Tài liệu Below Ground Fiber Cross-Connect Systems (FSS96) pdf

Below Ground Fiber Cross-Connect Systems FSS96 ADC's FSS96 Below Ground Fiber Cross-Connect Enclosure allows service providers the flexiblity to cost effectively meet their customer'

Below Ground Fiber

Cross-Connect Systems (FSS96)

ADC's FSS96 Below Ground Fiber Cross-Connect Enclosure allows service providers

the flexiblity to cost effectively meet their customer's service requirements

Features:

e 96 termination capacity with splicing

e Built-in cable management and slack storage facilities

e Hand hole, manhole, pole or aerial mounting

www.adc.com »* +1-952-938-8080 © 1-800-366-3891

www.adc.com

Below Ground Fiber Cross-Connect Systems

Application

The FSS96 is used at key FSAI flexibility points to:

¢ Optimize feeder and distribution plant fibers via cross-connect

e Reduce network operational costs

e Improve customer service levels

ib

Central Office

+1-952-938-8080 1-800-366-3891

ue Below Ground Fiber Cross-Connect Systems

° Application

Five round ports for cables 5-32 mm 710 mm (28")

(0.2"-1.25") (Cable seals add 100 mm

(4") to length)

240 mm 260 mm

1 (10.2")

Ground feed- Oval Port for (2) Mechanical through lug cables 10-25 mm dome-to-base Seal

(0.4"-1.0")

e 96 termination capacity with splicing

e Built in slack storage system allows use of single length patch cord within entire system

* Connect any feeder fiber to any distribution fiber with a 1.5 meter patch cord

e For use in aerial, pole mount, hand hole and manhole applications

e Base and dome closure allows easy access to terminations

¢ Cable entrance provisions for up to 12 OSP cables e® Cable blocking and bonding hardware provided

www.adc.com +1-952-938-8080 1-800-366-3891

Configured Closure Ordering Scheme

Catalog Number

FSS96-A — =

2 | SMFC | Number Between 02 and 12 |

3 | PCFC Zirconia Sleeve

4 SMST Splice Tray Type

| SMSC 2 | Single Fiber HS Fusi

8 | PCSC Zirconia Sleeve | | ingle ribet usion |

D | AFC E|ASC Pigtail Type

K | MMLC 0 | Adapters only

P | SMLC A | Single Fiber 900m

Y | ALX.5

Loaded Positions

B | 12 Fiber

C | 24 Fiber

D | 36 Fiber

E | 48 Fiber

F | 60 Fiber Cross Connect patch cords are ordered seperately G_| 72 Fiber - 1.5 meter long patch cords are recommended

H | 96 Fiber - Patch cord diameter should be 2.0 mm or less

* Configured closures come equipped with hardware for sealing the specified number of OSP cables

Web Site: www.adc.com

From North America, Call Toll Free: 1-800-366-3891 © Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 ¢ For a listing of ADC’s global sales office locations, please refer to our web site

ADC Telecommunications, Inc., RO Box 1101, Minneapolis, Minnesota USA 55440-1101

Specifications published here are current as of the date of publication of this document Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice At any time, you may verify product specifications by contacting our headquarters office in Minneapolis ADC Telecommunications, Inc views its patent portfolio as an important corporate asset and vigorously enforces its patents Products or features contained herein may be covered by one or more U.S or foreign patents An Equal Opportunity Employer

\FIED

£

tị

Oo

Cert

101672AE 12/05 Revision © 2004, 2005 ADC Telecommunications, Inc All Rights Reserved