Tài liệu Wireline Service Delivery Products For Global Markets pptx

6 Ethernet Access Products Ethernet Network Interface Unit ENIU.. The LoopStar 714 offers highly manageable 10/100 customer access and up to four T1/E1s eight T1/E1s for the LoopStar 718

Second Edition

Wireline Service Delivery Products For Global Markets

Wireline Service Delivery Products

For Global Markets

Table of Contents

Introduction 1

Multiservice Access and Transport Solutions LoopStar®714 and 718 2

LoopStar®711 3

LoopStar®712 4

LoopStar®722 5

LoopStar®750 6

Ethernet Access Products Ethernet Network Interface Unit (ENIU) 7

OptEnet Optical Extension Platform 8-9 E1 and Data Access Solutions WorldDSL™ G.SHDSL 10

Chassis 11

Management 12

Enclosures, Accessories 13-14 Enterprise LAN Extension Solutions Campus-RS™ 15-17 Megabit Modems 18

E1 and Fiber Solutions Soneplex®E1 Quad Loop Extender Module (EQLX) 19

Enterprise Data Management and Access Solutions PatchMate™ 20

PatchSwitch™ 20

Tiered Service Creation Solutions

SG-1 Service Gateway 21-22

5/06 • 101345AE

Founded in 1935, ADC has served the communications industry for more than half a century and today

is a leading supplier of global network infrastructure products and services Today, ADC providesinnovative network infrastructure solutions that enable high-speed Internet, data, video and voiceservices to residential, business and mobile subscribers

The company conducts business in more than 150 countries and operates approximately 120 facilities inthe following locations: Austria, Australia, Belgium, Brazil, Canada, Chile, China, France, Germany,Hungary, India, Indonesia, Italy, Japan, Malaysia, Mexico, New Zealand, Norway, the Philippines, PuertoRico, Russia, Singapore, South Africa, South Korea, Spain, Taiwan, Thailand, the United Arab Emirates,the United Kingdom, the United States, Venezuela and Vietnam

Customers around the world include leading communications service providers and enterprises of alltypes such as the Bank of England, BellSouth, Bloomberg, British Telecom, Chase Manhattan, Cingular,CitiBank, Deutsche Telekom, Glaxo Smith Kline, Hong Kong Telecom, Morgan Stanley, Nextel, RelianceTelecom (India), Qwest, T-Mobile, SBC, Seagrams, Sprint, Verizon, and many others

Learn More About Wireline Solutions

Within this catalog you’ll find product and ordering information for the most popular Wireline solutions.Because we continually enhance our product portfolio and our specifications, we encourage you to visitour website or contact an ADC representative to keep pace with the latest innovations

Wireline Service Delivery Products

For Global Markets

Introduction

The LoopStar 714 and LoopStar 718 are tailored to help service providers reach their off-net customers and reduce service fees at the same time The LoopStar 714 offers highly manageable 10/100 customer access and up to four T1/E1s (eight T1/E1s for the LoopStar 718) for the network connection These T1/E1s are bonded using the standard Multilink Point-to-Point Protocol (MLPPP), offering up to 12 Mb/s (T1) or 16 Mb/s (E1) of service Additional lines can

be added as necessary, and with a simple-to-use Graphical User Interface (GUI), provisioning new circuits has never been easier And the LoopStar products come equipped with LoopStar 700 intelligent management, designed to support remote service provisioning, verification, and troubleshooting From RMON counters and Ethernet / WAN loopbacks to a built-in Ethernet port Time Domain Reflectometry (TDR) test, from complete Layer 2+ classification and service definition to link quality monitoring and reporting, the LoopStar 714 and LoopStar 718 provide the flexibility and scalability to deliver customer-specific solutions and support with pinpoint accuracy.

