Tài liệu FIBRO Compact Cam (FCC) Tool slides P2 ppt

max permanent stripping force* kN effective stripping force kN with option 1 effective stripping force kN with option 2 ** maximum effective stripping force kN*** FIBRO Compact Cam FCC T

Item No Description Term Order number 0° 5° 10° 15° 20° 25° 30° 35° 40° 45° 50° 55° 60° 65° 70° 75°

* option (order separately) 1.1.3

1.1.5

1.1.10

1.1.10

1.1.6

2.2.1

2.2.6 2.2.7

2.2.7

2.2.11 2.2.11

2.2.12

2.2.12

2.2.10

2.2.10

2.1.1

2.1.9

2.1.10

2.1.40 + 41

2.1.40 + 41

2.1.25 2.1.25

2.1.26

2.1.26

2.1.27

2.1.36

2.1.15

2.1.6

2.1.5

2.2.13 2.2.5 + 20

1.1.6

2.1.8

2.1.7

2.1.12 + 35

2.1.16

2.1.17

2.1.18

2.1.29 2.1.29

1.1.5 1.1.11

2.1.20

2.1.20

2.1.17

2.1.18

2.1.16

2.1.28

2.1.12 + 35

FIBRO Compact Cam (FCC)

Tool slides

FIBRO Compact Cam (FCC)

· 1

FIBRO Compact Cam (FCC) Tool slide

Maximum permissible working forces

50 75 75

75

500

45 225

75 75 75

The table below shows the slide surface at various angles and shows for the direction of movement

the maximum in kN which can be applied to the various areas The common centre of force has to be

determined for the various forces in the different areas of the working surface and compared with the tables The maximum forces always relate to slides with a full shoulder When an extra wide slide is selected, the

maximum permissible force for applying to the outer sections is 75% of the adjacent areas

FIBRO Compact Cam (FCC) Tool slides Maximum permissible working forces

45° shouldered

50 75 75

75

500

45 22

45° Supported by feather key

75 75 75

FIBRO Compact Cam (FCC) Tool slide

Maximum permissible working forces

50 75 75

75

500

45 225

75 75 75

· 1

Specifi c data:

Slide width 600 mm Working surface 600 x 225 mm Installation height 400 mm Slide working force 1400 kN

FIBRO Compact Cam

2016.25.060.

FIBRO Compact Cam (FCC)

Tool slides

driver only

for p

in d iam eter 1

6 (2 x)

for

n d iame ter 1

2 (2 x)

(650)*

* opitonal (see page 11+13)

FIBRO Compact Cam (FCC)

0° 380 112 295 340 370 305 305 85 222,5 280 55 280 350 20 270 40 5° 375 110 305 310 385 308 308 85 225,5 280 55 280 365 20 273 40 10° 375 110 305 310 385 302 302 85 204,5 280 55 280 365 20 252 40 15° 370 100 310 295 405 300 300 85 202,5 280 55 280 385 20 250 60 20° 360 90 285 295 410 270 270 85 172,5 280 55 280 390 20 220 90 25° 350 85 285 270 420 263 263 85 160,5 280 55 280 400 20 208 110 30° 335 80 285 265 425 258 258 85 155,5 280 55 280 405 20 203 120 35° 320 75 285 245 440 253 253 85 150,5 280 55 280 420 20 198 140 40° 310 70 285 225 450 247 247 85 144,5 280 55 280 430 20 192 150 45° 295 70 285 205 455 243 243 85 140,5 280 55 280 435 20 188 170 50° 305 70 285 123 480 239 264 235 136,5 160 25 195 455 25 184 170 55° 275 70 285 118 460 235 260 215 132,5 160 25 195 435 25 180 180 60° 255 70 265 113 470 212 237 225 119,5 160 25 195 445 25 167 180 65° 215 70 265 85 440 209 234 195 116,5 160 25 195 415 25 164 190 70° 195 70 265 85 435 207 232 190 114,5 160 25 195 410 25 162 205 75° 175 70 265 85 425 205 230 180 112,5 160 25 195 400 25 160 220

Guide values for force distribution

and shoulders

Working

angle

Working angle

max slide force

F s [kN] F

R1

[kN] F

R2

[kN] F

1

[kN] F

2

[kN] d

1

[mm] p

1

[mm]

