1. Trang chủ
  2. » Kỹ Thuật - Công Nghệ

Shop manual máy đào HuynDai R170W-9 (Phần 5) - P5.4

1 365 3
Tài liệu được quét OCR, nội dung có thể không chính xác
Tài liệu đã được kiểm tra trùng lặp

Đang tải... (xem toàn văn)

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Tiêu đề Shop Manual Máy Đào HuynDai R170W-9 (Phần 5) - P5.4
Thể loại Sổ tay
Định dạng
Số trang 1
Dung lượng 83,21 KB

Các công cụ chuyển đổi và chỉnh sửa cho tài liệu này

Nội dung

Shop manual máy đào HuynDai R170W-9 (Phần 5) Phần hệ thống cơ điện tử

Trang 1

GROUP 4 POWER BOOST SYSTEM

Main control valve

Dozer

Bucket

Option A &

Arm

Option B

Arm 2

Boom 1

Travel Option C

pressure

Engine solenoid valve Power max

Pilot pump

Main pump

Power max

LH control lever

Power max button

Drive Pressure signal

Accel dial signal CN-16A

CN-16B Emergency

=

Power max

pilot lamp

* When the power boost switch on the left control lever knob is pushed ON, the power mode is set P mode and maximum digging power is increased by 10 %

* When the power boost function is activated, the power boost solenoid valve pilot pressure raises the set pressure of the main relief valve to increase the digging power

- Power mode : P

wo - Accel dial power : 9 Activated Power boost switch : ON - Power boost solenoid : ON

Accel dial : over 8

- Power boost pilot Imap : ON

- Operating time : max 8 seconds

- Pre-set power mode Canceled Power boost switch : OFF - Power boost solenoid : OFF

- Power boost pilot lamp : OFF

* When the auto power boost is set to Enable and power mode is set to P mode on the cluster, the digging power is automatically increased as working conditions by the MCU It is operated max 8 seconds

Ngày đăng: 29/10/2012, 15:07

TỪ KHÓA LIÊN QUAN

🧩 Sản phẩm bạn có thể quan tâm