ðể tăng hiệu quả hấp phụ trong xử lý môi trường, MCM-41 thường ñược biến tính bằng cách gắn thêm các kim loại khác như Al, Ti, Fe… Nghiên cứu này thực hiện việc tổng hợp vật liệu nền MCM
Trang 1Tóm tắt báo cáo NCKH sinh viên khóa K53TN - TT (QH.2008T)
Kỳ 2, năm học 2011-2012
1 Synthesis of methyl 2-hydroxy -2- (-hydro-4-methylpentyl) succinate
Nguyen Thanh Binh, K3- Advanced Chemistry,
Assoc Prof Dr of Science Luu Van Boi & Dr Mac Dinh Hung
The objective of this research is to synthesize the succinic acidỖs esters of
Cephalotaxine in order to proceed Homoharringtonine synthesis and its derivatives
Homoharringtonine is allowed by FDA to conduct clinical trials with the aim of
curing leukemia So this research plays an important role and has a practical
significance
In this work, we continue synthesizing esters including diethyl oxalate, methyl
butyrate which is starting materials for the next step process
Next reaction based on Claisen condensation between diethyl oxalate and methyl
butyrate to produce β-ketone-ester After that, Reformatsky reaction will be applied to
form the derivative 2- hydroxy-succinate
TỔNG HỢP METHYL 2- HYDROXY -2-(4 HYDRO-4-METHYLPENTYL)
SUCCINATE
Nguyễn Thanh Bình, K53 Hóa Tiên tiến, 2010- 2011
Khoa hóa học, trường đại học Khoa học tự nhiên
PGS TSKH Lưu Văn Bôi& TS Mạc đình Hùng
Mục tiêu của ựề tài là tổng hợp các ester succiniate của Cephalotaxine ựể ựiều chế
Homoharringtonine và các dẫn xuất của nó Homoharringtonine ựã ựược FDA cho
phép tiến hành thử lâm sàng với mục ựắch chữa bệnh bạch cầu , do ựó việc tổng hợp
nó là một yêu cầu quan trọng và có ý nghĩa thực tiễn cao
Trong công trình này, chúng tôi ựã tiến hành tổng hợp diethyl oxalate, methyl butyrate
là những chất ựầu cho việc tổng hợp ester nêu trên
Phản ứng tiếp theo dựa vào sự ngưng tụ Claisen giữa 2 ester diethyl oxalate và methyl
butyrate tạo ra β-xeton-ester Sau ựó dùng phản ứng Reformatsky cho phép tạo ra dẫn
xuất 2- hydroxy-succniate
2 Transesterification of snakehead fish oil with ethanol on solid acid catalyst to
evaluate essential fatty acids by GC-MS
Dang Tran Chien- K53TT
www.chemvnu.edu.vn
Trang 2Supervisor: Assoc Prof Ờ Dr Tran Thi Nhu Mai
From the early 20th century people have known necessary active elements for health
development from marine fats and plant oils especially essential fatty acids such as
Omega-3, Omega-6 Essential fatty acids - omega-3 are effective in the prevention and
treatment of high blood pressure, atherosclerotic disease, cancer And omega-6
can prevent heart disease
However, assessing directly unsaturated fatty acid components by liquid
chromatography will not radically separated fatty acids because they have similar
boiling points Therefore, evaluating indirectly unsaturated fatty acid by GC-MS after
transesterification is more effective and economical
In this research, we evaluate fatty acids components in Snakehead fish oil
Transesterification of Snakehead oil with ethanol on Zn,P/ γ -Al2O3 catalyst was
carried out Products were evaluated by GC-MS
Thực hiên phản ứng este chéo hóa mỡ cá quả với ethanol bằng xúc tác axit rắn
và xác ựinh thành phần axit béo bằng phương pháp sắc kắ khắ khối phổ
đặng Trần Chiến
Người hướng dẫn: PGS.TS Trần Thị Như Mai
Từ ựầu thế kỷ 20 thế giới ựã biết ựến các hoạt chất cần thiết cho sự phát triển và sức
khỏe của con người từ mỡ sinh vật biển và dầu thực vật, ựặc biệt là các axit béo không
thay thế Axit béo không thay thế omega-3 có tác dụng trong việc phòng ngừa và chữa
trị các bệnh huyết áp, bệnh xơ vữa ựộng mạch, ung thư Còn omega-6 có thể phòng
ngừa ựược bệnh tim mạch
đánh giá trực tiếp thành phần omega 3,6,9 bằng sắc ký lỏng sẽ không tách triệt ựể các
axit béo này vì chúng có nhiệt ựộ sôi gần nhau Do ựó, ựánh giá gián tiếp các axit béo
omega 3,6,9 bằng cách este chéo hóa rồi sử dụng GC-MS sẽ tách các chất tốt hơn và
tiết kiệm hơn
Bài nghiên cứu này trình bày phương pháp ựánh giá thành phần các acid béo có trong
mỡ cá quả Thực hiện phản ứng ester chéo hóa mỡ cá quả với ethanol sử dụng xúc tác
Zn,P/ γ -Al2O3 Sản phẩm ựược phân tắch và ựánh giá bằng GC-MS
3 Synthesis of biodiesel from fat acids using sulfated zirconia catalysts
Delgermurun Choijilsuren, International Student
Supervisor: Assoc Prof Le Thanh Sơn
www.chemvnu.edu.vn
Trang 3Fossil fuel resources are decreasing daily; Biodiesel fuels are attracting increasing
attention worldwide as blending components or direct replacements for diesel fuel in
vehicle engines Biodiesel fuel is a renewable substitute fuel for petroleum diesel or
petro diesel fuel made from vegetable or animal fats; it can be used in any mixture
with petro diesel fuel as it has very similar characteristics, but it has lower exhaust
