivery Products

for North America

Table of Contents

Introduction 1

Pon Express™ 16 2

Next Generation SoNEt LoopStar® 800 3

LoopStar® 1600 5

LoopStar® 3600 8

Metro Ethernet Ethernet Network Interface Unit (ENIU) 11

OptEnet Optical Extension Platform 12

LoopStar® 780 23

LoopStar® 714 and 718 24

LoopStar® 711 25

LoopStar® 712 26

LoopStar® 722 27

LoopStar® 750 28

10 Mbps Ethernet Access Solutions WorldDSL™ Single/Dual-Pair G.SHDSL 29

t1 Service Delivery Solutions ThinMux™ Mulitplexer, HiGain® HMU-319, Wideband 3190 31

HiGain CO Shelves, Test Shelves and Cards/Management 32

HiGain HDSLx CO Line Unit, Remote Unit Modules, Repeater/Doubler Modules 33

Soneplex® Loop Extender and Broadband System Chassis 34

Soneplex® HDSLx CO, Doubler and Remote Modules 35

Fiber Optic DS1 Delivery Solutions 36

t1 Indoor Remote Enclosures HiGain® Remote Enclosures and Accessories 37

t1 outdoor Doubler and Remote Enclosures Radiator II/EnCaser® 819 38

Enterprise LAN Extension Solutions Campus-RS™: Remote Unit/Star Platform 39

Campus-RS™: Rate-Selectable SDSL Systems 41

Megabit Modems 42

DAML/DLC Solutions PG-Flex® Micro-DLC System 43

PG-Plus® Subscriber Carrier System 44

Wireless Gigabit Ethernet FlexWave™ Millimeter Wave 45 λ

ADC’s Wireline Service Delivery Products help you deliver high quality Ethernet and TDM in business services applications over Copper or Fiber Whether you are building a new network, expanding an existing network, or increasing the manageability and reliability of a network already in place, ADC has what you need Our Metro Ethernet, Next Generation SONET, T1 Service Delivery, and Campus products emphasize leading technology for maximum uptime, reliability, remote management and monitoring, with the flexibility to take advantage of any of your legacy installed base This focus on technology, quality, and manageability reduces your cost of ownership while delivering the highest quality services.

Learn More About Wireline Solutions

Within this catalog you’ll find product and ordering information for the most popular Wireline solutions Because we continually enhance our product portfolio and our specifications, we encourage you to visit our website or contact an ADC representative to keep pace with the latest innovations.

Wireline Service Delivery Products

for North America

Introduction

The PON (Passive Optical Network over wavelengths) Express 16 is the first transport platform

to use a Passive Optical Network (PON) architecture to break the access bottleneck Using Dense Wave Division Multiplexing (DWDM), the PON Express 16 provides cost-effective access to

business parks, campuses, and multi-dwelling unit/multi-tenant units over a shared network

infrastructure without sacrificing security or limiting bandwidth Up to 16 customers can be

simultaneously connected with each having up to 1Gbps dedicated, symmetrical bandwidth

Operationally, each Optical Network Terminal (ONT) is “colorless” which eliminates the sparing issue that plagues traditional DWDM systems and provides “plug-n-play” system provisioning

Distribution Hub FDH3000S providing a compelling solution unique to the industry.

Universal Transport Platform for Access Networks

oM Shelf and

Module

125 Mbps Ethernet Line Card for OLT PNY16-OCU-125

O r d e r i n g I n f o r m a t i o n

to cost-effectively deploy and manage TDM and Ethernet services to end-user customers from a single platform Designed for both central office and customer premises environments, the LoopStar 800

is ideally suited for all network deployment applications With an integrated universal back-plane architecture, the system supports multiple interchangeable network and tributary interface cards for easy and economical service deployments Combined with advanced management, control and protection features, the LoopStar 800 provides carriers the lowest total cost solution for delivering both TDM and Ethernet services.