0° 1400 1400 0 1175 1175 204 24

5° 1400 1292 102 1292 1170 186 24

10° 1400 1209 170 1209 965 186 24

15° 1400 1099 254 1309 947 177 36

20° 1400 1039 276 1238 760 177 54

25° 1400 927 342 1324 733 162 66

30° 1400 886 326 1265 565 159 72

35° 1400 772 374 1338 535 147 84

40° 1400 653 420 1400 500 135 90

45° 1400 528 462 1452 462 123 102

50° 1400 281 619 1592 520 75 102

55° 1400 268 535 1521 374 72 108

60° 1400 259 441 1467 255 69 108

65° 1400 0 592 1545 276 52 114

70° 1400 0 479 1490 174 52 123

75° 1400 0 362 1449 97 52 132

Order no working angle

reduction of the stripping force in (kN/100 kg) weight

max permanent stripping force*

(kN)

effective stripping force (kN) with option 1

effective stripping force (kN) with option 2 **

maximum effective stripping force (kN***)

FIBRO Compact Cam (FCC)

Tool slides

The following table shows the stripping force of the individual gas spring pairs and the maximum stripping

force when using all the gas spring pairs The maximum stripping force for other combinations (e.g

perma-nent + second option) can be calculated by totalling the individual forces The stripping forces stated apply to the working direction of the slide.

* the additional weight of the client tooling is not included

** only effective in the last 20 mm of slide travel

*** total of all gas spring packages (permanent + option 1 + option 2)

Example 1:

selected: 600 mm working width, 15° working angle, 150 kg calculated weight on the working surface,

1.4 kN calculated required stripping force

sought: suffi cient stripping force

At 15° working angle the required stripping force for 100 kg weight is 0.43 kN => At 150 kg weight

0.43 kN x 1.5 = 0.65 kN is required for resetting Maximum stripping force at 15° working angle with

permanent gas spring package is 4.8 kN 4.8 kN – 0.65 kN = 4.15 kN This value exceeds the required

stripping force so that there is no need to use the optional gas spring package in this application.

Example 2:

selected: 600 mm working width, 50° working angle, 300 kg calculated weight o on the working surface,

14 kN calculated required stripping force

sought: suffi cient stripping force.

At 50° working angle the required stripping force for 100 kg weight is 0.38 kN => At 300 kg weight

0.38 kN x 3 = 1.14 kN is required for resetting Maximum stripping force at 50° working angle with

permanent gas spring package is 4.1 kN 4.1 kN – 1.14 kN = 2.96 kN residual stripping force

14 kN – 2.96 kN = 11.04 kN, still required Option 1 gas spring package is required At 50° this package

has a stripping force of 29.2 kN, so that a total stripping force of 29.2 kN + 2.96 kN = 32.16 kN is available.

FIBRO Compact Cam (FCC)

This table lists the gas springs and their accessories required for increasing the stripping force

For additional information please see the section on Gas Springs in the FIBRO Main Catalogue.

Permanent gas spring package Optional gas spring package Optional gas spring pak-kage

Gas spring Gas spring Spacer

Securing screw 292.1

Gas spring Collar flange

2016.25.060.00.1000.00 0° 2487.12.00750.125 2487.12.02400.100 - - - ● ● - -2016.25.060.05.1000.00 5° 2487.12.00750.125 2487.12.02400.100 - - - ● ● - -2016.25.060.10.1000.00 10° 2487.12.00750.125 2487.12.02400.100 - - - ● ● - -2016.25.060.15.1000.00 15° 2487.12.00750.125 2487.12.02400.100 - - - ● ● - -2016.25.060.20.1000.00 20° 2487.12.00750.125 2487.12.02400.100 - - - ● ● - -2016.25.060.25.1000.00 25° 2487.12.00750.125 2487.12.02400.100 - - - ● ● - -2016.25.060.30.1000.00 30° 2487.12.00750.125 2487.12.02400.100 - - - ● ● - -2016.25.060.35.1000.00 35° 2487.12.00750.125 2487.12.02400.100 - - - ● ● - -2016.25.060.40.1000.00 40° 2487.12.00750.125 2487.12.02400.100 - - - ● ● - -2016.25.060.45.1000.00 45° 2487.12.00750.125 2487.12.02400.100 - - - ● ● - -2016.25.060.50.1000.00 50° 2487.12.00750.125 2487.12.02400.080 - - ● ● ● 2490.12.01000.025 ● 2016.25.060.55.1000.00 55° 2487.12.00750.125 2487.12.02400.080 - - ● ● ● 2490.12.01000.025 ● 2016.25.060.60.1000.00 60° 2487.12.00750.125 2487.12.02400.063 - - ● ● ● 2490.12.01000.025 ● 2016.25.060.65.1000.00 65° 2487.12.00750.125 2487.12.02400.063 - - ● ● ● 2490.12.01000.025 ● 2016.25.060.70.1000.00 70° 2487.12.00750.125 2487.12.02400.050 - - ● ● ● 2490.12.01000.025 ● 2016.25.060.75.1000.00 75° 2487.12.00750.125 2487.12.02400.050 - - ● ● ● 2490.12.01000.025 ●

