• Flame arresting pressure regulated safety sealing valves for safety, operating pressure management and protection against atmospheric contamination excess oxygen being absorbed by neg
Trang 1Features & Benefits
• Completely sealed valve regulated construction
• Flame arresting pressure regulated safety sealing valves for safety, operating pressure management and
protection against atmospheric contamination (excess oxygen being absorbed by negative plates)
• Computer-aided 99.994% pure heavy-duty lead calcium grid designs
• Tank formed plates guarantees evenly formed and capacity matched plates
• Anchored plate groups to guard against vibration
• Double insulating Micro porous glass fiber separators
• Measured and Immobilized electrolyte
• Vacuum filling and weighing processes
• Advanced technology for efficient gas recombination of up to 99.9% and freedom from electrolyte maintenance
•
•
• High impact reinforced strength copolymer polypropylene cases and flat top designed covers that are
rugged and vibration resistant
• Thermally welded case to cover bonds that eliminate leakage
• Copper and stainless steel alloy terminals and hardware
• Multi-terminal options
• Terminal protectors
• Removable carry handles
• Industry leading size and performance options
• Classified as “NON-SPILLABLE BATTERY” Not restricted for Air (IATA/ICAO) Provision 67, Surface
(DOT-CFR-HMR49)or Water (Classified as non-hazardous per IMDG amendment 27) transportation
• Can be used in multiple orientations (upside down is not recommended).
• Compatible with sensitive electronic equipment
• Quality Assurance processes with ISO (4400/992579), QS and TUV Certification EMC tested, CE, ETTS
Germany (G4M19906-9202-E-16) UL recognized and approved components (MH25860)
• Tellcordia and Bellcore compliant
Low self discharge rates (Approx 1%-3% monthly at 20 °C–25°C / 68°F–77°F).
Wide range of operating temperatures (-40 °C to 60°C).
page 1 of 4
Complies with DOT provisions listed in 49CRF173.159 (d)
Special provision A67
MH25860 ISO 14001
DIN ISO 9001/QS9000
Vision EV Series Dry Cell Batteries provide superior performance, capacities and reliability Using state of art dry cell technology the EV series is designed for environmentally sensitive areas that
require enhanced cycle life capabilities in commercial, industrial, residential, and private
applications The maintenance-free (VRLA) construction and advanced design features makes
the EV Series the definitive choice for a wide variety of markets; Solar and Renewable Energy
Storage; Electric Vehicle and Golf cart; Industrial equipment, Floor Machines, Fork lifts, Aerial lifts, and Robotics; Marine, RV, and no-idle solutions; Mobility and Medical Equipment; Telecom,
Broadband and Cable TV; UPS systems
Vision EV Series
www.vision-batt.com
Trang 2Mechanical Characteristics
Dimensions in Inches (mm) Industry
Standard (optional) Terminals
L in(mm)
W in(mm)
H in(mm)
TH in(mm)
Approx Weight in Lbs (Kgs)
DIN
www.vision-batt.com
Trang 3Electrical Specifications
CHARGE METHODS: Constant voltage charging at 20℃(68℉)
Contact Discover Engineering for OEM specific charging algorithms!
Operating temperature range
3600A
Constant current discharge ratings-amperes at 20℃(68℉)
Constant power discharge ratings-watts per cell at 20℃(68℉)
Short circuit current (20℃)
www.vision-batt.com
R/C
@25A 32°F/ 0°C 0°F/ -18°C
* - Performance averages after 15 cycles
End Point
End Point
Trang 4Charge / Discharge Tables & Graphs
Relative state of charge (%)
13.5
13
12.5
12
11.5
11
0 10 20 30 40 50 60 70 80 90 100
Charge characteristic curve
Charging time (hours)
Charged V
(%)
(XCA)
(V)
15.0
14.0
13.0
12.0
11.0
0.25
0.20
0.15
0.10
0.05
0
0 2 4 6 8 10 12 14 16 18 2 0
Constant voltage charge characteristic
o
(0.25CA,20 C)
CHARGED VOLUME 140
120
100
80
60
40
20
0
CHARGE VOLTAGE
CHARGING CURRENT
Temperature effects on capacity
120
100
80
60
40
20
0 -20 -10 0 10 20 30 40 50
o
Temperature( C)
0.1C 0.2C
1.0C 2.0C
Self-discharge characteristic
110
100
90
80
70
60
50
40
0 2 4 6 8 10 12 14 1 6 18 20
Storage time: months
o
20 C
Relationship between charging voltage and temperature
-10 0 10 20 30 40 50 60
o
Ambient temperature( C)
15.6
15.0
14.4
13.8
13.2
(V/8V) (V/6V) (V/4V)
10.4
10.0
9.6
9.2
8.8
7.8
7.5
7.2
6.9
6.6
5.2
5.0
4.8
4.6
4.4
2.6
2.5
2.4
2.3
2.2
STAND
BY USE
CYCL
E US E
Cycle service life in relation to depth of discharge
Number of cycles(cycles)
80% D.O.D.
120
100
80
60
40
20
0
400 800 1200 1600 2000 2400 2800
20%D.O.D.
50%D.O.D.
THE INTERNATIONAL CERTIFICATION NETWORK
ISO9001:2000
THE INTERNATIONAL CERTIFICATION NETWORK
www.vision-batt.com
Shenzhen Center Power Tech Co., Ltd.
Center Power Industrial Park, Tongfu Industrial District Dapeng Town, 518120 Shenzhen, China
Tel: (+86-755) 8431 8088 Fax: (+86-755) 8431 8038 E-mail: sales@vision-batt.com
Copy Right Shenzhen Center Power Technology Co., Ltd (Edition 2011-9)