6FML100-X 12V 100Ah10hrThe rechargeable batteries are lead-lead dioxide systems.. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.. Should
Trang 16FML100-X 12V 100Ah(10hr)
The rechargeable batteries are lead-lead dioxide systems The dilute sulfuric acid
electrolyte is absorbed by separators and plates and thus immobilized Should the
battery be accidentally overcharged producing hydrogen and oxygen, special
one-way valves allow the gases to escape thus avoiding excessive pressure build-up
Otherwise, the battery is completely sealed and is, therefore, maintenance-free,
leak proof and usable in any position
Battery Construction
Component Positive plate Negative plate Container Cover Safety valve Terminal Separator Electrolyte Raw material Lead dioxide Lead ABS ABS Rubber Copper Fiberglass Sulfuric acid
General Features
for efficient gas recombination of up to
99% and freedom from electrolyte
maintenance or water adding
´ Not restricted for air transport-complies
with IATA/ICAO Special Provision A67
´
´ Long service life, float or cyclic
applications
´ Low self discharge
Dimensions and Weight
6.73
Performance Characteristics
Nominal Capacity 77oF(25oC)
Internal Resistance
Self-Discharge 2% of capacity declined per month at 20oC(average) Operating Temperature Range
Charge Methods: Constant Voltage Charge 77oF(25oC) Cycle use
Standby use
Discharge Constant Current (Amperes at 77 o F25 o C)
Discharge Constant Power (Watts at 77 o F25 o C)
page1 of 2
www.vision-batt.com
(Note)The above characteristics data are average values obtained within three charge/discharge cycles not the mimimum values
Computer designed lead, Pure lead
grid for high power density
8.46
2.23-2.27VPC
End Voltage/
End Voltage/
Trang 2Life characteristics of Standby use
120
100
80
60
40
20
0
4 6 8
Life(year)
Charging time (hours)
(%) (XCA) (V)
15.0 14.0 13.0 12.0 11.0
0.25 0.20 0.15 0.10 0.05 0 0
2 4
6 8
10
12
14
16
18
20
140 120 100 80 60 40 20 0
Constant voltage charging
o
characteristic (0.25CA,25 C)
íỉòẻÙÛĩ ấẹễậểÛ CHARGE VOLTAGE
CHARGING CURRENT
Relationship between
charging voltage and temperature
o
Ambient temperature( C)
2.6
2.5
2.4
2.3
2.2
5.2
5.0
4.8
4.6
4.4
7.8
7.5
7.2
6.9
6.6
10.4
10.0
9.6
9.2
8.8
15.6
15.0
14.4
13.8
13.2
THE INTERNATIONAL C ERTIFICATION N ETWORK
ISO9001:2000
THE INTERNATIONAL C ERTIFICATION N ETWORK
www.vision-batt.com
Shenzhen Center Power Tech Co., Ltd.
Ce nter Powe r Ind ustrial Par k, Tong fu In dustrial District Dap eng Tow n, 51 812 0 She nzhe n, C hina
Tel:
( +86-7 55) 84 31 80 88
Fax:
(+86 -75 5) 843 1 8 03 8
E-mail: sale s@vision -ba tt.com
Co py R ig ht Sh enzh en Ce nter Powe r Tech no log y C o., Ltd
(Edition 2 011 -8)
Page 2 of 2
O
Discharge characteristic (25 C)
13.0
12.0
11.0
10.0
9.0
8.0
0
0
242 114 68.2
10A 27.2 17.4A
Self-discharge characteristic
110 100 90 80 70 60 50 40
Storage time: months
íĐẵ´ằ -ằđêãẵằ ´ãºằ ã² đằ´¿ơã±² ơ±
ẳằ°ơá ±º ẳã-ẵá¿đạằ
A
% Depth of 30 discharge