LoopStar 800 Chassis Assembly LPS-FRM800-L2

2 Port OC-3 Optical I/F Unit - VT Switching Hardened, Requires SFP Optics LPS-TO3DH2xOC-3 Optical Interface Unit with STS-1 Switching LPS-XO3D0x/HOC-3 Optical Interface Unit with STS-1 Switching LPS-XO30x/H2xOC-12 Optical Interface Unit with STS-1 Switching LPS-XO12D0x/HOC-12 Optical Interface Unit with STS-1 Switching LPS-XO120x/H2xOC-12 Optical Interface Unit LPS-OC12D0x/HOC-12 Optical Interface Unit LPS-OC120x

4 Port OC-3 Optical Interface Unit Hardened Configurable, Requires SFP Optics LPS-OC3AH4xOC-3 Optical Interface Unit LPS-OC3Q0x2xOC-3 Optical Interface Unit LPS-OC3D0xOC-3 Optical Interface Unit LPS-OC30x8x100Base-T Ethernet LPS-EFS8

1GE-FX + 4X10/100Base-T Switched Ethernet (LS800/1600 Only) LPS-ET4GS

2 Port 1000Base-FX Ethernet Board, Hardened (Transparent, Without GE SFP Module)

LS800/1600 ONLY

LPS-EGT2H

4 Port FX Fast Ethernet LPS-ELS4/H14xDS1 Tributary Unit LPS-PLT101/H28xDS1 Tributary Unit LPS-PDT101/H3xDS3 Tributary Unit LPS-PLT301/H

12 Port DS3/STS-1 Mapper Unit Hardened LPS-PQT3A01H

12 Port DS3/STS-1 Protection Unit, Hardened LPS-PQT3BH

12 Port DS3 Remote Test/Protection Unit Hardened LPS-PQT3P01H

6 Port DS3 Transmux LPS-PDM3/H

6 Port DS3 Transmux Remote Test/Protection Unit LPS-PDM3P01

6 Port DS3 Transmux Remote Test/Protection Unit Hardened LPS-PDM3P01H84xDS1 Electrical Interface Board LPS-POI101/H24xDS3 Electrical Interface Board LPS-POI301/H

allows service providers to cost-effectively aggregate, deploy, and manage TDM and Ethernet services With its compact design and ability to scale from an OC-3 to an OC-192 network, the LoopStar 1600 provides a low-cost, high-growth solution for adding services at the central office or at the edge of the network

When used with the LoopStar 800 product, the LoopStar 1600 provides a cost-effective aggregation point for multiple subtending rings The LoopStar 1600 also can function as multiple virtual Add-Drop Multiplexers (ADMs) for hub node applications In addition, with its versatile cross-connect architecture and high port count, this platform is an efficient alternative to existing cross-connect systems that require significantly more rack space at two to three times the cost.

LoopStar 1600 Chassis Assembly LPS-FRM1600-L1LoopStar 1600 Enhanced Switching Unit LPS-I1AXCSCross-connect & System Control & Timing Board LPS-IXCSVTCross-connect & System Control & Timing Board (High Order) LPS-IXCSSTSOC-192 Optical Interface Unit (IR-2, LC) 40km LPS-OC19202OC-192 Optical Interface Unit (LS-64.2, LC) 80km, without BA LPS-OC19203OC-192 Optical Interface Unit (Le-64.2, LC) 60KM LS1600 Only without BPA LPS-OC19204OC-192 Optical Interface Unit (LR-2b, LC) 80KM LS1600 Only with BPA, DCU LPS-OC19205OC-192 Optical Interface Unit (40 wavelength, 100G, G.692) LPS-OC192WOC-48 Configurable Optical Interface Unit (without Optical Module) LS1600 Only LPS-OC48AOC-48 Optical Interface Unit LPS-OC480xOC-48 Optical Interface Unit (SR-1, LC) LPS-OC4804OC-48 Optical Interface Unit (IR-2, LC) LPS-OC4805OC-48 Optical Interface Unit (100KM, LC) LPS-OC4806OC-48 Optical Interface Unit (40 Wavelength, 100G, G.692, 170KM) LPS-OC48W01*OC-48 Optical Interface Unit (40 Wavelength, 100G, G.692, 640KM) LPS-OC48W02*

4 Port OC-12 Optical Interface Unit Configurable Hardened LPS-OC12AH4xOC-12 Optical Interface Unit LPS-OC12Q0x2xOC-12 Optical Interface Unit LPS-PLT101

