1. Trang chủ
  2. » Kỹ Thuật - Công Nghệ

Hệ thống thoát nước với công nghệ tự động hóa

3 78 0

Đang tải... (xem toàn văn)

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Định dạng
Số trang 3
Dung lượng 10,58 MB
File đính kèm www-at001_-en-p.rar (10 MB)

Các công cụ chuyển đổi và chỉnh sửa cho tài liệu này

Nội dung

Irrigation SystemsAgricultural Maximum Flexibility: allows distribution of the parcels in a larger number of plots and turns, which can be easily matched with soil and crops characteris

Trang 1

Irrigation Systems

Agricultural

Maximum Flexibility: allows distribution of the parcels in a

larger number of plots and turns, which can be easily

matched with soil and crops characteristics

Increase Productivity: will achieve maximum uniformity of

water and fertilizer distribution, which results in better and

more equal yields

Savings in operation: reduce the water and other supplies

consumption It is also possible to reduce the travel of the

tractors, making the grouping of irrigation turns in response

to the geography of the land

Time Saving and avoid manual work: permitto program the

irrigation frequency and characteristics and then be executed

by the system

Scalable Solutions: permit to work with different sizes of

irrigation systems in a modular way, allowing reuse code and

finding the right equipment for your need

Additionally it is possible to monitor the conditions of each

system component and to maintain the normal operation and service

The components of an automated irrigation system are commonly:

Automatic Irrigation Systems appears from the need to

optimize the use of water and other resources on agricultural

crops

Using automatic devices ensures that plantations receive the

necessary amounts of water and nutrients at the right time

and according to climatic and geographical conditions

There are a number of alternatives for Rockwell Automation

to control these irrigation systems From simple architectures based on Micro800 or MicroLogix until CompactLogix,based ones, depending on the complexity of the system design (signal number, irrigation turns, type of pump start)

The Logix Control Platform from Rockwell is the basis for developing a control, display, information and communica-tion robust system The design and delivery process is more efficient and lower cost Unlike conventional control architec-tures, offering fully integrated solutions, using a single scalable control platform and a single development environ-ment, you have different options for communication, and allow optimal reusing engineering designs and coding

Division into lots of an agricultural field

Filtering System

Fertilization System

Drip Hoses and Accessories

Field Valves and Accessories

Acidification System

Pipes

Pump System

Advantages

Solution Overview

Trang 2

Irrigation Systems

Agricultural

Modular Programming and Reusable

For this specific application we offer available

pre-configured modules for management of:

With modular programming we refer to a number of conventions

and best practices on industry standards, followed in developing

code that will allow us to make changes to the irrigation control

system functionality without rewriting the code

Among these we have the choice of tags, implementation of

state models, predefined HMI screens, etc

Pressure Sensors

Pressures: performs reception and analog signal processing

(scaling, alarma levels, etc.) It is used in all the pressure

measurements, either for irrigation, pumping and condition

monitoring

Pressure Control: Performs PID

pressure control loops in the

system, allowing easy change

of parameters, benchmarks and

alarm mode

Turns: allows automatic handling of the irrigation It is able to

control the start and stop of the pumping equipment according

to the schedule entered by the operator and monitoring

conditions

Rockwell Automation has used 836E sensors for this technical alternative, whose main characteristics are:

The pressure measurement is an important factor for the normal operation of these systems The pressure control ensures the proper functioning of the pumping equipment (including auxiliary systems, cleaning and lubrication), as the precise distribution of water and fertilizer dosage

Operating pressures ranges: from -15 to 6000 psi (gauge) Outputs: Independently programmable dual PNP NO/NC

outputs or 4 20 mA analog output with single PNP NO/NC

Housing: Rugged, corrosion-resistant 316LStainless steel

housing with IP66 rating

enclosure

Optional Display: Four-digit 14-segment digital display SensingElement: 316L Stainless steel

Selectable units of measurement:

kPa, psi, bar, or %

836E Sensors

Trang 3

Irrigation Systems

Agricultural

Publication WWW-AT-001-A-EN-P – May 2013 Copyright ©2013 Rockwell Automation, Inc All Rights Reserved

Based on Micro800

Flex I/O

PowerFlex 40

Pump Motor

Based on MicroLogix

Point I/O Flex I/O

PowerFlex 70

Pump Motor

Basedon Compact Logix

PanelViewPlus 6

PowerFlex755

Pump Motor

Automated Irrigation Systems

Ngày đăng: 24/04/2019, 21:55

🧩 Sản phẩm bạn có thể quan tâm