1. Trang chủ
  2. » Giáo Dục - Đào Tạo

Tài liệu Cách viết một bài báo kỹ thuật (Tài liệu song ngữ Anh-Việt) ppt

13 5,4K 32

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Tiêu đề Cách viết một bài báo kỹ thuật
Người hướng dẫn Phó Giáo Sư Andy Tan
Trường học Queensland University of Technology
Chuyên ngành Mechanical, Manufacturing and Medical Engineering
Thể loại Tài liệu
Thành phố Brisbane
Định dạng
Số trang 13
Dung lượng 189 KB

Các công cụ chuyển đổi và chỉnh sửa cho tài liệu này

Nội dung

Một bài báo nghiên cứu tốt trình bày rõ ràng các vấn đề của bài báo là định địa chỉ, đưa ra giải pháp, và các kết quả đạt được.. Mục tiêu của bài báo là mô tả phương pháp dùng để giải qu

Trang 1

Writing the Technical Paper

Assoc Professor Andy Tan

School of Mechanical, Manufacturing and

Medical Engineering

Queensland University of Technology

George Street, Brisbane, Queensland 4002,

Australia

Email: a.tan@qut.edu.au

1 Introduction

Writing the technical paper is a difficult aspect

in communication It may be easier to talk

about a project than to write about it Written

language lacks the body language, gestures,

and intonation of spoken language Even

though we use the same words and phrases in

writing that we do in speaking, writing the

paper to report our research project is much

harder than presenting the project orally to an

audience We are unable to show body

language or intonation in writing For this

reason, technical paper seems dry and lacking

the passion and intensity we feel about our

topic

The purpose of a technical paper is to present

facts and ideas in direct and concise language

It is aimed at the readers' understanding, rather

than the imagination or emotions It has a

different purpose than creative writing Often

we can fully understand our project and even

explain it to an audience Writing the paper is

constraint by what should be included or taken

out, the format and length of the paper It is

essential to strive for economy of expression

by avoiding jargon, wordiness, and

redundancy Say only what needs to be said

Writing the technical paper requires a specific

structure Use active voice, avoid first person

references (normally for report writing), and

use correct grammar In addition, follow an

established presentation format There are

several acceptable formats for writing formal

papers

CÁCH VIẾT MỘT BÀI BÁO KỸ THUẬT

Phó Giáo sư: Andy Tan Đại học Queenland – Australia Email: a.tan@qut.edu.au

1 Giới thiệu:

Viết một bài báo kỹ thuật là một công việc khó Thật dễ dàng khi nói về một dự án nhưng rất khó khăn khi phải viết nó ra Ngôn ngữ viết không diễn tả được bằng cử chỉ, điệu bộ và âm điệu như ngôn ngữ nói Thậm chí ngay cả khi chúng ta sử dụng các từ và cụm từ tương tự như khi nói, viết bài báo để báo cáo công trình nghiên cứu của chúng ta thì khó hơn nhiều so với việc trình bày bằng lời trước thính giả Chúng ta không thể thể hiện ngôn ngữ cử chỉ hoặc ngữ điệu trong bài viết Vì lý do này, bài báo kỹ thuật có vẻ khô khan và thiếu cảm xúc và sức lôi cuốn

Mục đích của bài báo kỹ thuật là trình bày các sự kiện và ý kiến bằng ngôn ngữ súc tích Nhằm mục đích giúp người đọc hiểu được vấn đề mà không phải tưởng tượng hoặc cảm nhận Thường chúng ta có thể hiểu

và thậm chí giải thích dự án của chúng ta cho người nghe Viết báo bị hạn chế bởi nội dung, thể thức và độ dài của bài báo Điều cốt yếu là cố gắng hạn chế sự miêu tả bằng cách tránh viết dông dài, lan man và thừa Chỉ viết những gì cần nói

Viết báo kỹ thuật yêu cầu một cấu trúc đặc trưng Sử dụng ngôn từ tích cực, tránh tham khảo người đi trước (thường gặp trong viết báo cáo), dùng đúng ngữ pháp Thêm vào đó, theo sự hướng dẫn từ mẫu trình bày có sẵn Có một số mẫu để viết một bài báo

Trang 2

2 What is a Technical/Research

Paper?

