Shop Manual & ETM BCM KIA Cerato 2010 - Seat Electrical

Tài liệu Shop Manual & ETM BCM KIA Cerato 2010

2010 > G 1.6 DOHC > Body Electrical System

Component Location

1 Seat warmer

2 Seat warmer switch (LH)

3 Seat warmer switch (RH)

2010 > G 1.6 DOHC > Body Electrical System

Inspection

Front Seat Warmer Switch

1 Disconnect the negative (-) battery terminal

2 Remove the floor console (A) (Refer to Body group - Console)

Language

Language

3 Disconnect the seat warmer switch connector(A).

4 Check that continuity exists between the terminals(A)

2010 > G 1.6 DOHC > Body Electrical System

Inspection

1 Check for continuity and measure the resistance between No.1 and NO.3 terminals

Standard value :

Leather seat :2.40Ω ± 10% / setΩ ± 10Ω ± 10% / set% / set

Fabric seat : 3.24Ω ± 10Ω ± 10% / set% / set

2 Operate the seat warmer after connecting the connector, and then check the seat warmer by measuring the temperature of seat surface

3 Check for temperature of seat surface after disconnecting the connector

Standard value :

ON : 34 ± 5°C (93.2 ± °9F)

OFF : 43 ± 4°C (10Ω ± 10% / set9.4 ± 7.2°F)

Language