emissions Biodiesel fuel has better properties than petrodiesel fuel; it is renewable,
biodegradable, non-toxic, and essentially free of sulfur and aromatics Zirconia has
shown catalytic activity and also good support for catalysts, owing to its high thermal
stability and the amphoteric character of its surface hydroxyl groups Sulfated zirconia
is example of solid super acids and exhibited high catalytic activities because of active
acid sites
4 TiO2 –loaded-MCM-41 Material Synthesis
Bui Van Duong, K53T Chemistry
Supervisor: Assoc Prof Do Quang Trung
In 1990 a significant change took place in nanoporous science when Mobil researchers
reported an M41-S mesoporous material synthesis with uniform size in the
mesoporous materials range (2 to 50nm) The advent of this materials has created
powerful breakthrought in the field of science and catalysis adsorption MCM-41
material is representative of their mesoporous materials, with evenly size pore 2,5 –
5nm, hexagonal, one dimensional, honeycomb-like lattice and the surface area over
1200m2/g Therefore, MCM-41 has been widely applied in adsorption, environment
treatment and catalyst for chemical technology process MCM-41 was synthesized
manily from TEOS and CTAB In order to improve absorptive capacity of materials
in evironmental treatment, the mesoporous MCM – 41 materials have been modified
with several elements such as: Al, Ti, Fe…
This study, synthesis of MCM-41 substrate material and SiO2 that have hight surface
area suitable for nanoscale TiO2 dispersion Characteristic of materials were
determined by XRD, TEM, BET technology
Tổng hợp vật liệu MCM-41 mang TiO 2
Bui Van Duong Lớp K53 TT, Năm học: 2010-2011
Cán bộ hướng dẫn: ðỗ Quang Trun
ðầu thập niên 90 của thế kỷ 20, các nhà khoa học hãng Mobile-Oil ñã phát minh ra
vật liệu mao quản trung bình M41-S có kích thước mao quản ñồng ñều, tập trung
www.chemvnu.edu.vn
Trang 4trong khoảng từ 2-50nm, sự ra ñời của các vật liệu này ñã tạo nên bước ñột phá mạnh
mẽ trong lĩnh vực khoa học vật liệu xúc tác và hấp phụ Vật liệu MCM-41 là ñại diện
tiêu biểu của họ vật liệu mao quản trung bình, có hệ mao quản ñồng ñều kích thước
mao quản cỡ 2.5 - 5nm, hình lục lăng, một chiều, xắp sếp xít nhau tạo nên cấu trúc tổ
ong, diện tích bề mặt có thể lên ñến 1200m2/g Vì vậy, MCM-41 ñược ứng dụng nhiều
trong hấp phụ, xử lý môi trường và xúc tác cho nhiều quy trình công nghệ hoá học
MCM-41 ñược tổng hợp chủ yếu từ TEOS và chất tạo cấu trúc CTAB ðể tăng hiệu
quả hấp phụ trong xử lý môi trường, MCM-41 thường ñược biến tính bằng cách gắn
thêm các kim loại khác như Al, Ti, Fe…
Nghiên cứu này thực hiện việc tổng hợp vật liệu nền MCM-41 và SiO2 có diện tích bề
mặt lớn thích hợp cho việc phân tán TiO2 kích thước nano Các ñặc trưng của vật liệu
ñược xác ñịnh bằng các kỹ thuật XRD, TEM, BET
5 Monitoring levels of Dioxin/Furan emissions into the environment in industrial
waste incinerators
Lê Quang ðiệp, Class: K53 Advanced Chemitry programme
Supervisor: Dr Phạm Thị Ngọc Mai & Dr Nguyễn Hùng Minh
Polyclodibenzo-para-dioxin (PCDD) and polyclodibenzo-furan (PCDF) are commonly
regarded as highly toxic compounds which affect human health and the environment
According to the research of scientists around the world, dioxin was not only known
compound contained in the herbicide that the U.S military has used in Vietnam, but it
was also formed during unintentional emissions, through burning chloride- containing
organic compounds, combustion of organic compounds containing chlorine at 250oC
to 450oC temperature It was transported from the waste furnace into the environment
such as air, soil, water, and bringing exposure to drinking water, food and vegetables
Waste combustion is one of the potential emission sources, and according to the
US-EPA, this operation release a significant amount of dioxin emissions into the
environment (US-EPA, 1998) Emissions of dioxins/furans from waste combustion
operations have been studied in developed industrial countries since 60s and in the
developing Asian countries such as China, Taiwan since 2000 However, in Vietnam
there are very few of the scientific research on this issue So the report Monitoring
levels of Dioxin/Furan emissions into the environment in industrial waste incinerators
is one of the contributions that shows the levels of dioxin/furan emissions into the
environment around industrial areas in northern Vietnam
Quan trắc mức ñộ thải ñioxin/furan vào môi trường trong công nghiêp
www.chemvnu.edu.vn
Trang 5Lê Quang điệp, Class: K53 Advanced Chemitry programme
CBHD: TS Phạm Thị Ngọc Mai & TS Nguyễn Hùng Minh
Polyclodibenzo-para-dioxin (PCDD) và polyclodibenzo-furan (PCDF) là các chất siêu
ựộc gây nên nhiều ảnh hưởng xấu ựối với sức khỏe con người và môi trường Theo