A good research paper has a clear statement of

the problem the paper is addressing, the

proposed solution(s), and results achieved The

goal of a paper is to describe the technique/s

used to solve a problem/s and to ensure that

the next person takes advantage of some of

your best solutions It describes clearly what

has been done before on the problem, and

what is new The paper should also report on

the hard problems (and their solutions) and the

non-obvious mistakes (and how to avoid

them)

There are four types of technical results:

1 An algorithm;

2 A system of hardware and software

design, etc.;

3 A performance evaluation: obtained

through analyses, simulation or

measurements;

4 A theory: consisting of a collection of

theorems

A paper should focus on

 describing the results in sufficient

details to establish their validity;

 describing a new algorithm in clear,

precise way that allows the reader to

compare the algorithm to other

algorithms For example, most learning

algorithms can be viewed as optimizing

(at least approximately) some measure

of performance and addressing

fundamental questions;

 identifying the novel aspects of the

results, i.e., what new knowledge is

discovered and what makes it

non-obvious;

 all experiments must include measures

of uncertainty of the conclusions

(typically take the form of confidence

intervals, statistical tests, or estimates

of standard error);

 proper experimental methodology

employed;

 identifying the significance of the results: what improvements and impact

do they suggest;

2 Bài báo kỹ thuật/nghiên cứu là gì?

Một bài báo nghiên cứu tốt trình bày rõ ràng các vấn đề của bài báo là định địa chỉ, đưa ra giải pháp, và các kết quả đạt được Mục tiêu của bài báo là mô tả phương pháp dùng để giải quyết một vấn đề và chắc chắn rằng người khác đang mong đợi các giải pháp tối ưu của bạn Nó mô tả một cách cụ thể những gì những người đi trước đã làm, những gì mới Bài báo cũng nên nói rõ những vấn đề phức tạp (và những giải pháp) và những sai sót không nhìn thấy (và cách phòng tránh)

Có 4 dạng nghiên cứu kỹ thuật:

1 Giải thuật;

2 Thiết kế hệ thống phần cứng và phần mềm…;

3 Đánh giá hiệu suất: thông qua phân tích, mô phỏng hoặc đo đạt…;

4 Lý thuyết: Bao gồm việc thu thập các định lý

Một bài báo nên tập trung vào

- Trình bày các nghiên cứu một cách thật chi tiết, nhằm củng cố tính hiệu quả của nó;

- Trình bày giải thuật mới một cách rõ ràng, tỷ mỉ điều đó cho phép người đọc

so sánh giải thuật này với các giải thuật khác Ví dụ, hầu hết việc học các giải thuật có thể được xem như tối ưu một

số phép đo hiệu suất và xác định các câu hỏi cơ bản

- Nhận dạng định hướng nghiên cứu mới, …những kiến thức mới nào được phát hiện và những điều gì làm cho nó không được phát hiện

- Tất cả các thí nghiệm phải bao gồm việc kiểm chứng các kết luận chưa chắc chắn (vùng tin cậy, kiểm tra thống

kê hay ước lượng tiêu chuẩn lỗi);

Trang 3

- Phương pháp thí nghiệm thích hợp

được sử dụng;

- Nhận biết được ý nghĩa của các nghiên

cứu: những cải tiến và ảnh hưởng gì;

 conclusions drawn from results should

be clearly stated (Graphical display

and tables of experimental data can be

very);

 appendices for extended derivation of

long equations, detailed drawings of

experimental rigs, etc

3 Format of a Technical Paper

There are several acceptable formats for

writing formal papers The format for a

conference or journal paper is normally set by

the conference organizer or editor of the

journal, respectively, for consistency

Whichever format you choose, the technical

paper should include the following

components:

Example

Title

Keywords

Abstract

Introduction

Review of literature

Presentation of idea and/or Methodology

Discussion and Results

Conclusions and Recommendations

References

Appendix

3.1 Description of Headings

Title Page

The title page should contain key information

about your technical paper Besides the title

itself, the title page can include the authors'

names, the name of your school, the location

of your school (the city and state), and the

email address It may contain other information or pictures that will make it look more attractive, but these are not required The title page should look appealing without being cluttered

- Các kết luận có được từ các nghiên cứu phải rõ ràng (biểu đồ và các bảng

số liệu thực nghiệm);

- Bổ sung nguồn gốc của các công thức, vẽ chi tiết các bản vẽ thiết bị thí nghiệm,…

3.0 Thể thức một bài báo kỹ thuật

Có một số thể thức được áp dụng để viết các bài báo chính qui Dạng bài báo tạp chí hay hội nghị thường được thiết lập bởi người tổ chức hội nghị hoặc biên tập viên của tạp chí Bất cứ mẫu nào mà bạn chọn, bài báo kỹ thuật cũng nên bao gồm các thành phần sau:

Ví dụ:

Tiêu đề

Từ khóa Tóm tắt Giới thiệu Tổng quan Trình bày các ý kiến/ phương pháp

Các kết quả và Thảo luận Kết luận và đề xuất Tài liệu tham khảo Phụ lục

3.1 Trình bày phần tiêu đề

Trang tiêu đề Trang tiêu đề nên chứa thông tin cốt lõi về bài báo Bên cạnh bản thân tiêu đề, trang tiêu

đề có thể bao hàm tên tác giả, tên cơ quan, vị trí địa lý (thành phố và bang), địa chỉ email

Trang 4

Cũng có thể chứa một số thông tin khác hay

các hình ảnh nhằm làm tăng sức hấp dẫn,

nhưng không nhất thiết phải có Trang tiêu

đề nên trang trí hấp dẫn nhưng không nên

quá cầu kỳ

Abstract (proposed problem )

The abstract should be about 100-200 words in

length It is a statement of the problem you

will eventually identify and clearly describe

In the abstract you should express the central

concepts of the problem, followed by

statements that elaborate and generally explain

the problem The abstract is not the place for

the background information, nor justification

for the problem The problem statement should

be clear and the reader should not have to

search for the topic of the research paper

Introduction

In order to write an informative introduction

for your research paper, you should be very

familiar with your problem The introduction

should be a natural outgrowth of the research

you have done In fact, the introduction could

be written after the descriptions and

conclusions This will give you a good idea of

what to include in the introduction Your

introduction is a broad overview of what is

contained in the research paper without going

into great detail It should contain the

following four points:

a) a complete statement of the problem;

b) purpose - the background material and

reasons for conducting the study;

c) scope - the depth of the study and how

much is covered;

d) method of development

Problem Description

The problem description is a more specific

description of the problem than the

introduction Where the introduction is an

overview of the paper, the problem description

is an exact description of what is involved in the solution of the scientific problem It should include a description of the variables,

T

óm tắt Phần này khoảng 100-200 từ Dùng liệt kê vấn

đề mà bạn mô tả rõ ràng Trong phần tóm tắt nên biểu thị các khái niệm trọng tâm của vấn

đề, cùng với việc giải thích các vấn đề chung

và phức tạp Phần tóm tắt không thay cho phần thông tin phía sau cũng không phải là sự biện minh cho vấn đề Vấn đề nên tường minh và người đọc không phải tìm kiếm chủ đề của bài báo

Giới thiệu

Để viết phần mở đầu cho bài báo, bạn phải hiểu tường tận vấn đề Phần này mô tả ngắn gọn công việc nghiên cứu Trên thực tế, phần

mở đầu có thể được viết sau phần trình bày và kết luận Điều này sẽ giúp bạn có ý tưởng hay

