Tài liệu Ecodial V3.38 Low-voltage electrical installation design software Fupact and variable speed drive ppt

Ecodial V3.38Low-voltage electrical installation design software Building a New Electric World Fupact and variable speed drive integrated... With Ecodial V3.38, design low-voltage elec

Ecodial V3.38

Low-voltage electrical installation design software

Building a New Electric World

Fupact and

variable speed

drive integrated

With Ecodial V3.38, design low-voltage electrical installations the easy way

Ecodial V3.38 complies with

the latest electrical standards, bringing

LV installation design software to a

new level of performance.

Build your installation diagram quickly and easily by using standard electrical symbols from the toolbox (e.g transformer + conductor + protection)

You can even customise the toolbox by adding your own group of symbols to the library

You create your project with all the necessary general information:

b one window to enter project data (project name, customer name, etc.)

b another for the general electrical installation characteristics used for the calculations (earthing arrangement, cascading, etc.)

Default values can be modified and saved for future projects

All this information is used in the subsequent steps of the design process and for the printout of the project file It can be modified at any time

New standards

Ecodial V3.3 series have been approved

by the UTE

It can be used to produce design files complying

with:

b the CENELEC R 064-003 European

calculation guide

b IEC 364 installation standards

Any changes or amendments to these standards

will be covered by software updates made

available through your product support and/or

update contract

User friendly interface

b Unequalled flexibility

b Extremely clear windows and menus

b On-line help

Higher performance

b Adapts to user practices for maximum

effectiveness

b Perfect project design files every time

b Complete calculations

Personalise your project

Create your diagram

Operating principles

Optimise circuit-breaker curves

At any time, you can display the time-current curves

of the circuit-breakers to check discrimination between any two devices If necessary, optimise discrimination

by modifying the circuit-breaker settings The new curves are calculated and displayed immediately

Diagram

Power sum

Calculation

Print and Export project

Global electrical characteristics

Circuit default value

Display curves Calculation result

Schneider Offer

Association guide

Determine the source power

Just enter the current or power values for the various loads and the applicable diversity factor in the power sum window Ecodial V3.38 calculates the required source power, and can automatically balance single phase loads on three phase boards

Display the results at any time

The results of some or all of the installation calculations can be displayed:

b item names

b discrimination characteristics

b power sum (items + consumption + currents)

b results for calculated items

Step-by-step calculation

The preliminary results are displayed for each circuit:

b cable cross-sections with corresponding sizing criteria

b protective devices, Isc max (1, 2 or 3-phase), Isc min (1 or 2-phase), earth fault current, R, X, trip unit settings

b voltage drops, earth-fault protection Different simulations can be carried out at this stage to optimise the design Ecodial V3.38 continuously checks the calculations and compliance with standards (green flag beside circuit when the calculation has been successfull) For total security, the calculation is stopped if an error is detected Ecodial V3.38 also offers total interactivity between the calculations and the diagram (any modification in one

is immediately reflected in the other)

Print or export results

The Ecodial V3.38 print and export functions offer key features

The final results can be produced in three different forms:

b a complete printout, clearly presenting the project and demonstrating compliance with standards In addition to the calculation results, all the information required by the installer or panel-builder is automatically included (cable lists, equipment lists, device settings, etc.)

b export file containing the list of components

b export file in DXF or RTF format, for use by other software on the market

Print the project design file

With Ecodial V3.38, design low-voltage electrical installations

the easy way

For further details concerning Ecodial V3.38, ask your Schneider Electric representative for a free demonstration.

11 / 2006

Schneider Electric Industries SAS As standards, specifications and designs change from time to time, please ask for confirmation

of the information given in this publication.

Postal address

Customer Software

Meylan

FF 38050 Grenoble Cedex 9

http://www.schneiderelectric.com

Rcs Nanterre B 954 503 439

Conception : SIS, Insign’Studio Réalisation : Insign’Studio Impression : JPF Impression

This document has been printed on ecological paper.

b Fupact offer is perfectly integrated into

Ecodial

In Ecodial V3.38, the complete range of Fupact

is integrated: Fupact INF., Fupact ISFL and Fupact ISFT According to the Fupact offer, users can choose their standards of fuses (BS, Din or NFC) Ecodial V3.38 also takes Fupact discrimination principles into account

Now, Ecodial V3.38 brings to the users a wide choice of fuses:

v Range: Fupact, GK1, GS1, LS1, Multi 9, Diazed, aM, gG, gM

v Fuse-Combination Unit type: Switch disconnector, disconnector, without FCU

v Fuse type (standard): DIN (or NH), NFC, BS

v Fuse model: aM, gG, gM, Diazed

v New representations:

b Variable speed integrated

Ecodial V 3.37 already carried out the new products of the Altivar range: Altivar 11, 21, 31,

38, 61, 71 Ecodial V3.38 now also offers the

08, 28 & 68 Altivar series These new products enrich the motor starter catalogue Users are able to choose between direct on-line, start delta, soft starters and variable speed drives

b Among other features

v Reminder: A.52-10 to 13 IEC60364 table (current-carrying capacities in amperes) doesn’t apply any rated current value for CSA under 25 mm2 for F and G installation methods Now Ecodial calculates and optimises all CSA if the local installation standard allows it

v The maximum voltage drop authorised by the IEC60364 standard is for information only In Ecodial V3.38, the users are allowed to enter their own value However, if the voltage drop in the cable is greater than the value recommended by the standard, a message is displayed

v RCD protection for final circuits supplying sockets may be present on the circuit with the socket

or on an upstream circuit According IEC 60364 standard, Ecodial does not require additional RCD protection for final circuits supplying sockets

v LV/LV transformer: Ecodial accepts all primary voltages and gives more information into the calculation result like Transformer R phase, Transformer X phase, Primary ampere rating and Secondary ampere rating

Switch-disconnector

or fuse alone

Switch-disconnector

or fuse alone

b Recommended configuration

b PC with Pentium III processor 700 MHz or equivalent

b 128 Mb RAM

b System: Windows 2000, XP

b Screen: 1024x768 pixels (17' screen) or wider

b Compatible printer