Extend Ethernet Services Over Readily Available T1/E1 Facilities

O r d e r i n g I n f o r m a t i o n

LPS-714 AC Package (1 10/100, 1FX, no optics, 4-T1/E1)

rack mount brackets, license for basic software and documentation

LPS-714 DC Package, Temperature Hardened (1 10/100BT, 1FX, no optics,

4-T1/E1) *Includes: Internal dual feed - 48Vdc power supply, 19” and 23” LPS-714-48DC L1 rack mount brackets, license for basic software and documentation

LPS-714 24DC Package, Temperature Hardened (1 10/100BT, 1FX, no optics,

4-T1/E1) *Includes: Internal dual feed - 24Vdc power supply, 19” and 23” LPS-714-24DC L1 rack mount brackets, license for basic software and documentation

LPS-718 AC Package, (1 10/100BT, 1FX, no optics, 8-T1/E1)

rack mount brackets, license for basic software and documentation

LPS-718 48VDC Temperature Hardened, (1 10/100BT, 1FX, no optics, 8-T1/E1)

rack mount brackets, license for basic software and documentation

LPS-718 24DC Temperature Hardened, (1 10/100BT, 1FX, no optics, 8-T1/E1)

rack mount brackets, license for basic software and documentation

The LoopStar 711 is a fixed configuration, multi-service access platform offering cost-effective and to-manage Ethernet and TDM-based services that allow for the full utilization of fiber networks TheLoopStar 711 offers the complete suite of LoopStar 700 software, AC or DC power options, patentedT1/E1 circuit emulation, intelligent management and a mix of connectivity choices, creating a multi-serv-ice access platform remarkably versatile for its price point.

easy-The LoopStar 711 comes equipped with two 100Base-FX ports, four 10/100Base-T ports and twoT1/E1/J1 ports for circuit emulation services

The LoopStar 711 is uniquely designed to offer fiber extension transport, as well as the services thatrequire this transport Usually deployed at the customer premise, this product can create a resilient infra-structure ideally suited for a variety of applications

Extend Ethernet/TDM Services Over Fiber Networks

O r d e r i n g I n f o r m a t i o n

LPS-711 AC Package (2T1/E1, 4 10/100BT, 2FX, no optics)

19” and 23” rack mount brackets, console cable,

license for basic software and documentation

LPS-711-48VDC Package (2T1/E1, 4 10/100BT, 2FX, no optics)

19” and 23” rack mount brackets, console cable,

license for basic software and documentation

The LoopStar 712 offers the complete suite of LoopStar 700 software with full support for both

differentiated Ethernet or legacy services, AC or DC power options, intelligent management and a mix

of connectivity choices When used in conjunction with the Protected Switching Ring (PSR) technology,the LoopStar 712 can be used to build cost-effective resilient optical Ethernet rings at any size location,providing customers with the reliability and speeds they desire

The LoopStar 712 comes equipped with two Gigabit Ethernet ports, four 10/100Base-T ports and twoT1/E1/J1 ports with circuit emulation services

The versatility of the LoopStar 712 allows providers to reach small- to medium-size customers

and offer a wide variety of connectivity speeds and services In addition, these customers can takeadvantage of the sub-50 millisecond resiliency of PSR to ensure the reliable delivery of services Since theLoopStar 712 offers all of the same feature sets as the LoopStar 750 and LoopStar 722, it can also be acost-effective entry point to ensure all locations are equally serviced

Extend Ethernet/TDM Services to Single and Small Customer Locations

O r d e r i n g I n f o r m a t i o n

LPS-712 AC Package (2T1/E1, 4 10/100BT, 2GE, no optics)

19” and 23” rack mount brackets, console cable,

license for basic software and documentation

LPS-712-48VDC Package (2T1/E1, 4 10/100BT, 2FX, no optics)

19” and 23” rack mount brackets, console cable,

license for basic software and documentation

ADC’s LoopStar®722 is ideally suited for extending Ethernet and TDM-based services to multiplecustomer locations Typically deployed at the customer premise, the LoopStar 722 can be used as astandalone product for single customer applications, serve as an aggregator for leased access facilities’solutions, or even sub-tend off the larger LoopStar 750

The LoopStar 722 offers a combination of fixed configurations and an option slot, and provides thesame software base and feature set as the LoopStar 750

• Business-class Metro Ethernet services

• Carrier-class TDM over packet networks

• Protection from network failures

• LoopStar 700 in-band or out-of-board management

• Network processor-based architecture

• Compact, light weight design

A Flexible, Cost-Effective Solution for Extending the Metro Network—Further

O r d e r i n g I n f o r m a t i o n

LPS-722 AC Package (2T1/E1, 4BT, 1GE, 1 slot, no optics)

*Includes 1 AC power supply and AC power cord, blanking plate, 19” LPS-722-AC L1 and 23” rack mount brackets, console cable, license for basic software

and documentation

LPS-722-48VDC Package (2T1/E1, 4 BT, 1GE, 1 slot, no optics)