để viết phần mở đầu Phần mở đầu là phần bao quát chung những nội dung trong bài báo mà không đi sâu vào chi tiết Thông thường gồm 4 điểm sau:

a Phát biểu đầy đủ vấn đề nghiên cứu

b Mục đích – Lý do và cơ sở để tiến hành nghiên cứu

c Mục tiêu –Mức độ và phạm vi nghiên cứu

d Phương pháp nghiên cứu

Thuyết minh

Trang 5

Trình bày đặc trưng của vấn đề Vì phần mở

đầu là giới thiệu khái quát, phần tổng quan

thuyết minh chính xác những nội dung trong

phần giải pháp của vấn đề khoa học Nó bao

gồm thuyết minh các biến,

the environment, and the constants used in the

problem In the problem description you will

set the stage for the mathematical modeling

process you will describe in the next section

In all descriptions of the processes for the

problem solution, you should avoid

depersonalization of the process The problem

description should include the scope of the

problem and any outside elements that would

affect the outcome of the problem

Review of Literature/Background

Present major publications (within the past 5

years) that are relevant to the ideas/points

given in the paper and discuss how these

previous techniques work and what are their

technical strengths and shortcomings Briefly

indicate any similarities and/or differences

between your work and those of others

Correctly cite sources and references using the

agreed-upon style

Do not downgrade other people's work just to

make your work look good Your work is good

only when it solves the problem Be fair in

criticism and support your views with

technical reasons, not personal opinions

Proposed Method of Solution (Approach)

The method of solution is a step by step

description of the problem solution The

methods section is a list of the tactics used for

the problem and allows the readers of your

paper to understand the objectives of your

study If they desire, they should also be able

to determine through reading the methods

section whether or not these objectives were

met You should plan your strategy for the

problem solution as you do your research You

may alter this strategy as you proceed with the

development of the problem Reasons for

change may be stated in the methods section

The methods section of the paper should be the easiest part to write

The methods section is also the place to describe the modeling process of your problem You should state explicitly the development of your mathematical model and explain it completely

môi trường và các hệ số được sử dụng Ở đây bạn cũng sẽ thiết lập phương trình trạng thái cho mô hình toán mà sẽ trình bày ở phần kế tiếp Khi trình bày quá trình giải quyết vấn đề, nên tránh nhân cách quá trìnhPhần tổng quan nên bao gồm phạm vi nghiên cứu và ảnh hưởng của các yếu tố bên ngoài đến kết quả nghiên cứu

Tổng quan Giới thiệu các tài liệu đã xuất bản (trong 5 năm trở lại đây) đã cung cấp những ý tưởng, quan điểm tin cậy cho bài báo và thảo luận cách thực hiện cũng như độ ổn định và những tồn tại của các kỹ thuật trước đó Nêu vắn tắt

sự khác và giống nhau giữa công trình nghiên cứu của mình và của những tác giả trước đó Các tài liệu được trích dẫn, sử dụng và đề cập tới để bàn luận trong công trình nghiên cứu Không nên đánh giá thấp công trình nghiên cứu của người khác nhằm đề cao công trình nghiên cứu của mình Công trình nghiên cứu của bạn chỉ có thể tốt khi giải quyết được vấn đề Hãy phê bình một cách công bằng và chứng minh quan điểm của bạn trên cơ sở những lập luận khoa học, không dựa vào cảm tính

Giải pháp Giải pháp trình bày cách giải quyết vấn đề theo từng bước Phần giải pháp được liệt kê các chiến lược thực hiện và cho phép người đọc có thể hiểu nội dung công trình nghiên cứu của bạn Nếu họ muốn, họ có thể xác định thông qua việc đọc phần giải pháp

Bạn lên kế hoạch chiến lược để giải quyết vấn

đề cũng như thực hiện việc nghiên cứu Có thể phải thay đổi chiến lược theo sự tiến triển của vấn đề Các lý do để thay đổi được đề cập

