Turn paper over.. Hold all layers firmly in position and fold corner A down as shown, about 1/5th of the distance between line BD and corner C.. Crease firmly through all layers and unfo
Trang 1Yuanbao (Ver 1.2) c Ronald Koh - 2000
2.
4.
3.
1.
Turn paper over
Hold all layers firmly in position and
fold corner A down as shown, about
1/5th of the distance between line BD
and corner C
5.
Crease firmly through all
layers and unfold
6.
1/5 1/5 1/5 1/5 1/5
A
B
C
D
8.
Unfold to position at start of Step 4,
9.
then turn paper over
10.
Bring each of the four corners to a verticle position, along the crease lines made in Steps 6 & 7 Now push the each
side to the middle to bring the circled point
in the centre towards you
11.
12
13
Fold one layer all the way down, drawing the corners
in at the same time to form
a neat triangle on each side,
like this
14
1/5 1/5 1/5 1/5 1/5
7
15.
Open out the over-lapping layer on each side as you fold up.
Fold the triangular piece into the pocket
immediately behind, then repeat from
Step 12 at the back
Open out to form a hollowed square at the bottom
16
17.
Push the upright flaps outwards
Finally, adjust the shape of the yuanbao until it looks like this