Ordering example:

Selected slide: 2016.25.060.70.1000.00

With option 1 gas spring package

with option 2 gas spring package

The corresponding individual parts and the number required are shown in the table above

Option 1 gas spring package:

2x 2487.12.2400.050, Gas spring

2x 2016.25.060.50.1220.00, Spacer

2x 2016.25.060.00.1223.00, Holding plate

2x 2192.10.08.050, Securing screw

Option 2 gas spring package:

2x 2490.12.01000.025, Gas spring

2x 2480.057.00250, Collar fl ange

FIBRO Compact Cam (FCC)

Tool slides

1.1.1 1.1.2

1.1.5 1.1.5

1.1.10 1.1.10

1.1.6 1.1.6

1.1.11

1.1.11 1.1.6

2.2.1

2.2.6 2.2.7

2.2.7

2.2.11 2.2.11

2.2.12 2.2.12

2.1.1

2.1.9 2.1.10

2.1.8

2.1.40 + 41

2.1.40 + 41

2.1.25 2.1.25

2.1.26

2.1.26 2.1.27

2.1.29

2.1.29 2.1.11 + 35

2.1.36

2.1.15

2.1.6

2.1.5

2.1.7

2.1.11 + 35

2.1.16

2.1.16

2.1.17

2.1.17 2.1.18

2.1.18

2.1.28

2.1.28

2.1.12 2.1.12

2.1.20

2.2.13 2.2.5 + 20

FIBRO Compact Cam (FCC)

Tool slides

FIBRO Compact Cam (FCC)

1.1.1 1.1.2

1.1.5 1.1.5

1.1.10 1.1.10

1.1.6 1.1.6

1.1.11

1.1.11 1.1.6

2.2.1

2.2.6 2.2.7

2.2.7

2.2.11 2.2.11

2.2.12 2.2.12

2.1.1

2.1.9 2.1.10

2.1.8

2.1.40 + 41

2.1.40 + 41

2.1.25 2.1.25

2.1.26

2.1.26 2.1.27

2.1.29

2.1.29 2.1.11 + 35

2.1.36

2.1.15

2.1.6

2.1.5

2.1.7

2.1.11 + 35

2.1.16

2.1.16

2.1.17

2.1.17 2.1.18

2.1.18

2.1.28

2.1.28

2.1.12 2.1.12

2.1.20

2.2.13 2.2.5 + 20

Item No Description Term Order number 0° 5° 10° 15° 20° 25° 30° 35° 40° 45° 50° 55° 60° 65° 70° 75°

* option (order separately)

11

FIBRO Compact Cam (FCC) Tool slide

Maximum permissible working forces

The table below shows the slide surface at various angles and shows for the direction of movement

the maximum in kN which can be applied to the various areas The common centre of force has to be

determined for the various forces in the different areas of the working surface and compared with the tables The maximum forces always relate to slides with a full shoulder When an extra wide slide is selected, the

maximum permissible force for applying to the outer sections is 75% of the adjacent areas

60 90 90

90

600

45 225

90 90 90

FIBRO Compact Cam (FCC) Tool slides Maximum permissible working forces

45° shouldered

60 90 90

90

600

45 22

45° Supported by feather key

90 90 90

FIBRO Compact Cam (FCC) Tool slide

Maximum permissible working forces

60 90 90

90

600

45 225

90 90 90

Specifi c data:

Slide width 700 mm Working surface 700 x 225 mm Installation height 400 mm Slide working force 1600 kN

FIBRO Compact Cam

2016.25.070.