Trang 6

trong phần giải pháp Phần giải pháp là phần

dễ viết nhất

Phần phương pháp cũng là nơi mô tả phương

pháp mô hình hóa Bạn nên trình bày rõ ràng

sự phát triển của mô hình toán học và giải

thích đầy đủ về nó Liệt kê các lý do để lựa

chọn mô hình này và giải thích các biến được

dùng trong mô hình

List your reasons for choosing this model and

explain the variables used List all equations

and functions you used in your mathematical

model, and state the identity of the variables in

each You should fully explain the procedures

used for the problem solution and explain each

step in the procedure Completeness is

important in the methods section Anything

you can say that will validate your study

should be included in the methods section

a) Theoretical model and analysis

Present an in-depth discussion of the

theoretical aspects of your proposed approach

Use fundamental theory (EE, Math, Physics,

etc.), circuit design, circuit analysis,

algorithms, etc Analyze the efficiency of your

approach after the presentation, again using

theoretical analysis Analyze the complexity,

overhead, cost, etc of your approach This is

the most important part of the paper All

approaches must be theoretically solid and

justifiable Trial-and-error and lucky good

guesses are not acceptable

Equations are typically formatted with the

equation indented from the text and the

equation number posted to the right (against

the right margin of the text).  Some times it is

necessary for the author to provide details on

the variables after the equation is posted.  For

instance, if your document does not have a

nomenclature and you have not explained the

variables in your equation, how can the reader

supposed to know what the variables mean? 

In this case, you should present a list which

matches the variables to their names and units

as seen below

 = F (L – x) t / I Equation (1)

Where,

F = Force at end of beam

L = Length of beam

I  = 2nd Area moment of inertia

x = Distance from the base of the beam to the point of interest

t =  Thickness of beam Liệt kê tất cả các hàm và công thức được sử dụng trong mô hình toán, và các biến trạng thái một cách tường minh Bạn nên giải thích chi tiết qui trình giải quyết vấn đề và giải thích từng bước trong qui trình Trong phần giải pháp sự thành công là yếu tố quan trọng Những vấn đề mà bạn trình bày sẽ kiểm chứng quá trình nghiên cứu của bạn

a) Mô hình lý thuyết và phân tích Trình bày cơ sở lý thuyết để đạt được mục đích Sử dụng cơ sở lý thuyết (toán học, vật lý,

…), thiết kế mạch, phân tích mạch, giải thuật,

…Phân tích hiệu quả cách tiếp cận sau khi trình bày, sử dụng lại việc phân tích lý thuyết Phân tích mức độ phức tạp, thời gian, chi phí Đây là phần quan trọng nhất của bài báo Tất

cả các phương pháp tiếp cận phải được lý thuyết bảo đảm và chắc chắn Thử sai và may mắn trong ước tính đều không được chấp nhận

Các công thức được định dạng giống nhau trong bài báo và số thứ tự của công thức được ghi ở bên phải (sát với lề phải của trang báo) Đôi lúc cần phải chú thích chi tiết các thành phần trong công thức ngay bên dưới công thức Chẳng hạn, nếu bài báo của bạn không

có phụ lục và cũng không giải thích các phần

tử trong công thức, thì người đọc làm sao có thể biết được ý nghĩa của các phần tử đó? Trong trường hợp này, bạn nên liệt kê các tham số trong công thức tương ứng với tên và đơn vị đo như sau:

 = F ( L – x ) t / I (1) Trong đó:

Trang 7

F = tổng các lực tác động lên con lắc

L = chiều dài của con lắc

I = momen quán tính

x = khoảng cách từ vị trí cân bằng đến

vị trí khảo sát

t = bề dày của con lắc

If you paper contains a nomenclature, it is not

necessary to provide the names and units of

the variables in an equation unless you think it

helps to make a point

b) Simulated study

Simulation is used to support your theoretical

studies Generate figures and / or tables of

results and compare with them to support the

theoretical analysis Choose realistic case

studies, not just those that your approach

happens to work well Do not choose "toy"

problems as case studies

c) Experimental Study

Simulation alone is not sufficient to support

your theory because simulation is not accurate

and does not include many real-life effects

High-quality conferences and journals demand

experimental results before publications Plan

the experiment well in advance since it takes a

long time to obtain real test data

Results and Discussion

The results section is a response to the

mathematical model The description of what

you observed from the execution of your

mathematical model comes first in your results

section Results should only be long enough to

present the evidence of your study

 Theoretical results may be plotted or

illustrated by figures and / or tables for later

comparison with simulated and experimental

results Compare experimental results with

simulated results and theoretical results

Discuss agreements and discrepancies

Tables are used as a means to quickly compare

information side-by-side.  Tables have a

heading which precedes the table, usually in a

font that is bold and larger than the text of the table   The headings of the table should be bold and contain information about the units for the data

