CV chính là cái nhìn đầu tiên của nhà tuyển dụng đối với ứng viên, là đại diện bộ mặt của ứng viên với nhà tuyển dụng. Với kinh nghiệm thi tuyển cũng như đang làm việc cho công ty nước ngoài, mình chia sẻ CV của bản thân mình để các bạn tìm việc có bước khởi đầu thành công. Công ty Nhật Bản có một văn hóa tuyển dụng rất chuyên nghiệp, với một số người có thể coi là cứng nhắc và bảo thủ. Một ví dụ điển hình mà rất rất nhiều người mắc phải đó là số thứ tự giấy tờ trong hồ sơ phải đúng với số thứ tự mà nhà tuyển dụng đã ghi trong thông tin tuyển dụng.
Trang 1THE SOCIALIST REPUBLIC OF VIETNAM Independence - Freedom - Happiness
******
LETTER OF APPLICATION
Dear: RORZE ROBOTECH Co., Ltd
My name is: NGUYEN SI HOA Birth year: 1989 Branch of knowledge: Mechanical Engineer (Welding Engineer)
Apply for: Information System Management Staff ( ISM 0213)
I have been following Rorze’s fanpage for a long time, so, I knew
recruitment information of the company I think, I will do the work of Information system management staff (ISM 0213)
Currently, I am QA/QC at FABRICATION workshop at GE Hai Phong factory in Nomuza industrial zone Before, I have almost 4 years of work experiences with key projects in Vietnam such as: Lai Chau Hydropower Project and Xuan Thanh Cement Phase 2 Plan I studied mechanical welding technology from Nam Dinh University of Technology Education, I graduated in 2012 For more details, I will describe in my CV
I enjoy the work and looking for new challenges I am willing to break the old experience to acquire new knowledge I like reading books, especially in the field of mechanical engineering and standards Besides, after hours of stressful work, I also enjoy the music, take pictures of nature and streets, learn about bonsai
I pledge that the all information is true, and I hope that in the future you will give me the opportunity to visit and interview at Rorze
Sincerely!
Hai Phong, February 26th, 2018
NGUYEN SI HOA
Trang 2CURRICULUM VITAE
Full name : NGUYEN SI HOA
Birthday : August 31st, 1989 Sex: Male Female
Address :
Current
address :.
Email :
Cellphone :
Year Month Work experiences and Educational background
2017 →
Current
ly
February
→
Currently
QA/QC consultant for Fabrication workshop at GE Renewable Energy Hai Phong
- Quality risk assessment for new projects: Machine Head (supports for the machine), Blade and Tip (support for Wind turbine blades), I-frame A (support for Wind turbine blades) according to the design drawings and standards attached
- Quality control during manufacturing process
- Root analysis of defects with QA/QC team (I am not the leader of the team)
- I have many concerns about quality and safety in the factory
- Besides, I learned about Panasonic's Iweld software, it is used to control the welding data
- I built myself a list of quality in the process of work by Excel Software
2016 →
2016
August →
Decembe
r
Leader for repair beam structures roof plan clinker storage
481 project - Xuan Thanh Cement Phase 2 Plan
- Contract building with LILAMA 693 DSE Co., Ltd
- Field survey and planning to buy materials and equipments
Trang 3- Check the 2D,3D drawings and write the construction plan according to the design drawings and progress from the owner
- Train workers before work
2013 →
2016 July → June
Welding Engineer/ Mechanical Engineer of LILAMA 10, worked at Lai Chau Hydropower Project (3x400MW) ( Nam Hang commune, Nam Nhun district, Lai Chau province)
- Writing and consulting welding procedures, welding methods for items in the project (The important and complex items are written by Alstom China expert)
- Recommended methods of welding test and analyze the root cause of the welding defects
- Responsible for fabricate: steel cladding of deep hole in the spillway
- Workload statistics done in a month of the welding team
- Suggest ideas, solutions:
+ I have an idea of anti-deformation when weld the supports plale behind to the basic plate
+ I propose and defend my opinion with the project management board on the matter of the item Spiral case: penetrant testing front and back of the welding seam
2008 →
2012
August →
Septemb
er
Student of Nam Dinh University of Technology Education (Phu Nghia Street, Loc Ha Ward, Nam Dinh City, Nam Dinh province)
Skills in using foreign languages
This is a test result on a personal computer, not an official test result at IIG Vietnam
Japanese I am JapaneseBeginner
Specialized skills
Office (Word, Excel,
Power Point), Gmail,
Outlook, Internet Above Average
Trang 4I-weld software Above Average
Censorship of
ISO, AWS, ASME,…
Hobby:
+ Read books
+ Take pictures of nature and streets
+ Music
+ Travel
Working time: Full time & Overtime Dependent family (excluding spouse): 1
Wife: Yes Spouse's obligation to support: No
Desired employee benefits:
Type of contract is stability
Training
Life Insurance
Healthcare Plan
Transportation
Travel Opportunities