2 Port OC-12 Optical Interface Unit (LR-2) LPS-OC12D0xOC-12 Optical Interface Unit (IR-1) LPS-OC120x

8 Port OC-3 Optical Interface Unit, Requires SFP Optics LPS-OC304xOC-3 Optical Interface Unit LPS-OC3Q0x2xOC-3 Optical Interface Unit LPS-OC3DOxOC-3 Optical Interface Unit LPS-OC30xNote: x = 1, 2, 3 (where 1 = 15 km, 2 = 40 km, 3 = 60 km)

*Contact customer service for correct part number used for a specific wavelength

2x1000Base-FX Ethernet Board (Transparent, without GE SFP module) LPS-EGT2H8x100Base-T Ethernet Board LPS-EFS8

4 Port OC-3 Optical Interface Unit Hardened Configurable, Requires SFP Optics LPS-OC3AH1GE-FX + 4X10/100Base-T Switched Ethernet (LS800/1600 Only) LPS-ET4GS

4 Port FX Fast Ethernet LPS-ELS4/H14xDS-1 Mapper Board LPS-PLT101/H28xDS-1 Mapper Board LPS-PDT101/H3xDS-3 Mapper Board LPS-PLT301/H6xDS-3 Mapper Board 1600 only LPS-PDT301/H

6 Port DS3 Transmux Hardened LPS-PDM301H

6 Port DS3 Transmux Remote Test/Protection Unit LPS-PDM3P01

6 Port DS3 Transmux Remote Test/Protection Unit Hardened LPS-PDM3P01H

12 Port DS3/STS-1 Mapper Unit Hardened LPS-PQT3A01H

12 Port DS3/STS-1 Protection Unit, Hardened LPS-PQT3BH

12 Port DS3 Remote Test/Protection Unit Hardened LPS-PQT3P01H

56xDS1 Electrical Interface Board LPS-PQI10112xDS3 Electrical Interface Board LPS-PQI30112xDS3 Electrical Interface Board (1:1 protection only) LPS-PQSI30124xDS3 Electrical Interface Board MINI-BNC LPS-POI301-1628xDS1+6xDS3 Electrical Interface Board LPS-PDI1301LS1600 Alarm, Timing and Extend Interface Unit LPS-IATE

Faceplate(rear) for 1600 LPS-BF

SFP 1310nm SM (10km) for Gigabit Ethernet Interface LPS-SFP1310SFP 1340nm SM (40km) for Gigabit Ethernet Interface LPS-SFP1340SFP 1510nm SM (10km) for Gigabit Ethernet Interface LPS-SFP1510SFP 1540nm SM (40km) for Gigabit Ethernet Interface LPS-SFP1540SFP 850nm MM (850m) for Gigabit Ethernet Interface LPS-SFP85Note: x = 1, 2, 3 (where 1 = 15 km, 2 = 40 km, 3 = 60 km)

z = requires SFPs

*Contact customer service for correct part number used for a specific wavelength

SONET Multi-Service Transmission Platform

that allows service providers to cost-effectively aggregate, deploy, and manage TDM and Ethernet services With its compact design and ability to scale from an OC-3 to an OC-192 network, the Metro

3600 provides a low-cost, high-growth solution for adding services at the central office or at the edge

of the network

When used with the LoopStar 800 or LoopStar 1600 products, the Metro 3600 provides a cost-effective aggregation point for multiple subtending rings The Metro 3600 also can function as multiple virtual Add-Drop Multiplexers (ADMs) for hub node applications In addition, with its versatile cross-connect architecture and high port count, this platform is an efficient alternative to existing cross-connect systems that require significantly more rack space at two

to three times the cost.

SONET Multi-Service Transmission Platform

LoopStar Metro 3600 chassis assembly LPS-FRM3600-L1LoopStar 3600 chassis with 1*48 DS3(BNC) and 2*56 DS1 LPS-FRM3600-L7LoopStar 3600 chassis with 2*48 DS3(BNC) LPS-FRM3600-L8LoopStar 3600 chassis with 4*56 DS1 LPS-FRM3600-L9