Nếu bài báo đã có phần phụ lục thì không cần thiết phải ghi chú tên cũng như đơn vị đo của các tham số trong công thức trừ khi bạn cho rằng nó sẽ giúp làm nảy sinh vấn đề

b) Mô phỏng nghiên cứu

Mô phỏng được sử dụng để hỗ trợ cho việc nghiên cứu lý thuyết Các hình ảnh minh họa hay các bảng số liệu thực nghiệm và so sánh nhằm hỗ trợ cho việc phân tích lý thuyết Chọn các nghiên cứu mang tính thực tế, sẽ giúp cách tiếp cận vấn đề tiến triển tốt hơn

c) Nghiên cứu thực nghiệm Chỉ mô phỏng thì chưa đủ củng cố lý thuyết của bạn bởi vì mô phỏng thì không được chính xác và không có hiệu quả về thực tiễn Các hội thảo và tạp chí uy tín yêu cầu có kết quả thực nghiệm trước khi xuất bản Kế hoạch thực nghiệm phải được chuẩn bị trước vì sẽ mất rất nhiều thời gian để thu được dữ liệu thực tế Kết quả và Thảo luận

Phần kết quả là đáp ứng của mô hình toán học

Mô tả những gì mà bạn quan sát được từ việc thực hiện mô hình toán Các kết quả phải đủ sức thuyết phục để chứng minh nghiên cứu của bạn

Các kết quả mang tính lý thuyết có thể được vẽ hay minh họa bằng hình ảnh hoặc các bảng biểu để sau đó so sánh mô phỏng với các kết quả thực nghiệm So sánh các kết quả thực nghiệm với kết quả mô phỏng và kết quả trên

lý thuyết Thảo luận xem có phù hợp hay không

Bảng biểu được dùng như là phương tiện để so sánh thông tin một cách trực quan Bảng có

Trang 8

dòng tiêu đề đứng trước, thường sử dụng font

chữ đậm và lớn hơn các ký tự còn lại trong

bảng Các tiêu đề của các cột trong bảng nên

tô đậm và chứa thông tin về dữ liệu bên trong

Figures can contain many different types of

visual information.  Typically figures contain

either:

 Photographs (may or may not be

annotated)

 Charts or data plots

 Drawings or schematics

 Other visual information types can be

displayed

The text in the figure appears after the subject

of the figure.  The font of the figure title

should be bold and larger than the font of the

document text.  The figure and title should be

centered across the page or column of text. 

When referring to the figure in the text, one

may use one of the following formats (as long

as one is consistent in the use, i.e do not mix

and match Fig and Figure formats in the same

document):

Some examples of Figures are shown below:

Figure 1: Example Photograph With

Annotations

 

Hình trên có thể chứa nhiều loại thông tin khác nhau Hình thông thường có thể chứa:

 Hình ảnh (có thể có chú thích)

 Đồ thị hoặc biểu đồ dữ liệu

 Sơ đồ hoặc bản vẽ

 Một số thông tin khác…

Các ký tự trong hình vẽ xuất hiện sau chủ đề của hình Font chữ của tiêu đề nên tô đậm và lớn hơn các ký tự trong tài liệu Hình và tiêu

đề được đặt giữa trang hoặc giữa cột trong văn bản Khi đưa hình vào trong tài liệu, có thể tham khảo một trong các mẫu sau (cần nhất quán trong việc sử dụng…không lồng trộn và ghép các hình ảnh trong cùng 1 tài liệu):

Một số ví dụ:

Trang 9

Figure 1: Example Photograph With

Annotations

Figure 2: Example Plot

 

Figure 3: Example Chart/Drawing

 

