Hướng dẫn khai báo mặt cắt liên hợp bất kỳ ( môn cầu hầm)

Sinh viên chuyên ngành Đường hầmMetro sẽ được trang bị các kiến thức cơ bản và chuyên ngành về thiết kế và thi công các công trình đường hầm metro. Sinh viên có thể lựa chọn làm đồ án tốt nghiệp về đường hầm hoặc công trình cầu.

CACH KHAI BAO

JOBE Os| Reo Ce ud NE.==.= CUPS ys Ste

File Edit View Insert Format Tools Draw Dimension Modify Parametric Window Help —_ Express

Avo Save Drawing As

Savein: |) MC ben hop bat ky

{ 4) W II N Layout! /

Va Civil 2011 - [Untitled] - [Model View]

Ma Fle Edit View Model Load Analysis Results Design Mode Query Took Window Help

+) TX Response Spectrum Analysis

+) Po Time History Analysis

+) § Moving Load Analysis

+) TET Settlement Analysis Data

+) age Composite Section Analysis Data

+) Rf Heat of Hydration Analysis Data

+) [8 Non-Linear Analysis Data

+) fF Construction Stage Analysis Data

Name Date modified

No items match your search

tx Civil 2011 - [E:\Specialized software\Midas\File\Midas - T.Hung\MC lien hop bat ky\MC lien hop bat ky] - [Model View] 5= ||-(eÐ

Hạ Fe Edit View Model Load Analysis Results Design Mode

+) TX Response Spectrum Analysis

+) fo Time History Analysis

+) fy Moving Load Analysis

+| TET Settlement Analysis Data

+) sg Composite Section Analysis Data

+) if Heat of Hydration Analysis Data

+) if Non-Linear Analysis Data

+\- fe Construction Stage Analysis Data

ter Sectional Property Calculator

[s General Section Designer

— Tendon Profle Generator

3) Dynamic Report Generator ¢

Dynamic Report Image F

Text Editor Ctri+F5

Graphic Editor Ctrl+F6 eff

»

Tree Menu | | | Ì Command Message A Analysis Message / | 4| II Ha

Sectional Property Calculator None! U: 0, 0, 0 G: 0, 0, 0 lN v|[m vị 4c] Di [nom vị ?ÌI:~/| : =

1) File Edit Model Property View Tools Help [- [#Ï x|

Angle Step | 10 [Deg]

~ DXF File Name

+ ¢ 8 ef Er

| Lookin: ||) MC ben hop bat ky

Files of type: | AutoCAD DXF Fis (* dx)

GF Stee! Design Group

ae %@ 4|4X|&#£ Ï⁄Ze èdo£onwrs|oX|#$ 6 @|+3I<š #=X|Z+|l&#£

EF) Domain Material @

=F Composite Section MIDAS/SPC YV 1.5.1 - Sectional Property Calculator

OF Generate Composite Lá Imported AutoCAD DXF model data

SY Add to Composite fA |- Model: Curve [4], Point [58]

HK Delete Composite —

Model 4] 4] > TDN Process Message /

mae se SOM XIEA||7/ 0 TOCONNHS/OR|FOAN|t5rTFSXK|7 SER

B) File Edit View Tools Help |- |) x!

- Model: Curve [4], Point [58]

The widths of 4 curves are changed to 6.626

[ý MIDAS/SP( U 1.5.1 - Sectional Property Calculator

J |Imported AutoCAD DXF model data

f |- Model: Curve [4], Point [58]

_ |The widths of 4 curves are changed to 6.626

4] 4] > Tpif\ Process Message /

\UCS: GCS:

1) File Edit Model Property View Tools Help (- |e] x]

MIDAS/SPC UV 1.5.1 - Sectional Property Calculator

Lá Imported AutoCAD DXF model data

f |- Model: Curve [4], Point [58]