các nghiên cứu của các nhà khoa học trên thế giới, dioxin không chỉ ựược biết chứa
trong chất diệt cỏ mà quân ựội Mỹ ựã sử dụng ở Việt Nam, mà còn ựược hình thành
và phát thải không chủ ựịnh, do quá trình ựốt cháy các hợp chất hữu cơ có chứa clo ở
nhiệt ựộ từ 250oC ựến 450oC, ựược lưu chuyển từ các lò ựốt chất thải ra môi trường
như không khắ, ựất, nước và sau ựó gây phơi nhiễm tới nước uống, thực phẩm và rau
quả.Hoạt ựộng ựốt chất thải là một trong những nguồn phát thải tiềm tàng, và theo
ựánh giá của US-EPA thì hoạt ựộng này phát thải khá nhiều lượng dioxin vào môi
trường (US-EPA, 1998) Sự phát thải của dioxin/furan từ hoạt ựộng ựốt chất thải ựã
ựược nghiên cứu ở các nước công nghiệp phát triển từ những thập niên 60 và ở các
nước châu Á ựang phát triển như Trung Quốc, đài Loan từ những năm 2000 Tuy
nhiên, ở Việt Nam có rất ắt các công trình khoa học nghiên cứu về vấn ựề này Vì vậy,
báo cáo đánh giá hàm lượng Dioxin/Furan phát thải vào môi trường ở lò ựốt rác thải
công nghiệp là một trong những ựóng góp cho thấy ựược hàm lượng dioxin/furan thải
vào môi trường quanh các khu công nghiệp ở miền Bắc Việt Nam
6 Study of synthesis of phenyl substituted synones
Ly Thi Giang
Supoervisor: Nguyen Dinh Thanh
Some phenyl substituted sydnones were synthesized by reaction of N-nitroso
(4-fluorophenyl) glycine, N-nitroso(5-chloro-2-methylphenyl) glycine, N-nitroso
(2,4-dimethylphenyl) glycine, and N-nitroso (4-methoxy-2-methylphenyl) glycine with
acetic anhydride The reaction mixture was left overnight at room temperature and
poured into cold water The structure of obtained sydnones were confirmed using IR
spectroscopy
đÓNG GÓP VÀO TỔNG HỢP MỘT SỐ SYDNONE
Ly Thi Giang
Supoervisor: Nguyen Dinh Thanh
Một số sydnone ựã ựược tổng hợp bằng phản ứng của N-nitroso (4-flophenyl) glycin,
N-nitroso(5-clo-2-methylphenyl) glycin, N-nitroso (2,4-dimethylphenyl) glycin, and
www.chemvnu.edu.vn
Trang 6N-nitroso (4-methoxy-2-methylphenyl) glycin với anhydrit axetic Hỗn hợp ựược ựể
qua ựêm ở nhiệt ựộ phòng và ựổ ra nước lạnh Cấu trúc của các sydnone ựược xác
nhận bằng phổ IR
7 Contribution to synthesis of N-Nitrosoisantin derivatives
Lê Thị Thu Hà Class: k53TT
Supervisors: Assoc Pro Nguyen Dinh Thanh & Nguyen Thi Kim Giang
Some substituted isatin were prepared form corresponding R-anilines, with R
= H, p-CH3 ,o-CH3, 2,3-dimethyl by SandmeyerỖs method Some N-Nitrosoisatin
derivatives were synthesized by reaction between 2 different nitrosating agent NO2
,butyl nitrite and the corresponding substituted isatins in the presence of the
hydrochloric acid in solvent of ethanol and water The reactions were done with
stirring in 4h and the temperature was hold between 0-50C It shows that the reactions
with butyl nitrite lead to higher yield than reactions with NO2. The structureof
products were confirmed using IR spectroscopy
GÓP PHẦN NGHIÊN CỨU TỔNG HỢP MỘT SỐ DẪN XUẤT
N-NITROSOISATIN
Lê Thị Thu Hà, Lớp : K53TT
CBHD: PGS.TS.Nguyễn đình Thành vaf NCS.ThS Nguyễn Thị Kim Giang
đề tài ựã tổng hợp ựược một số isatin thế từ các R-aniline thế khác với R là H,
p-CH3 ,o-CH3, 2,3-dimethyl bằng phương pháp Sandmeyer Từ ựó, ựã tiến hành tổng
hợp các dẫn xuất N-Nitrosoisatin bằng phản ứng của 2 tác nhân NO2 hoặc butyl nitrite
với các isatin thế tương ứng với sự có mặt của axit clohidric trong dung môi etanol và
nước Các phản ứng ựược thực hiện trong 4 giờ và nhiệt ựộ giữ trong khoảng 0-50C
Kết quả cho thấy phản ứng sử dụng tác nhân butyl nitrite cho hiệu suất cao hơn so với
tác nhân NO2 Cấu trúc sản phẩm ựược xác nhận bằng phổ IR
8 Determination of phthalate in cosmetics and foods by HPLC-UV
Ha Dang Hung, K53 Advanced Chemistry, 2011-2012
Supervisors: Assoc.Prof Ta Thi Thao
Phthalate ester are used in a variety of industrial and consumer applications, including
plasticizers, used as solvents and odorless diluents in cosmetics and perfume All
phthalates show acute toxicity and were studied and researched in last recent years
www.chemvnu.edu.vn
Trang 7such as exposure, Endocrine Disruption and causing cancer ), especially diethyl
phthalate (DEP), DBP (dibutyl phthalate) and DEHP (di-(2-ethyl hexyl) phthalate) can
cause damage to reproductive organs, lungs, kidneys A simple and sensitive
high-performance liquid chromatography with ultraviolet detection (HPLC-UV) method
has been developed and validated for simultaneous quantitative and qualitative the
method was prepared by using Shimadzu HPLC instrument with standard ampicillin
which was measured These techniques permit detection of phthalates at a level of
10.0–100.0 ppm Overall recoveries were 85–108% with RSD values of 4.2–8.8%
The predominant phthalates detected in this studied samples were DMEP (Dimethyl
glycol phtalat) , DHP(Di-hexyl phtalat) , DCHP(Di-cyclohexyl Phtalat) ,
