Spec Active equipment manufacturers are increasingly building DWDM transceivers that use the multifiber MPO connector.. While the MPO provides a compact interface on the transceiver card
Trang 1Spec
Active equipment manufacturers are increasingly building DWDM transceivers that use the multifiber MPO connector While the MPO provides a compact interface on the transceiver card, most service providers require single-circuit access This creates the need for a conversion from the multifiber MPO to a single-fiber connector ADC’s Fiber Management Tray (FMT) is a compact two rack-unit termination panel that features industry-leading cable management and ADC’s sliding adapter packs, thereby enabling safe single-circuit access The FMT can also be configured with high-quality MPO to LC breakout cables that provide the connectivity between the DWDM transceiver and the FMT panel
Features and Benefits:
Low-loss MPO to LC breakout cables enable test access points for each card, provide
•
single-circuit access for moves, adds or changes and high-quality terminations induce
minimum insertion loss in circuit
Total front access termination drawer allows quick and easy connection between active
•
equipment and fiber distribution frame line-up
Industry-leading cable management protects bend radius, provides clean and organized
•
cable routing pathways and protects traffic-carrying fiber from physical damage
Sliding adapter packs grouped into counts of eight LC adapters allow access to each
•
individual fiber from one card, eliminating the possibility of disturbing adjacent fibers
Panel provides a demarcation point for MPO
•
Applications:
Designed to mount next to active equipment with MPO ports
•
DWDM – Dense Wavelength Division Multiplexer
•
ROADM – Reconfigurable Optical Add-Drop Multiplexer
•
Trang 2RU
Bend Radius with Drawer Cable Management Features: 1.5"
MPO Insertion Loss (1310 and 1550 nm): 0.5 dB maximum; 0.2 dB typical
MPO Return Loss (1310 and 1550 nm): -65 dB minimum
LC Insertion Loss (1310 and 1550 nm): 0.3 dB maximum; 0.1 dB typical
LC Return Loss (1310 and 1550 nm): -55 dB minimum
Specifications
Sliding Adapter Pack with LC Adapters (Enables Single-Circuit Access)
Fiber Management Tray
8-Fiber MPO
to LC Cable Assembly
MPO Transceiver Port
To Network
From
Network
LC Patch Cord
LC Patch Cord
Tx Rx Tx Rx Tx Rx
Tx Rx
Tx Rx
Transmitter
Receiver
Add/Drop Module
FMT 2 RU Empty Panel
305 mm (12")
483/584 mm (19/23")
89 mm (3.5")
Trang 3RU
2 RU Termination Panel with MPO Connectors
64-position panel loaded with MPO to LC/UPC assemblies
(8-fiber female APC MPO to 64-LC terminations)
FMT-GM7B808F0-A64P
80-position panel loaded with MPO to LC/UPC assemblies
(8-fiber female APC MPO to 80-LC terminations)
FMT-GM7B808F0-A80P
2 RU Termination Panel with Adapters-Only
Cable Assembly
O r d e r i n g I n f o r m a t i o n
2 RU FMT with MPO Connectors
Trang 4Spec
Website: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our website.
ADC Telecommunications, Inc., P.O Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice At any time, you may verify product specifications by contacting our headquarters office in Minneapolis ADC Telecommunications, Inc