_ |The widths of 4 curves are changed to 6.626

C Left <-> Right Arrange

taj Change Domain State

M Wadth | &Z) Assign Domain Material

Lý MIDAS/SPC YV 1.5.1 - Sectional Property Calculator

¬ |\Imported AutoCAD DXF model data

f |- Model: Curve [4], Point [58]

|The widths of 4 curves are changed to 6.6286

⁄

lee |S OA/YXIGA||/ 0 ÀAano£onawroloX|‡ 6 @|+3I<š x=X|Z+|l 6£

Generate a new composite section UCS; GCS:

" NA | — ean View Tools Help

- Model: Curve [4], Point [58]

The widths of 4 curves are changed to 6.626

taj Change Domain State

&&) Assign Domain Material

Kel Export [i Pick

Query

Steel Design Group

Imported AutoCAD DXF model data

- Model: Curve [4], Point [58]

The widths of 4 curves are changed to 6.626

las/sPe Y 1.5.1 - Sectional Property Calculator

|New composite section [MC lien hop] with 2 part(s) is generated

J IFL Vid = [PUL OPC VLO2 - SPC

TÌBle Edit Model Property View Tools Help

- Model: Curve [4], Point [58]

The widths of 4 curves are changed to 6.6286

|New composite section [MC lien hop] with 2 part(s) is generated

H) File Edit Model Property View Tools Help

|Add Part to Comp Section >| (— >

ci MIDAS/SPC V 1.5.1 - Sectional Property Calculator

“J Imported AutoCAD DXF model data

# |- Model: Curve [4], Point [58]

|The widths of 4 curves are changed to 6.628

New composite section [MC lien hop] with 2 part(s) is generated

/ New line part [Thep] is added to composite section [MC lien hop] (Part: 1)

UCS; GCS:

1) file Edit Model (Property) Pe—rdols Help BOE

,n#W?= cớ) Calculate Section Property B BE | | Í$ ay r ——n

TẾ Display Section Property [Add Part to Comp Sé (8) List Section Property

- Model: Curve [4], Point [58]

The widths of 4 curves are changed to 6.626

New composite section [MC lien hop] with 2 part(s) is generated

/ New line part [Thep] is added to composite section [MC lien hop] (Part: 1)

: New plane part [Betong] is added to composite section [MC lien hop] (Part: 2)

Select only one composite

by selecting any part of it!

Undo: Calculate composite sectional properties

Redo: Calculate composite sectional properties

Undo: Calculate composite sectional properties

New line part [Thep] is added to composite section [MC lien hop] (Part: 1)

New plane part [Betong] is added to composite section [MC lien hop] (Part: 2)

[Notice] If two or more parts are apart other(s), SAx, SAy and J may be calculated incorrectly

The properties of composite section are calculated

ke composite section [MC lien hop] with 2 part(s) is generated

#Ì File Edit Model (Property) Pw—rdols Help [- [a] x)

ñ eh | 9 1 Gaeulate Section Property Ag Jjehùg[ — +3 PRSPP ‘Ie u |

TẾ Display Section Property Cakulate Composite | (8) List Section Property

Gel Export Section

zp Calculate Composite Property

|New plane part [Betong] is added to composite section [MC lien hop] (Part: 2) ˆ

[Notice] If two or more parts are apart other(s), SAx, SAy and J may be calculated incorrectly

The properties of composite section are calculated

Undo: Calculate composite sectional properties |

ke: Calculate composite sectional properties Ì

Undo: 0alculate conposite sectional properties

/ [Notice] If two or more parts are apart other(s), SAx, SAy and J may be calculated incorrectly

— : The properties of composite section are calculated x

— HHDDVL enage /

%@ 4|4X|&#£ Ï⁄Ze èdo£onwrs|oX|#$ 6 @|+3I<š #=X|Z+|l&#£

Composite property table UCS: GCS:

Select only one composite

by selecting any part of it!