DEHP(Di-2-etyl hexyl phtalat) , DBP(Di-butyl phtalat)
Nghiên cứu xác ñịnh phthalates trong mỹ phẩm và thực phẩm bằng HPLC-UV
Ha Dang Hung, K53 Advanced Chemistry, 2011-2012
Supervisors: Assoc.Prof Ta Thi Thao
Phthalate ester ñược sử dụng rộng rãi trong nhiều lĩnh vực công nghiệp, làm dung môi
và dung dịch pha loãng trong mỹ phẩm và nước hoa ðộc tính của phthalate ñã và
ñang ñược nghiên cứu khắp nơi trong nhiều thập kỉ gần ñây, 1 số ñộc tính ñặc trưng
như làm xáo trộn nội tiết và là tác nhân gây ung thư Trong ñó, có một nhóm ñã ñược
nêu ñích danh là ester phtalat, trong ñó có DEP (diethyl phtalat), DBP (dibutyl phtalat)
và DEHP (di- (2-ethyl hexyl) phtalat) DEP - một chất thường ñược dùng làm thuốc
trị ghẻ - có mặt trong rất nhiều loại mỹ phẩm Chất này nằm trong nhóm ester phtalat,
có thể gây tổn thương cho cơ quan sinh sản, phổi, thận, ñặc biệt là tạo khối u ở gan
Phương pháp nghiên cứu là hệ sắc ký lỏng hiệu năng cao, detector PDA ñể nghiên cứu
và phân tích quá trình tách và ñịnh lượng và ñịnh tính các phtalat trong mỹ phẩm., với
giới hạn phát hiện trong khoảng 10-100 ppm, hiệu suất thu hồi khoảng 85-108% và ñộ
lệch chuẩn tương ñối (RSD) khoảng 4.2-8.8 % Các mẫu ñược nghiên cứu trong thực
nghiệm lần này là các chất DMEP (Dimethyl glycol phtalat) , DHP(Di-hexyl phtalat) ,
DCHP(Di-cyclohexyl Phtalat) , DEHP(Di-2-etyl hexyl phtalat) , DBP(Di-butyl
phtalat)
9 Synthesis of Sulfated zirconia supported over mesoporous SBA-15 catalyst for
n-ankane isomerization
Do Trung Hieu, K53T Chemistry
Advisor: Associate Prof Le Thanh Son
www.chemvnu.edu.vn
Trang 8Sulfated zirconia SZ was improved the acidic catalysis following expansion
surface area of crystal in tetragonal phase Firstly fine SZ crystals (nano size) were
well dispersed over surface of SBA-15 On the other hand mesoporous superacid
catalysts SO42-/ZrO2–SiO2 (SZSM) have been one-pot synthesized and characterized
by physical methods: XRD, IR, FESEM, TEM The XRD patterns, TEM and FESEM
images of the calcined samples showed that they have very ordered mesoporous
structure, tetragonal crystalline of ZrO2-SiO2 in frameworks The TPD-NH3, IR
spectrum were used to determine the strength of Bronsted and Lewis sites in the
samples, n-ankane isomerization proof acidic property of catalyst SZSM As the
results SBA-15/SZ and SZSM are good catalysts for large molecules metabolism
Tổng hợp zirconia sunfat hóa trên nền mao quản trung bình SBA-15 làm xúc tác
cho phản ứng ñồng phân hóa n-ankan
Do Trung Hieu, K53T Chemistry
Advisor: Associate Prof Le Thanh Son
Zirconia sunfat hóa SZ ñược tăng tính xúc tác axit theo hướng tăng diện tích bề
mặt pha tứ diện của tinh thể bằng cách phân tán tinh thể nhỏ (nano) lên bề mặt của
SBA-15, mặt khác ñã tạo ra vật liệu mao quản trung bình có cấu trúc thành là SO4
2-/ZrO2-SiO2 (SZSM) ở pha tứ diện Vật liệu ñược nghiên cứu thông qua các phương
pháp: nhiễu xạ tia- X, IR, phương pháp SEM, TEM, BET, ñồng phân hóa n-hecxan,
phương pháp GC Phổ XRD xuất hiện các pic ở góc nhỏ và lớn cho thấy tinh thể SZ ở
pha tứ diện, có cấu trúc mao quản trung bình SEM, TEM cho thấy tính ổn ñịnh ñều
ñặn của bề mặt, cấu trúc thành của vật liệu; kết quả IR, TPD-NH3 và GC chứng minh
tính axit của vật liệu ñã tổng hợp Với các tính chất trên thì xúc tác SBA-15/SZ và
SZSM thích hợp cho phản ứng chuyển hóa các phân tử hữu cơ mạch dài
10 Microwave-assisted method in the synthesis of Pichromene derivatives
Doan Thu Hong, K53 Advanced Chemistry,
Supervisors: Prof Dr Sci Luu Van Boi & Dr Mac Dinh Hung
Pichromene or 8-ethoxy-2-(4-fluorophenyl)-3-nitro-2H-chromene displays the
impressive effects as medicinal agent for blood cancer therapy In our research,
microwave-assisted, the method offers the considerable advantages over conventional
synthesis with rate enhancements and cleaner reactions, were applied in the synthesis
of Pichromene derivatives from salicylaldehydes and trans-β-nitrostyrenes
www.chemvnu.edu.vn
Trang 9Firstly, trans-β-nitrostyrene derivatives were prepared according to Henry
reaction Best reaction condition was investigated with highly purity of desired
product obtained by recrystallizaion with appropriate choice of solvent The structure
of products were determined by IR, 1H-NMR and 13C-NMR spectroscopy
With these starting materials in hand, Pichromene and its derivatives were
prepared by a mixture of trans-β-nitrostyrenes and salicylaldehydes in toluene as
solvent, pipecolinic acid as catalyst which were stirred in microwave oven (400W,
1050C) for about 1 hour The crude was purified by column chromatography Their
structure were confirmed by IR, 1H-NMR and 13C-NMR spectroscopy
Phương pháp ứng dụng lò vi sóng trong việc tổng hợp dẫn xuất của Pichromene