Conclusion

The conclusion should be separate from the

results The conclusion is the section in which

you bring your mathematical model problem

back to the real world After the model has

been developed, the code written and

executed, the data obtained, and results of the

computational model are determined and written, the problem must them be brought back to the original situation The real world problem now must be analyzed and the model applied to it You should attempt to answer the question posed in the abstract and introduction

to your problem You could begin your conclusion by telling what you learned from your study Your conclusion should be analytical, interpretive, and include explanatory arguments You should be able to confirm your original theories with the development of the mathematical model You should be able to give evidence that your problem was solved by the results you obtained from the data

Kết luận

Phần kết luận phải tách biệt với phần kết quả Phần kết luận là phần mà bạn đưa mô hình toán trở về với thế giới thực Sau khi

mô hình được hoàn thiện, viết chương trình

và chạy chương trình, thu được dữ liệu, và

Figure 2: Example Plot

Figure 3: Example Chart/Drawing

Trang 10

kết quả mô hình hóa máy tính được xác

định và lưu lại, vấn đề phải được đưa về

trạng thái ban đầu Nghiên cứu trong thế

giới thực phải được phân tích và mô hình

ứng dụng nó Bạn nên tập trung để trả lời

các câu hỏi đã đề cập trong phần giới thiệu

và tóm tắt của bài báo Bạn nên bắt đầu các

kết luận bằng cách cho biết bạn rút ra được

điều gì từ việc nghiên cứu này Phần kết

luận nên phân tích, diễn dịch, và giải thích

các tranh luận Bạn có thể khẳng định lý

thuyết ban đầu với sự phát triển của mô

hình toán Bạn cũng có thể chứng minh

rằng vấn đề của bạn đã có lời giải từ kết

quả dữ liệu thu được

Future Work

Indicate the plans you have for future work on

the same problem, or modifications you might

make Also, if they exist, state the

ramifications of the results of your problem

and any future problems to which the

ramifications might lead

Reference

Follow recommended referencing format for

writing your reference Also observe the rules

for footnotes, citations, etc

Appendix

The following information should be found in

the appendix:

 a listing of your code or other

computational model;

 a copy of your raw data;

 all graphs generated to represent your

data;

 detailed derivation of lengthy

equations

4.0 Guides to Writing Technical Papers

The impact of a written report on a reader

depends not only on its content but also on its

format, style, and level of errors The most

brilliant ideas can be obscured by poor writing

because it projects to the reader an image of

the writer that is less than flattering While there are many accepted variations in the style and format of technical reports, there are some general guidelines that should be followed. 

I ERRORS

Outright mistakes are to be avoided at all costs A reader can become skeptical about the scientific validity of a paper whose author evidently does not understand high school English or does not take the time to proofread the paper Therefore, it is essential that the paper be proofread, preferably by someone in addition to the author, because extreme familiarity with the material makes it easy to miss mistakes

Hướng phát triển

Dự kiến hướng phát triển đề tài hoặc những cải tiến trong tương lai,

Tài liệu tham khảo Mẫu tài liệu tham khảo đề nghị được cho ở phần tham khảo Cũng có thể tuân thủ các qui tắt viết ghi chú, trích dẫn…

Phụ lục Các thông tin sau sẽ được tìm thấy trong phần phụ lục

Chương trình hoặc mô hình tính toán Bản sao dữ liệu thô

Tất cả các loại biểu đồ Khai triển chi tiết các công thức phức tạp

4.0 Hướng dẫn viết bài báo kỹ thuật

Tác động của bài báo đến người đọc không chỉ phụ thuộc vào nội dung mà còn phụ thuộc vào thể thức, văn phong và mức độ lỗi Những ý tưởng hay có thể bị lu mờ bởi một bài viết

Ngày đăng: 20/01/2014, 18:20

HÌNH ẢNH LIÊN QUAN

Hình trên  có thể  chứa   nhiều  loại  thông tin khác nhau. Hình thông thường có thể chứa: - Tài liệu Cách viết một bài báo kỹ thuật (Tài liệu song ngữ Anh-Việt) ppt
Hình tr ên có thể chứa nhiều loại thông tin khác nhau. Hình thông thường có thể chứa: (Trang 8)

TỪ KHÓA LIÊN QUAN

🧩 Sản phẩm bạn có thể quan tâm

w