0.000000 0.548191

0.504868 0.504868 1.209841

1

New plane part [Betong] is added to composite section [MC lien hop] (Part: 2)

[Notice] If two or more parts are apart other(s), SAx, SAy and J may be calculated incorrectly

The properties of composite section are calculated

Undo: Calculate composite sectional properties

|}Redo: Calculate composite sectional properties Undo: Calculate composite sectional properties [Notice] If two or more parts are apart other(s), SAx, SAy and J may be calculated incorrectly

The properties of composite section are calculated

v2 #6 dh MXR |/o Àèdo£onw#=loX SOM FIR TFSXK|7S|EA|

Apply | Close | taj Change Domain State

7 Assign Domain Material

fel Export [i Pick

{New plane part [Betong] is added to composite section [MC lien hop] (Part: 2) ˆ

[ý [Notice] If two or more parts are apart other(s), SAx, SAy and J may be calculated incorrectly

1 |The properties of composite section are calculated

#\ |Undo: Calculate composite sectional properties ñ

L hen: Calculate composite sectional properties

Undo: Calculate composite sectional properties :

[Notice] If two or more parts are apart other(s), SAx, SAy and J may be calculated incorrectly

H———D : The properties of composite section are calculated x

Export composite section UCS: GCS:

|Export Composite Section v|

Select only one composite

by selecting any part of it!

Savein:| |) MC ken hop bat ky >| & © cf Ev

Name | Date modified

File name: eon K2)

Save as type: |MIDAS Section Files (sec) |

|New plane part [Betong] is added to composite section [MC lien hop] (Part: 2)

[Notice] If two or more parts are apart other(s), SAx, SAy and J may be calculated incorrectly

The properties of composite section are calculated

hen: Calculate composite sectional properties

Redo: Calculate composite sectional properties

Undo: Calculate composite sectional properties

[Notice] If two or more parts are apart other(s), SAx, SAy and J may be calculated incorrectly

The properties of composite section are calculated

|Export Composite Section v|

Select only one composite

by selecting any part of it!

|New plane part [Betong] is added to composite section [MC lien hop] (Part: 2)

[Notice] If two or more parts are apart other(s), SAx, SAy and J may be calculated incorrectly

The properties of composite section are calculated

Undo: Calculate composite sectional properties

Redo: Calculate composite sectional properties

Undo: Calculate composite sectional properties

[Notice] If two or more parts are apart other(s), SAx, SAy and J may be calculated incorrectly

The properties of composite section are calculated

[ADP DIN Process Message /

|Export Composite Section vị || 4

Select only one composite Q

by selecting any part of it! â

mi [Notice] If two or more parts are apart other(s), SAx, SAy and J may be calculated incorrectly ˆ

Lý The properties of composite section are calculated

“J |Undo: Calculate composite sectional properties

4À |Redo: Calculate composite sectional properties 1

Undo: Calculate composite sectional properties [Notice] If two or more parts are apart other(s), SAx, SAy and J may be calculated incorrectly = / The properties of composite section are calculated

ee : 1 curve is reversed x

ee sre |P OA XIBR |7 e SDOGCONNEAS/OR+ OM +9 FE FSX\/ SEAR |

|Export Composite Section | es

Select only one composite Q

by selecting any part of it!

ta ‘Hr Save As

| MC lien hop.sec [nl “= Name 5 _ Date modified

} No items match your search

ia [Notice] If two or more parts are apart other(s), SAx, SAy and J may be calculated incorrectly ˆ

Lý The properties of composite section are calculated

4 |Undo: Calculate composite sectional properties

#\ |Redo: Calculate composite sectional properties ñ

Undo: Calculate composite sectional properties [Notice] If two or more parts are apart other(s), SAx, SAy and J may be calculated incorrectly = / The properties of composite section are calculated

% Civil 2011 - [E:\Specialized software\Midas\File\Midas - T.Hung\MC lien ho V\MC lien hop bat ky Í Materal Data

ta fie Edit View Model Load Analysis Reuls Design Md Took Window

Type of Material

(* Isotropic User Defined Modulus of Elasticity : Poisson's Ratio Thermal Coefficient : Weight Density