3600 groupware for 19"/23"frame installation, fiber management, brackets, rear cover

and door

LPS-3600-OFI

Cross-connect and system control and timing board (35G STSI/5G VT1.5) LPS-GXCS01-L1Cross-connect and system control and timing board (80G STSI/20G VT1.5) LPS-EXCS01-L1LoopStar metro 3600 system auxillary board LPS-AUX-L1OC-192 optical interface unit (IR-2, LC) 40km LPS-OC19202OC-192 optical interface unit (LS-64.2, LC) 80km, without BA LPS-OC19203OC-192 optical interface unit (Le-64.2, LC) 60KM LS1600 Only without BPA LPS-OC019204OC-192 optical interface unit (LR-2b, LC) 80KM LS1600 Only with BPA, DCU LPS-OC19205OC-192 optical interface unit (40 wavelength, 100G, G.692) LPS-OC192WOC-48 configurable optical interface unit (without Optical Module) LS1600 only LPS-OC48AOC-48 optical interface unit LPS-OC480xOC-48 optical interface unit (SR-1, LC) LPS-OC4804OC-48 optical interface unit (IR-2, LC) LPS-OC4805OC-48 optical interface unit (100KM, LC) LPS-OC4806

4 Port OC-12 optical interface unit configurable hardened LPS-OC12AHOC-12 optical interface unit (IR-1) LPS-OC120x

2 Port OC-12 optical interface unit (LR-2) LPS-OC12D0x

4 Port OC-12 optical interface unit (LR-2, LC) LS1600 Only LPS-OC12Q0x

O r d e r i n g I n f o r m a t i o n

Note: x = 1, 2, 3 (where 1 = 15 km, 2 = 40 km, 3 = 60 km)

*Contact customer service for correct part numbers for SFP and specific wavelengths

SONET Multi-Service Transmission Platform

8 Port OC-3 optical interface unit, requires SFP optics LPS-OC30

4 Port OC-3 optical interface unit hardened configurable, requires SFP optics LPS-OC3AH4xOC-3 optical interface unit LPS-OC3Q0x2xOC-3 optical interface unit LPS-OC3D0xOC-3 optical interface unit LPS-OC30x2x1000Base-FX ethernet board (transparent, without GE SFP module) LPS-EGT2H8x100Base-T ethernet board LPS-EFS8

1GE-FX + 4X10/100Base-T switched ethernet (LS800/1600 only) LPS-ET4GS

4 Port FX fast ethernet LPS-ELS4/H28xDS-1 mapper board LPS-PDT10228xDS1 mapper protection LPS-PDT1P026xDS-3 mapper board (transmux) LPS-PDM3D2H

6 port DS3 transmux/remote test protection unit LPS-PDM3P01/H12xDS3/STS1 mapper unit LPS-PQT3A01/H12xDS-3 mapper board LPS-PQT301x12xDS3 mapper protection LPS-PQT3P0112xDS3/STS1 mapper protection unit LPS-PQT3BFaceplate front (for XCS slot) LPS-XFF

56xDS1 electrical interface board (right side) LPS-PQI1R56xDS1 electrical interface board (left side) LPS-PQI1L48xDS3 electrical interface board (BNC – left side) LPS-PHI3A48xDS3 electrical interface board (BNC – right side) LPS-PHI3B48xDS3 electrical interface board (MINI-BNC – left side) LPS-PHI13C48xDS3 electrical interface board (MINI BNC – right side) LPS-PHI13DFaceplate rear for 3600 LPS-BFA

Note: x = 1, 2, 3 (where 1 = 15 km, 2 = 40 km, 3 = 60 km)

*Contact customer service for correct part numbers for SFP and specific wavelengths

O r d e r i n g I n f o r m a t i o n

For Ethernet services to fully deliver on the

promise of lower costs and higher reliability,

remote management of the network becomes

essential—especially as subscriber numbers

increase Remote isolation of troubles and

performance monitoring are minimum

requirements for carrier-class Ethernet service.