Doãn Thu Hồng, K53 Hoá tiên tiến, Khoa Hoá Học, đHKHTN, đHQGHN
Cán bộ hướng dẫn: PGS.TSKH Lưu Văn Bôi & TS Mạc đình Hùng
Pichromene hay 8-ethoxy-2-(4-fluorophenyl)-3-nitro-2H-chromene là tác nhân
quan trọng ựược sử dụng trong việc chống lại bệnh ung thư máu Các dẫn xuất của
Pichromene ựược ựiều chế dựa trên cơ sở phản ứng giữa các dẫn xuất của
salicylaldehyde và trans-β- nitrostyrene trong lò vi sóng, ựem lại nhiều ưu ựiểm hơn
so với kỹ thuật ựun nóng thông thường
Trước tiên, các dẫn xuất của trans-β- nitrostyrene ựược tổng hợp dựa theo phản
ứng Henry Sản phẩm thu ựược bằng phương pháp kết tinh lại trong dung môi thắch
hợp có ựộ tinh khiết cao Các sản phẩm này ựược xác ựịnh cấu trúc bằng phổ IR, 1
H-NMR và 13C-NMR
Sau ựó, phản ứng của các dẫn xuất của trans-β-nitrostyrene và salicylaldehyde
trong dung môi toluen với xúc tác pipecolinic acid ựược thực hiện trong lò vi sóng với
www.chemvnu.edu.vn
Trang 10công suất 400W ở 1050C trong vòng 1 giờ Dẫn xuất của Pichromene ựược tách khỏi
sản phẩm thô bằng phương pháp sắc ký cột Cấu trúc của các dẫn xuất này ựược xác
ựịnh bằng phổ IR, 1H-NMR and 13C-NMR
11 Preparation of N Ờ doped Titanium dioxide powder by hydrolysis method
Vu Thi Huong, Class : K53 Advanced Chemistry
Supervisor: Associate Prof Dr Ngo Sy Luong
Initially survey the preparation of TiO2 powder was denatured by Nitrogen from the initial substance TiCl4 in ammoniac solution The results showed that appropriate conditions for the modification are: molar ratio between nitrogen and Ti4+ is 2.0; temperature reduction and hydrolysis of 90 Ờ 95oC during 2 hours, the drying temperature is 100oC in 12 hours in
a vacuum oven; heated products at 600oC in 2 hours With the institutionalization of the conditions above, the nitrogen- doped TiO2 powder substance from the initial TiCl4 in ammoniac solution having the photocatalytic activity of the product shift in the visible light and methylene blue degradation efficiency higher ( > 97oC) compared to non Ờ doped TiO2 powder ( ~ 82.5%)
Nghiên cứu ựiều chế vật liệu titan dioxit kắch thước nano met ựược biến tắnh
bằng nitơ
Vũ Thị Hương Ờ Lớp K53 Hóa Tiên Tiến, Năm học: 2011 Ờ 2012
CB hướng dẫn: PGS.TS Ngô Sỹ Lương
đã bước ựầu khảo sát quá trình ựiều chế bột TiO2 ựược biến tắnh Nitơ từ chất ựầu TiCl4 trong dung môi amoniac Kết quả khảo sát cho thấy, ựiều kiện thắch hợp cho quá trình biến tắnh là: Tỉ lệ mol giữa Nitơ và Ti4+ là 2.0; Nhiệt ựộ khử và thủy phân từ 90-95oC trong thời gian 2h, nhiệt ựộ sấy là 100oC trong thời gian 12h trong tủ sấy chân không; Nung sản phẩm ở 600oC trong 2h Với ựiều kiện chế hoá trên, bột TiO2 ựược biến tắnh Nitơ từ chất ựầu TiCl4 trong dung môi amoniac có hoạt tắnh quang xúc tác của sản phẩm dịch chuyển về vùng ánh sáng nhìn thấy và hiệu suất phân huỷ xanh metylen cao hơn (>97%) so với bột TiO2 không biến tắnh (~82.5%)
12 Determination of heavy metals content in human hair samples from Hung
Yen province
Doan Ngoc Lan, K53 advanced chemistry, Academic year: 2011-2012
Supervisors: Assoc.Prof Ta Thi Thao
www.chemvnu.edu.vn
Trang 11Damage from industrial pollution often is irreversible and it can undermine future
growth of Vietnam by destroying landscape, impairing land productivity and human
health My study focuses on heavy metals content in hair samples collected in Hung
Yen province Providing an overview about alarmingly industrial polluted situation,
this research based on determination of Lead, Cadmium and Zinc by Flame – Atomic
absorption spectroscopy 4 methods of digestion of hair samples were estimated to
determine the best method for hair samples preparation 0.2 gram of a hair sample wet
digested with 5ml of concentrated HNO3 acid, 1ml of H2SO4 acid, 1ml of distillated
water and 1ml of H2O2 30% in Teflon bottle, being heated for 90min at 180oC is the
chosen method The calibration curves of Lead, Cadmium and Zinc were established
to determine the concentration of each metal in the samples By F-AAS method, the
amount of Pb2+, Cd2+ and Zn2+ in 6 hair samples of people living in Hung Yen
province was determined
Xác ñịnh hàm lượng kim loại nặng trong mẫu tóc của người dân trên ñịa bàn
tỉnh Hưng Yên
Doan Ngoc Lan, Lớp: K53 hóa tiên tiến, Năm học: 2011-2012
Giáo viên hướng dẫn: PGS TS Ta Thi Thao
Thiệt hại từ ô nhiễm công nghiệp thường là không thể ñảo ngược và nó có thể
làm suy yếu tăng trưởng tương lai của Việt Nam bằng cách phá hủy cảnh quan, ñất ñai
và làm suy yếu và sức khỏe con người Nghiên cứu của tôi tập trung vào việc xác ñịnh
hàm lượng kim loại nặng trong mẫu tóc thu ñược trên ñịa bàn
tỉnh Hưng Yên.Cung cấp một cái nhìn tổng quan về tình hình ô nhiễm ñáng báo
ñộng công nghiệp, nghiên cứu này dựa trên việc xác ñịnh hàm lượng cacdimi, chì và
kẽm theo phương pháp ngọn lửa - phổ hấp thụ nguyên tử 4 phương pháp xử lí mẫu