Concrete

Modulus of Elasticity : Poisson's Ratio Thermal Coefficient:

Weight Density [

Plasticity Data Plastic Material Name NONE v

Message Window Heat Conduction kl/m:hr-[C] X al

Damping Ratio - 2

>> | Apply | %

Tree Menu | | | Ì Command Message ( Analysis Message j bị

For Help, press Fi None! U: 0, 0,0 G: 0, 0,0 JM vin vị 3{1j P|[[Ïhoav| [2] i ef 2 =

5 Civil 2011 - [E:\Specialized software\Midas\File\Midas - T.Hung\MC lien hop bat ky\MC lien hop bat ky *] - [Model View]

i] Hè Edit View Model Load Analysis Results Design Mode Query Ti

D Zz g a, ; Sr 8 ny % oR b ® p SectionID |Í Name MC lien hop

Properties x! @

Section Propertles

ID | Name | Type | Shape | Asz | 0.00000e+000 | m? 8 Open Xu) ằ

Tree Menu l4 | |) Ñ Command Message A Analysis Message / |‹ | | «

For Help, press F1 None! U: 0, 0, 0 G:0, 0,0 KN vim v| #| 1| ? |Ïm x 1/{ 2 =

For Help, press F1

| | | \\ Command Message A Analysis Message /

Nonel U: 0, 0, 0 G: 0, 0, 0 |+_Í

5 Civil 2011 - [E:\Specialized software\Midas\File\Midas - T.Hung\MC lien hop bat ky\MC lien hop bat ky *] - [Model View] Ì ø l| %

j Fle Edit View Model Load Analysis Results Design Mode Query 1) Section Data x - 8X Hele | a DB/User | Value | SRC | Combined | PSC | Tapered Composite

1D | Name | Type | #ae | _— #6 | Asz — | 0000/Ue+0U|nf cố a

Modify Ixx |_ 0.00000e+000 | m^4 a

= Š |Perl | 000000e+000|m Q

| ky\MC lien hop.sec II ZI 0.0000 un đ

Before Composite Section Part 1 v “Gj

Offset: Center-Center &

Change offset | v, r Shear Deformation 3

Wa Civil 2011 - [E\Specialized software\Midas\File\Midas - T.Hung\MC lien hop bat ky\MC lien hop bat ky *] - [Model View] s||seÐ [|

Mya fle Edit View Model Load Analysis Results Design Mode Query Took Window Help -_ B>

Fretue 2 Node {1

EY ES bese OIF Pare pe aM ho

iv Merge Duplicate Nodes ce

iV Intersect Frame Elements i

»›

“Tree Menu | | | |\ Command Message f Analysis Message / Kn Ha

For Help, press F1 None! U: 0, 0, 0 G: 0, 0, 0 KN v||m vị | | ||non ¥ | | Ei 2

Ma fle Edit View Model Load Analysis Results e Query Toos Window Help

Wa Civil 2011 - [E:\Specialized software\Midas\File\Midas - C1 lien hop bat ky\MC lien hop bat ky *] - [Model View]

“Tree Menu | | | | |\ Command Message f Analysis Message /

For Help, press F1 None! U: 0, 0, 0 G: 0, 0, 0 Le

[te] Pl Tron] [2] |

i ~|)~ i] a <+

Wa Civil 2011 - [E\Specialized software\Midas\File\Midas - T.Hung\MC lien hop bat ky\MC lien hop bat ky *] - [Model View] :||:@

Mya fle Edit View Model Load Analysis Results Design Mode Query Took Window Help TP

Freque Element |

Tree Menu 2X 4 / %% Model View : b) Xim

»›

“Tree Menu | | | |\ Command Message f Analysis Message / Kn Hai

For Help, press Fi None! U: 0, 0, 0 G: 0, 0, 0 KN vim vị 145] || x| ?|f[o=1/| : <