Service providers can now create an intelligent

Ethernet management platform with ADC’s

Ethernet Network Interface Unit (ENIU) Installed

at the remote premise, the ENIU provides the

demarcation point between the customer and carrier network By providing the ability to sectionalize the network at the customer interface, the ENIU enables the carrier to remotely assess whether trouble conditions reside within the carrier or customer network.

practices for DS1/DS3 architectures

Standards-based solution allows interoperability with switches, routers and test equipment

•

Features

Supports in-band remote signal loopback for troubleshooting and testing as well as remote failure

•

indications and link monitoring for checking service performance

Features UTP (RJ45) or SPF-based optical connectors for customer and carrier interface

•

Loss of power “cut through” ensures that electrical signal integrity is maintained on RJ45 interfaces if

•

power to the unit is lost

Configurable to 10Mbps or 100Mbps Ethernet or Gigabit Ethernet on carrier and customer demarcation

•

sides

Allows bandwidth allocation in 1 Mb increments

•

• Includes enclosed carrier-side interfaces with LED performance indicators on the front of the unit

Fully compliant with IEEE 802.3ah™ First Mile standards for OAM

Ethernet Network Interface Unit

10/100/1000 Mbps UTP to UTP ENI-EGXXEGXX1A

10/100/1000 Mbps UTP to UTP - AC Power ENI-EGXXEGXX1A-AC

of handling any network’s Ethernet or SONET media transitions Bridging the gap between legacy copper infrastructures and fiber growth, the OptEnet platform provides the most economical evolution path Integrated intelligence allows the user to remotely monitor system performance and transmit alarm conditions to upstream operational support systems Leveraging ADC’s leadership in connectivity solutions, the OptEnet platform provides the ideal solution for Ethernet extensions in support of

transparent LAN services or switch router interconnect requirements A variety of solutions are supported ranging from 10Mb/s Ethernet, OC-12 and Gigabit Ethernet.

optEnet 4-Port Modular Chassis

OptEnet™ Modular Chassis

The OptEnet chassis is a modular chassis, which enables multiple types of line cards deployed

simultaneously within the same chassis.

Power Supply Modules

The OptEnet chassis accepts power from DC sources Dual power supplies are deployed within the chassis to provide redundant power to all line cards along the back plane.

Chassis, rack mount, 1U,4-Port, N+1 power, CPU capable ADCCE1000AChassis, rack mount, 1U,4-Port, AC powered, 4-Port, CPU capable ADCCE1020AChassis, rack mount, 2U,12-Port, N+1 power, CPU capable ADCCE1100AChassis, rack mount, 2U,4-Port, AC powered, 14-Port ADCCE1400A

O r d e r i n g I n f o r m a t i o n

OptEnet +24Vdc power supply module ADCCE2200AOptEnet -48Vdc power supply module (100 W) - extended temperature ADCCE2400AOptEnet -48Vdc power supply module (100 W) – standard temperature ADCCE2410AOptEnet -48Vdc power supply module (50 W) – extended temperature ADCCE2450AOptEnet -48Vdc power supply module (100 W) – standard temperature, 14-port shell ADCCE2440A2RU AC power supply ADCCE2600A

optEnet 12-Port Modular Chassis

optEnet DC Power Supply Module

platform An alarm card is available if only local alarm indications are required The CPU and alarm card are optional Only one of the two modules can be deployed in the chassis, so the network administrator must determine which alarm notification method is preferable.

Alarm Card Features

Normally open and normally closed alarm contacts

•

Specifications

CoNStRUCtIoN CHARACtERIStICS

CPU

ALARM MoDULE

O r d e r i n g I n f o r m a t i o n

optEnet CPU

optEnet Alarm Module

Singlemode to Singlemode Optical Regeneration Line Card

that can be deployed in the OptEnet modular chassis The card is designed to regenerate optical signals transported over a singlemode link The card supports any protocol and data rate between 10 Mb/s to 2.488 Gb/s (OC-48)

oPtICAL PERFoRMANCE

O r d e r i n g I n f o r m a t i o n

Optical converter, SMF1310FPL-MMF1310LED, 10-622 Mbps, SC-SC, STD temp ADCPE6000A

Optical converter, SMF1310FPL-MMF1310LED, 10-622 Mbps, SC-SC, EXT temp ADCPE6001A

Optical converter, SMF1310FPL-SMF1310FPL, 2.488Gbps, LC-LC, 15km reach ADCPE6515A

Optical converter, SMF1310FPL-SMF1310FPL, 2.488Gbps, LC-LC, 40km reach ADCPE6540A

Optical converter, no SFP ADCPE6500A

optEnet Singlemode

to Singlemode optical Converter Module

Gigabit Ethernet Line Card

The OptEnet 1000Mb/s media converter line card is designed to convert optical signals to electrical signals The card supports 1000BASE-T data rates over UTP and singlemode or multimode fiber.