tóc ñã ñược xem xét ñể xác ñịnh phương pháp tốt nhất cho việc chuẩn bị mẫu 5ml
dung dịch axit HNO3 ñặc, 1ml H2SO4 axit,1ml nước cất và 1ml H2O2 30% vào
bình Teflon chứa 0.2g mẫu tóc, ñun nóng trong 90 phút ở 180oC là phương
pháp ñược lựa chọn Bằng phương pháp F-AAS, nồng ñộ của Pb2+, Cd2+ and Zn2+
trong 6 mẫu tóc của người dân sống trên ñịa bàn tỉnh Hưng Yên ñã ñược xác ñịnh dựa
vào ñường chuẩn của Pb2+, Cd2+ and Zn2+ ñc thiết lập với các ñiều kiện tối ưu
13 Study on synthesis P, K, Zn, La γ-Al 2 O 3 material using as catalyst for
monoglyceride production
Hoang Thi Thanh Lan, Class: K53 Advanced Chemistry
Supervisor:Associate Prof Dr Tran Thi Nhu Mai
www.chemvnu.edu.vn
Trang 12
In this research, P,K,Zn,La/γ-Al2O3 material was synthesized for the reaction of
glycerol with grease to form monoglyceride Firstly, gamma alumina was synthesized
from Al(NO3)3·9H2O precusour by sol-gel method The best molar ratio of Al3+/Urea
was 1/13 γ-Al2O3 is then dopped with Zn,La,K,P using KOH, Zn(CH3COO)2.2H2O,
La(NO3)3.6H2O, H3PO4 4M and calcinated at 4500C in 3 hours The catalyst was
characterized by X-ray diffraction, IR spectroscopy and Energy dispersive X-ray
spectroscopy methods IR spectroscopy and X-ray diffraction showed that there
existed the peaks that stand for gamma alumina and some other components that was
sticked on the surface of gamma alumina to change both its active site and force acid
The EDX spectroscopy of P,K,Zn,La/γ-Al2O3 material shows that all of the desired
elements were present in the sample The product of reaction between glycerol and
grease was characterized by IR spectroscopy The spectroscopy shows that
monoglyceride was formed
NGHIÊN CỨU TỔNG HỢP VẬT LIỆU P,K,Zn, La/ γ-Al2 O 3 ðƯỢC SỬ DỤNG
LÀM XÚC TÁC CHO QUÁ TRÌNH ðIỀU CHẾ MONOGLYXERIT
Hoàng Thị Thanh Lan, Lớp: K53TT, Khoa hóa học, trường ðHKHTN-ðHQGHN
GVHD: PGS.TS.NGƯT Trần Thị Như Mai
Trong nghiên cứu này, vật liệu P,K,Zn,La/γ-Al2O3 ñã ñược tổng hợp làm xúc tác
cho phản ứng giữa glycerol và mỡ ñộng vật, ñiều chế monoglyxerit Trước tiên,
γ-Al2O3 ñược tổng hợp từ tiền chất Al(NO3)3·9H2O bằng phương pháp sol-gel Khảo sát
cho thấy, tỷ lệ mol Al3+/Ure tốt nhất ñể hình thành dạng sol là 1/13 γ-Al2O3 sau ñó
ñược biến tính bằng Zn,La,K,P sử dụng các tiền chất: KOH, Zn(CH3COO)2.2H2O,
La(NO3)3.6H2O, H3PO4 4M và ñược nung ở 4500C trong 3 giờ Vật liệu ñiều chế ñược
ñặc trưng bởi các phương pháp: nhiễu xạ tia X, phổ hồng ngoại và phương pháp tán
sắc năng lượng tia X Kết quả phổ X-ray và phổ hồng ngoại ñã chỉ ra rằng có sự tồn
tại của các peak ñặc trưng cho γ-Al2O3 và xuất hiện một số các thành phần khác ñược
gắn lên bề mặt của γ-Al2O3 trong mẫu biến tính có khả năng làm thay ñổi lực axit của
vật liệu xúc tác Phổ tán sắc năng lượng tia X cho thấy sự có mặt của hầu hết các
nguyên tố Al,O, P,K,Zn,La trong mẫu vật liệu Sản phẩm của phản ứng giữa glyxerol
và mỡ ñộng vật ñược ñặc trưng bởi phương pháp phân tích phổ hồng ngoại Kết quả
cho thấy monoglyxerit ñã hình thành
14 Isolation of omega-3 fatty acids from fish oil by liquid chromatography
Phạm Trọng Lâm, K53 AC
www.chemvnu.edu.vn
Trang 13Instructor: Assoc Prof., Dr Sci Lưu Văn Bôi
Omega-3 fatty acids are essential for normal development of our human body
They are added to commercial cooking oil to increase the nutrient value and to prevent
some diseases Isolation of omega-3 acids from natural sources is of current interest
This study investigates the potential and looks for the appropriate conditions on liquid
chromatographic equipment to separate omega-3 acids from fish oil, a side product
readily available from food-processing industry of Vietnam First, the fatty acids in
fish oil are converted into methyl ester form (FAME) by tranesterification reaction
Then the separation conditions (temperature, solvent, mobile phase velocity, column
type) are step-by-step investigated on UFLC apparatus However, the obtained results
are still limited when investigating temperature factor, some peaks are still
overlapping one another Therefore, this study requires more time to discover the
suitable conditions for separation
Tách axit omega-3 từ dầu mỡ cá bằng phương pháp sắc ký lỏng
Phạm Trọng Lâm, Lớp: K53 TN-TT Hóa
CBHD: PGS.TSKH Lưu Văn Bôi
Axit omega-3 là họ chất quan trọng ñối với sự phát triển ñầy ñủ của cơ thể
Axit này ñược thêm vào dầu ăn ñể làm tăng giá trị dinh dưỡng và phòng chống một số
bệnh Việc phân lập omega-3 từ nguyên liệu trong tự nhiên ñang thu hút nhiều sự
quan tâm Nghiên cứu này khảo sát khả năng và tìm ra ñiều kiện trên thiết bị sắc ký
lỏng ñể tách axit omega-3 từ dầu mỡ cá, một phụ phẩm sẵn có của ngành công nghiệp
chế biến hải sản tại Việt Nam Trước tiên, các axit béo trong mỡ cá ñược chuyển sang