Front view, Front view

driver only

for pin di ame ter 16 (2x)

for p

in d iam eter 1

2 ( 2x)

FIBRO Compact Cam (FCC)

Tool slides

(750)*

* opitonal (see page 11+13)

FIBRO Compact Cam (FCC)

Angle β a b c d e f f1 g h k1 k2 l2 l3 l4 l5 l6 m3 p 0° 380 112 295 340 370 305 305 85 222,5 330 55 260 50 330 345 20 270 40 5° 375 110 305 310 385 308 308 85 225,5 330 55 260 50 330 360 20 273 40 10° 375 110 305 310 385 302 302 85 204,5 330 55 260 50 330 360 20 252 40 15° 370 100 310 295 405 300 300 85 202,5 330 55 260 50 330 380 20 250 60 20° 360 90 285 295 410 270 270 85 172,5 330 55 260 50 330 385 20 220 90 25° 350 85 285 270 420 263 263 85 160,5 330 55 260 50 330 395 20 208 110 30° 335 80 285 265 425 258 258 85 155,5 330 55 260 50 330 400 20 203 120 35° 320 75 285 245 440 253 253 85 150,5 330 55 260 50 330 415 20 198 140 40° 310 70 285 225 450 247 247 85 144,5 330 55 260 50 330 425 20 192 150 45° 295 70 285 205 455 243 243 85 140,5 330 55 260 50 330 430 20 188 170 50° 305 70 285 123 480 239 264 235 136,5 200 25 255 90 245 455 25 184 170 55° 275 70 285 118 460 235 260 215 132,5 200 25 255 90 245 435 25 180 180 60° 255 70 265 113 470 212 237 225 119,5 200 25 255 90 245 445 25 167 180 65° 215 70 265 85 440 209 234 195 116,5 200 25 255 90 245 415 25 164 190 70° 195 70 265 85 435 207 232 190 114,5 200 25 255 90 245 410 25 162 205 75° 175 70 265 85 425 205 230 180 112,5 200 25 255 90 245 400 25 160 220

Guide values for force distribution

and shoulders

Working

angle

Working angle

max slide force

F s [kN] F

R1

[kN] F

R2

[kN] F

1

[kN] F

2

[kN] d

1

[mm] p

1

[mm]

0° 1600 1600 0 1343 1343 238 28

5° 1600 1477 117 1477 1337 217 28

10° 1600 1381 195 1381 1103 217 28

15° 1600 1256 290 1496 1082 207 42

20° 1600 1188 316 1415 868 207 63

25° 1600 1060 390 1513 837 189 77

30° 1600 1013 373 1446 646 186 84

35° 1600 883 428 1529 611 172 98

40° 1600 746 480 1600 572 158 105

45° 1600 604 528 1659 528 144 119

50° 1600 321 708 1819 594 88 119

55° 1600 307 611 1739 428 84 126

60° 1600 296 504 1677 291 81 126

65° 1600 0 676 1765 315 61 133

70° 1600 0 547 1703 199 61 144

75° 1600 0 414 1656 111 61 154

FIBRO Compact Cam (FCC)

Tool slides

Example 1:

selected: 700 mm working width, 15° working angle, 180 kg calculated weight on the working surface,

1.4 kN calculated required stripping force

sought: suffi cient stripping force

At 15° working angle the required stripping force for 100 kg weight is 0.43 kN => At 180 kg weight

0.43 kN x 1.8 = 0.77 kN is required for resetting Maximum stripping force at 15° working angle with

permanent gas spring package is 4.6 kN 4.6 kN – 0.77 kN = 3.83 kN This value exceeds the required

stripping force so that there is no need to use the optional gas spring package in this application.

Example 2:

selected: 700 mm working width, 50° working angle, 370 kg calculated weight o on the working surface,

25 kN calculated required stripping force

sought: suffi cient stripping force.

At 50° working angle the required stripping force for 100 kg weight is 0.38 kN => At 370 kg weight

0.38 kN x 3.7 = 1.4 kN is required for resetting Maximum stripping force at 50° working angle with

permanent gas spring package is 4 kN 4 kN – 1.4 kN = 2.6 kN residual stripping force

2.6 kN – 25 kN = -22.4 kN, still required Option 1 gas spring package is required At 50° this package

has a stripping force of 29.2 kN, so that a total stripping force of 29.2 kN + 2.6 kN = 31.8 kN is available.

The following table shows the stripping force of the individual gas spring pairs and the maximum stripping force when using all the gas spring pairs The maximum stripping force for other combinations (e.g perma-nent + second option) can be calculated by totalling the individual forces The stripping forces stated apply to the working direction of the slide.

Order no working angle

reduction of the stripping force in (kN/100 kg) weight

max permanent stripping force*

(kN)

effective stripping force (kN) with option 1

effective stripping force (kN) with option 2 **

maximum effective stripping force (kN***)

* the additional weight of the client tooling is not included

** only effective in the last 20 mm of slide travel

*** total of all gas spring packages (permanent + option 1 + option 2)