19” and 23” rack mount brackets, console cable,

license for basic software and documentation

Interface Cards

The LoopStar®750 is optimized for medium to large enterprises, multi-tenant buildings or

service aggregation This powerful unit is NEBS 3 certified and accommodates up to four plug-ininterface cards with a full range of Ethernet and TDM interfaces to support a variety of multiserviceapplications:

• Ethernet services over DS1, DS3 and SONET/SDH

• Multiservice Gigabit Ethernet

• T1, E1 or J1 transport over packet networks

• Transparent LAN service

• Supports Multiprotocol Label Switching (MPLS)

• Virtual Private LAN Service (VPLS)

19" and 23" rack mount brackets, console cable,

License for Basic Software and documentation

Interface Cards

For Ethernet services to fully deliver on the promise of

lower costs and higher reliability, remote management of

the network becomes essential—especially as subscriber

numbers increase Remote isolation of troubles and

performance monitoring are minimum requirements for

carrier-class Ethernet service

Service providers can now create an intelligent Ethernet

management platform with ADC’s Ethernet Network

Interface Unit (ENIU) Installed at the remote premise, the

ENIU provides the demarcation point between the

customer and carrier network By providing the ability to

sectionalize the network at the customer interface, the ENIU enables the carrier to remotely assess whether trouble conditions reside within the carrier or customer network

Benefits

• Saves operations time by limiting technician dispatch for troubleshooting and turn-up

• Reduces network downtime through proactive network management by remote access for testing and performance monitoring

• Enables quicker service restoration through single end testing of signal

• Increases network availability by accelerating network trouble repair cycle

• Easily integrates Ethernet network management into existing operations by mirroring current

maintenance practices for DS1/DS3 architectures

• Standards-based solution allows interoperability with switches, routers and test equipment

Features

• Supports in-band remote signal loopback for troubleshooting and testing as well as remote failure

indications and link monitoring for checking service performance

• Features UTP (RJ45) or SPF-based optical connectors for customer and carrier interface

• Loss of power “cut through” ensures that electrical signal integrity is maintained on RJ45 interfaces

if power to the unit is lost

• Configurable to 10Mbps or 100Mbps Ethernet or Gigabit Ethernet on carrier and customer demarcation sides

• Allows bandwidth allocation in 1 Mb increments

• Includes enclosed carrier-side interfaces with LED performance indicators on the front of the unit

• Fully compliant with IEEE 802.3ah™First Mile standards for OAM

• Accepts –48Vdc or AC power

Ethernet Network Interface Unit

Intelligent Ethernet Management Platform

Ethernet Network Interface Unit (ENIU)

Ethernet Network Interface Unit,

10/100/1000 Mbps UTP to UTP 10/100/1000 Mbps UTP to UTP - AC Power E/O ENIU, SET TOP 10/100/1000 MB UTP to GE Optical (requires SFP) E/O ENIU, AC, SET TOP 10/100/1000 MB UTP to GE Optical (requires SFP) O/O ENIU, SET TOP GE Optical to GE Optical (requires 2 SFPs)

O/O ENIU, AC, SET TOP GE Optical to GE Optical (requires 2 SFPs)

ENI-EGXXEGXX1A ENI-EGXXEGXX1A-AC ENI-OGXXEGXX1B ENI-OGXXEGXX1B-AC ENI-OGXXOGXX1 ENI-OGXXOGXX1B-AC

O r d e r i n g I n f o r m a t i o n

OptEnet™

Optical Extension Platform

The ADC OptEnet™optical extension platform is a carrier-class, intelligent, scalable platformcapable of handling any network’s Ethernet or SONET media transitions Bridging the gapbetween legacy copper infrastructures and fiber growth, the OptEnet platform provides themost economical evolution path Integrated intelligence allows the user to remotely monitorsystem performance and transmit alarm conditions to upstream operational support systems.Leveraging ADC’s leadership in connectivity solutions, the OptEnet platform provides the idealsolution for Ethernet extensions in support of transparent LAN services or switch router inter-connect requirements A variety of solutions are supported ranging from 10Mb/s Ethernet,OC-12 and Gigabit Ethernet

Features:

• Modular design enables line card diversity within the same chassis

• Extend central office interconnect between network elements when distances

are greater than 100 meters

• Ethernet delivery solution from central office to customer premises

• Reduce capital expenses associated with expensive optical line cards in network elements

• Auto-negotiation features eliminate the need for optical line card upgrade in network elements

• Redundant -48Vdc and +24Vdc power supplies

• Supports SNMP, TL1 and Telnet communication protocols

• Daisy-chain communication interfaces

• Supports 10Base-T, 100Base-TX and 1000Base-T UTP conversion to fiber

• Multimode fiber to singlemode fiber conversions

• Medium Dependent Interface Cross-over (MDI-X) eliminates network collisions

• NEBS Level 3, CE, UL and FCC standards compliant

5/06 • 101345AE

OptEnet™

Optical Extension Platform

OptEnet 12-Port Modular Chassis

OptEnet DC Power Supply Module

The OptEnet chassis is a modular chassis, which enables multiple types of line cards deployedsimultaneously within the same chassis

Power Supply Modules

The OptEnet chassis accepts power from DC sources Dual power supplies are deployed within thechassis to provide redundant power to all line cards along the back plane

Features

• Supports up to 12 OptEnet line cards in two rack units

• Supports up to 4 OptEnet line cards in one rack unit

• Accepts dual redundant power supplies

• 19 inches wide with 23-inch reverse mounting ears

• Optional SNMP, TL1 and/or alarm functionality

Features

• -48Vdc (50 W and 100 W) power supply versions

• +24Vdc (100 W) power supply

• Extended temperature versions available

• Power connection on the front panel

• Power and temperature status LEDs

Catalog Number

ADCCE1100A ADCCE1400A ADCCE1000A

Description

OptEnet modular chassis: 12-port

OptEnet modular chassis: 14-port

OptEnet modular chassis: 4-port

O r d e r i n g I n f o r m a t i o n

Catalog Number

ADCCE2200A ADCCE2400A ADCCE2410A ADCCE2450A ADCCE2440A

Description

OptEnet +24Vdc power supply module

OptEnet -48Vdc power supply module (100 W) - extended temperature

OptEnet -48Vdc power supply module (100 W) – standard temperature

OptEnet -48Vdc power supply module (50 W) – extended temperature

OptEnet -48Vdc power supply module (100 W) – standard temperature, 14-port shelf

O r d e r i n g I n f o r m a t i o n

OptEnet 4-Port Modular Chassis

E1 and Data Access Solutions

and Customer Premises

G.SHDSL Cards

ADC’s WorldDSL G.S is a family of high-speed G.SHDSL access devices complying with the ITU-T G.991.2G.SHDSL standard These modems are specifically designed for the diverse telecommunication needs ofglobal markets Ideal for telco and enterprise networks, WorldDSL G.S products conform to internationalstandards to ensure compatibility, performance and safety within your network environment

The new G.SHDSL modems are part of the broad family of WorldDSL HDSL modems and share commonchassis, enclosures, management software and accessories They are fully G.SHDSL compliant including36/72 timeslot operation and all required performance monitoring statistics Both G.821 and G.826statistics are provided for E1 ports giving users maximum flexibility Each WorldDSL G.S modem is

software-selectable as a communication master or communication slave, so any two units can be used for

a point-to-point circuit The modems are part of a fully managed system, interfacing with a VT100compatible terminal or a PC The units can be managed via their local craft port or a central managementcard installed in a CO shelf ADC’s StarGazer, Windows or UNIX-based SNMP management software can

be used to provision the system, collect alarm and performance data, and conduct diagnostic tests locally

or from a remote management station In any of these modes, the remote unit can be programmed andmanaged through the CO, minimizing travel to the outdoor site

WD921GN-XX-01 GS-2P-E1 Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD924GN-XX-01 GS-2P E1 & Serial Nx64 Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD920GN-1B-01 GS-2P + eBridge Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD921GN-1B-01 GS-2P E1 + eBridge Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD924GN-1B-01 GS-2P E1 & Serial + eBridge Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD921GL-XX-01 GS-2P LP E1 Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD924GL-XX-01 GS-2P LP E1 Serial Nx64 Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD920GL-1B-01 GS-2P LP + eBridge Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD921GL-1B-01 GS-2P LP E1 + eBridge Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD924GL-1B-01 GS-2P LP E1 & Serial + eBridge Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure

O r d e r i n g I n f o r m a t i o n