dạng methyl ester (FAME) nhờ phản ứng trasesterification Sau ñó các ñiều kiện tách
(nhiệt ñộ, dung môi, tốc ñộ pha ñộng, loại cột) từng bước ñược khảo sát trên máy
UFLC Tuy nhiên, kết quả thu ñược còn hạn chế khi khảo sát yếu tố nhiệt ñộ, nhiều
pic vẫn chèn vào nhau Do ñó, nghiên cứu cần thêm thời gian ñể tìm ra ñiều kiện tách
thích hợp
15 Chromatographic isolation and structure determination of peptide
compounds from Euphorbia thymifolia Burm (Euphorbiaceae)
Vu Hoang Nam, K53 Advanced chemistry, Faculty of Chemistry, VNU
Supervisor: Assoc.Prof Phan Minh Giang
www.chemvnu.edu.vn
Trang 14Euphorbia (Euphorbiaceae) is a plant genus known to produce many phytochemicals
which are active towards different biological targets The plant Euphorbia thymifolia
is a medicinal plant of Vietnam and has not been systematically investigated on its
chemical constituents Our research “Chromatographic isolation and structure
determination of peptide compounds from Euphorbia thymifolia Burm
(Euphorbiaceae)” studied isolation of its minor peptide constituents by using
chromatographic techniques and archived the following new results:
1 We developed an efficient procedure to extract organic compounds from the leaves
of Euphorbia thymifolia Burm The n-hexane (ET1), dichloromethane (ET2) and
ethyl acetate (ET3) soluble fractions were obtained in good yields of 3.14%, 0.58%,
and 0.5% from the MeOH extract, respectively
2 The n-hexane-soluble fraction from leaves of Euphorbia thymifolia was analyzed
qualitatively by TLC Based on the TLC analysis, the fractionation of this fraction by
using various combinations of chromatographic techniques was carried out
3 Two minute compounds I and II were isolated in the pure form The structure of
compound I was unambiguosly determined by spectroscopic analysis as
asperglaucide, a biologically active peptide This compound was isolated for the first
time from Euphorbia thymifolia
Phân lập sắc kí và xác ñịnh cấu trúc các hợp chất peptid từ cây Cỏ sữa lá nhỏ
(Euphorbia thymifolia Burm, Euphorbiaceae)
Vũ Hoàng Nam, K53 Hóa tiên tiến, Năm học: 2011-2012
Giáo viên hướng dẫn: PGS TS Phan Minh Giang
Euphorbia (Euphorbiaceae) là một chi thực vật ñược biết ñến là tổng hợp nhiều hợp
chất thiên nhiên giàu hoạt tính sinh học Cây Cỏ sữa lá nhỏ là một loài cây thuốc của
Việt Nam và chưa ñược nghiên cứu một cách hệ thống về thành phần hóa học Nghiên
cứu của chúng tôi “Phân lập sắc kí và xác ñịnh cấu trúc các hợp chất peptid từ cây Cỏ
sữa lá nhỏ (Euphorbiaceae)” nghiên cứu việc phân lập các hợp chất peptide hàm
lượng thấp từ cây cỏ sữa lá nhỏ bằng cách sử dụng kĩ thuật sắc kí và ñạt ñược một số
kết quả mới sau:
1 Chúng tôi ñã phát triển một quy trình hiệu quả ñể chiết tách các hợp chất hữu cơ từ
lá cây Cỏ sữa lá nhỏ Các phân ñoạn tan n-hexan (ET1), dichloromethan (ET2) and
ethyl acetat (ET3) nhận ñược có hiệu suất cao với hàm lượng tương ứng là 3.14%,
0.58%, and 0.5%
www.chemvnu.edu.vn
Trang 152 Phân ñoạn tan n-hexane lá cây Cỏ sữa lá nhỏ ñược phân tích ñịnh tính bằng sắc kí
lớp mỏng Trên cơ sở phân tích sắc kí lớp mỏng, phân tách phân ñoạn này ñươc thực
hiện bằng cách kết hợp các phương pháp sắc kí
3 Hai hợp chất có hàm lượng thấp là I và II ñược phân lập tinh khiết Cấu trúc của
hợp chất I ñã ñược xác ñịnh bằng các phân tích phổ là asperglaucide, một peptid có
hoạt tính sinh học Hợp chất này ñã ñược phân lập lần ñầu tiên từ cây cỏ sữa lá nhỏ
16 Study on synthesis zeolite CuY and application of CuY zeolite as catalyst for
isomerization of α- pinene
Phạm Thị Hương Ngát, Class: k53 advanced programme,
Supervisor: Assor Pro Trần Thị Như Mai & Nguyễn Thị Thu Hà
Nowadays, the chemical industry is under increased pressure to develop cleaner
production processes and technologies Isomerization of α- pinene produces bicylic
and monocyclic compounds and other products is a promising way since isomers such
as limonene and camphene are useful materials They are used as a flavor and
fragrance additive in pharmacy, perfumes, soaps, foods, chewing gum, beverages and
so on
In this study, zeolite Y was exchanged with CuCl2 0.1M in 5h Then, the
material was tested by XRD and EDX to characterize crystallization and components,
respectively Results show that ion exchange was successful and had no effect on
crystal zeolite The catalytic property of material was studied by reaction of α- pinene
in 5h at 70°C and in 3h at 100°C Products were analyzed by GC-MS technique
Products were limonene, camphene, carene, β- pinene which have MS patterns with
high reliability
Tổng hợp zeolite CuY và ứng dụng xúc tác của zeolite CuY trong phản ứng ñồng
phân hóa α- pinene
Phạm Thị Hương Ngát, Lớp: k53 advanced programme
Cán bộ hướng dẫn: Assor Pro Trần Thị Như Mai & Nguyễn Thị Thu Hà