-9.5 dBm minimum

4 dBm maximum

1000Base-T 1000Mb/s UTP Category 5e (4-pair) 328 feet (100 m) RJ451000Base-LX 1000Mb/s 1300 nm singlemode fiber 6.2 miles (10 km) (8/125µm) SC1000Base-SX 1000Mb/s 850 nm multimode fiber 1804 feet (550m) SC

10/100 Mb/s Optical Ethernet Conversion Line Card

The OptEnet 10/100 Mb/s optical Ethernet conversion line cards are designed to convert optical signals

to electrical signals The line cards have an auto negotiation feature allowing them to detect and synchronize with either a 10Base-T or 100Base-TX signal The cards support 10Base-T and 100Base-T data rates over UTP and singlemode or multimode fiber

Ethernet Line Card

10Base-T 10 Mb/s UTP Category 3, 4 or 5 (2-pair) 100 m (328 feet) RJ45100Base-TX 100 Mb/s UTP Category 5 (2-pair) 100 m (328 feet) RJ45100Base-LX 10/100 Mb/s 1300 nm singlemode fiber 15 km (9.3 miles) SC100Base-LX 10/100 Mb/s 1800 nm singlemode fiber 40 km (24.8 miles) SC100Base-SX 10/100 Mb/s 850 nm multimode fiber 300 m (984 feet) SC100Base-FX 10/100 Mb/s 1310 nm multimode fiber 2 km (2562 feet) SC

10/100 Mb/s Optical Ethernet Conversion Line Card

Specifications

ELECtRICAL

PHYSICAL

100Base-SX, 850-nm, LED, SC (GR-1089 intra-office surge compliant) ADCPE4000A100Base-LX, 1310-nm, FP laser, SC (GR-1089 intra-office surge compliant) ADCPE4200A100Base-LH, 1310-nm, FP laser, SC, 40KM (GR-1089 intra-office surge compliant) ADCPE4240A100Base-FX, 1310-nm, LED, SC (GR-1089 intra-office surge compliant) ADCPE4400A

100Base-LX (Singlemode)

15 km

100Base-LX (Singlemode)

40 km

100Base-SX (Multimode)

100Base-FX (Multimode)

range

1270 to 1355 nm range

830 to 870 nm range

1270 to 1380 nm range

output optical

Power (XMt):

-15 dBm minimum-8 dBm maximum

-8 dBm minimum-2 dBm maximum

-17 dBm minimum-12 dBm maximum

-19 dBm minimum-14 dBm maximum

Input optical

Power (RCV):

-31 dBm minimum-7 dBm maximum

-34 dBm minimum-7 dBm maximum

-26 dBm minimum-12 dBm maximum

-32 dBm minimum-11 dBm maximun

Enabling network planners to bridge the gap between legacy copper infrastructure and new fiber plants, the OptEnet platform maximizes the distance and quality benefits of fiber in a high quality, standards- based solution A variety of data interfaces are supported ranging from 10Mb/s Ethernet to OC-12 to Gigabit Ethernet.

10/100Mbps UTP Category 5 328 feet (100m) 850nm multimode fiber 984 feet (300m) ADCST4000A-xx10/100Mbps UTP Category 5 328 feet (100m) 1310nm singlemode fiber 9.3 miles (15km) ADCST4200A-xx10/100Mbps UTP Category 5 328 feet (100m) 1310nm multimode fiber 6562 feet (2000m) ADCST4400A-xx1000Mbps UTP Category 5e 328 feet (100m) 850nm multimode fiber 1804 feet (550m) ADCST5000A-xx1000Mbps UTP Category 5e 328 feet (100m) 1310nm singlemode fiber 6.2 miles (10km) ADCST5100A-xx

"xx" – indicates the powering option selected: "AC" = AC power; "48" = -48Vdc

Data

Rate

Multimode optical

Singlemode optical

10/622Mbps 1310nm 1620 feet (500m) 1310nm 9.3 miles (15km) ADCST6000A-xx/

ADCST6001A-xx

PoWER

-8 dBm maximum -12 dBm maximum -14 dBm maximum

-8 dBm maximum -12 dBm maximum -11 dBm maximum

10/100 MB/S oPtICAL