Fabric cutting machine máy cắt thiết bị sửa chửa

INDUSTRIAL SEWING EQUIPMENT AND MAINTENANCEGROUP 7 Tran Kim Ngoc Nguyen Thi Huong Nguyen Anh Thu Fabric cutting machine Teacher: MA... Introduce machineThe features of machine MANUAL And

INDUSTRIAL SEWING EQUIPMENT AND MAINTENANCE

GROUP 7

Tran Kim Ngoc Nguyen Thi Huong Nguyen Anh Thu

Fabric cutting machine

Teacher: MA Nguyen Ngoc Chau

1

Introduce machine

The features of machine

MANUAL And Calibrate

Knives and support equipments

Band knife machine

End cutter machine

Straight knife machine

Fabric cutting machine

3

Anysew AS-900A

Band knife machine

1 Introduce machine

4

TSM EC-900T Band knife machine

1 Introduce machine

5

Sulee ST-360

End cutter machine 

1 Introduce machine

6

MTD-5594 End cutter machine

1 Introduce machine

7

1 Introduce machine

KS-EU

1 Introduce machine

Japan KM-01-MAG

1 Introduce machine

KM KS-AUV

Straight knife machine

10

KM KS-AUV

2 The features of machine

11

Model name KM KS-AUV

First, a few drops of oil into the machine.

3 MANUAL and Calibrate

14

A MANUAL

Pour oil into the oil canister.

15

A MANUAL

Hold the machine with your right hand.

16

A MANUAL

Using the index finger

squeeze presser foot

lever.

17

A MANUAL

Then, pulled presser foot up and down.

18

A MANUAL

Next, we sharpen

knives

19

A MANUAL

Finally, put machine into fabric to perform cutting it.

20

A MANUAL

Instructions on changing knives.

First, put machine down.

21

B Calibrate

Then, loosen the screw.

22

B Calibrate

Next, loosen the screw too.

23

B Calibrate

Finally, changing knives.

24

B Calibrate

B Calibrate

Grinding wire is taken out

B Calibrate

Then, put another grinding wire

4 knives and support equipments

Straight knife blades.

Straight knife blades.

Serrated knife blades.

Serrated knife blades.

28

4 knives and support equipments

Cut-resistant gloves Cloth clamp stand.

29

4 knives and support equipments

(A)Shaft of motors(AB) Crank

(BC) Connecting rod(C) Slider

 Structure

5 operating principle

32

5 operating principle

 Rotary motion from the motor (shaft A) through crank AB, connecting rod BC make slider C (mounted cutter) move up and down time by 2 times as the journey

of crank AB

33

5 operating principle

 Machine move on the cutting

table thanks to buffer table

format, pressed with cutting table

and shift the trajectory cut by

hand operator

34

5 operating principle

 Machine equipped with part cutter

grind make it sharp during cutting

abraded

35

6 application of machine to products

36