Hiện nay, công nghiệp hóa chất ngày càng ñòi hỏi phải phát triển các quy trình
và công nghệ sản xuất sạch Phản ứng ñồng phân hóa của α-pinene cho các sản phẩm
vòng 2, vòng 1 và các sản phẩm khác là một hướng ñầy hứa hẹn, ñiển hình như
camphene và limonene Chúng ñược ứng dụng nhiều làm hương liệu trong sản xuất
dược phẩm, nước hoa, thực phẩm, hương liệu
www.chemvnu.edu.vn
Trang 16Trong báo cáo này, zeolite Y ñược dùng ñể trao ñổi ion với dung dịch CuCl2
0.1M trong 5h ở 70°C và trong 3h ở 100°C Kết quả thu ñược từ nhiễu xạ tia X chứng
tỏ cấu trúc của zeolite không bị biến ñổi, kết quả thu ñược từ EDX chứng tỏ quá trình
trao ñổi ion với Cu2+ là khá tốt Sản phẩm của phản ứng ñồng phân hóa ñược phân tích
bằng phương pháp GC-MS Sản phẩm thu ñược là limonene, camphene, carene, β-
pinene với ñộ tin cậy cao
17 Sefl-assembled monolayers: A new orientation for electrochemical sensor
area
Trương Ngọc Thành, Lớp 53TT Năm học 2011-2012
Giáo viên hướng dẫn: PGS TS Nguyễn Thị Cẩm Hà
Self-Assembled Monolayer (SAM) was prepared by chemisorption of
alkanethiolates on gold and gold-nanoparticles on glassycarbon surface The
properties of SAM were tested by reductive desorption, based on cyclic voltammetry
method The obtained results show that SAM can be obtained on gold and
gold-nanoparticle surface by absorption method, and gold-gold-nanoparticle gives better results
SAM of 3-mercaptopropionic acid was used for detection of Cu2+ in water to the
concentration ppb
ðơn lớp tự sắp xếp, hướng ñi mới trong lĩnh vực chế tạo sensor ñiện hóa
Trương Ngọc Thành., Lớp 53TT Năm học 2011-2012
Giáo viên hướng dẫn: PGS TS Nguyễn Thị Cẩm Hà
ðơn lớp tự sắp xếp (SAM) ñược chế tạo bởi sự hấp phụ hóa học của các
alkathiol trên bề mặt vàng và vàng nano biến tính trên bề mặt glassycarbon Tính chất
của SAM ñược kiểm tra bằng phương pháp khử hấp phụ, dựa trên sự quét phân cực
vòng Kết quả thu ñược cho thấy SAM có thể thu ñược thông qua phương pháp hấp
phụ, và bề mặt vàng-nano cho các kết quả tốt hơn Sử dụng SAM của axit 3-thiol
propionic cho phép xác ñịnh nồng ñộ của Cu2+ trong nước ñến cỡ phần triệu (ppb)
18 Determination of organophosphorous pesticides using molybdenum blue
method
Nguyen Hoai Thu- K53TT
Assoc Prof – Dr Ta Thi Thao
www.chemvnu.edu.vn
Trang 17Organophosphorous pesticides (OPs) are widely used in agriculture to kill
insects and help improve productivity Despite the advantages achieved by applying
organophosphorous pesticides , it is undeniable that those chemicals have negative
effects on ecological environment due to the residue of OPs in agricultural products,
soil, atmosphere and water system Although OPs are easily hydrolyzed to form
products of lower toxicity and their half-life is much shorter than those of PCBs, they
are highly neurotoxic to humans and animals Recently, various methods have been
applied in determination of OPs in which molybdenum blue method is a simple,
inexpensive and sensitive method With low LOD of about 0.073 ppm, 67% recovery
obtained when decomposing dichlorvos by persulfate- sulfuric acid, this method is a
promising approach in determining OPs and studying kinetics of OPs treatment
process
Xác ñịnh thuốc trừ sâu cơ photpho bằng phương pháp xanh molybden
Nguyễn Hoài Thu K53 TT
Giáo viên hướng dẫn: PGS.TS Tạ Thị Thảo
Thuốc trừ sâu cơ photpho (OPs) ñược sử dụng rộng rãi trong nông nghiệp ñể
diệt trừ sâu hại giúp tăng năng suất cây trồng Loại hóa chất này ñem lại lợi ích thiết
thực cho ngành trồng trọt nhưng cũng tiềm ẩn nhiều nguy cơ ñối với môi trường sống
bởi các tồn dư trong sản phẩm nông nghiệp, ñất, nước và không khí Tuy OPs dễ dàng
bị thủy phân làm giảm ñộc tính và hợp chất cơ photpho kém bền hơn hợp chất cơ clo
nhưng OPs là chất ñộc thần kinh mạnh ñối với người và ñộng vật Hiện nay, nhiều
phương pháp ñược sử dụng ñể phân tích tồn dư thuốc trừ sâu, trong ñó phương pháp
xanh molybden thể hiện các ñặc tính ưu việt như: không tốn kém, ñơn giản và ñộ nhạy
cao Với giới hạn phát hiện khoảng 0.073 ppm, ñộ thu hồi khoảng 67% khi phá mẫu
bằng hỗn hợp persulfate- axit sunfuric, ñây là một hướng ñi hợp lý ñể xác ñịnh hợp
chất cơ photpho cũng như nghiên cứu ñộng học của quá trình xử lí hợp chất cơ phot
pho trong thời gian tới
19 Synthesis of nanosized cuprous oxide ans application of nano-sized coprous
oxide thin film
Pham Van Thuan, Class: K53 Advanced Chemistry, 2011-2012
Advisor: Assoc Prof Dr Trieu Thi Nguyet & M.A Nguyen Thi Lua
Nanotechnology is the study of the controlling of matter on an atomic and
molecular scale Generally nanotechnology deals with structures sized between 1 to
100 nanometer in at least one dimension, and involves developing materials or devices
within that size And cuprous oxide (Cu2O) is one of the nanomaterials we research
www.chemvnu.edu.vn