Total Quality Management in Apparel Industry of Bangladesh

Topic: Total Quality Management in Apparel Industry of Bangladesh... Total quality management TQM managing process of good quality.. Introduction: Total Quality Management is a structur

Topic: Total Quality Management in Apparel Industry of Bangladesh

Total quality management (TQM) managing process of good quality Though this way, a good quality product is find out Plan, do, check and acts are major principle In this system, a quality management is control These are explain, we would understand that plan is meaning that how can plan so that this is not prevent or backward in this plan Do is meaning that plan

is right or wrong Check is meaning that this plan or do is exam Acts is meaning that total work is right or wrong At this we understand that in this system, we can achieve for good quality management In good management, every fault will get published and good quality product will get Managing plan is very good and organization will grow up quickly with good quality products or service

Introduction:

Total Quality Management is a structured system for managing the quality of products Quality means customer needs is to be satisfied It helps the customers to get quality products

or goods At this the customer is satisfied Customer always wants new products or goods through the processes of design, specification, controlled manufacture and sale

There are a number of factors on which quality fitness of garment industry is based such as -performance, reliability, durability, visual and perceived quality of the garment Quality needs to be defined in terms of a particular framework of cost

Garment industry collected raw materials for final finished garment For textile and apparel industry product quality is calculated in terms of quality and standard of fibers, yarns, fabric construction, color fastness, surface designs and the final finished garment products

1.Literature review:

[1Asked “what is quality?” one of our students replied “getting what you pay for.” Another student added that to her, quality was “getting more than you paid for.” The oxford American dictionary defines quality as “a degree or level of excellence” Obviously quality can be defined in many ways, depending on who is defining it and to what product or service it is acceptable.] [2To some people, quality is goodness or luxury To other, quality is durability, beauty, labels or high prices Clearly, consumers rely on a wide variety of cause to determine whether products meet their quality standers.] [3To confront the challengers the apparel industry could integrate by way of major technology breakthroughs So what quality details should you look for? The list can be lengthy but begin with this simple way.]

2.Meaning of quality:

[4Quality means customer needs is to be satisfied Failure to maintain an adequate quality standard can be unsuccessful But maintaining an adequate standard of quality also costs effort From the first investigation to find out what the potential customer for a new product really wants, through the processes of design, specification, controlled manufacture and sale

There are a number of factors on which quality fitness of garment industry is based such as -performance, reliability, durability, visual and perceived quality of the garment Quality needs to be defined in terms of a particular framework of cost

Objectives:

I To maximize the production of goods within the specified tolerances correctly the first time

II To achieve a satisfactory design of the fabric or garment in relation to the level of choice in design, styles, colors, suitability of components and fitness of product for the market.]

3.Dimension of quality management:

The dimension of quality for a service differs somewhat for those of a manufactured product There are discussed following below These are

[5Time and timelines: How long must a customer wait for service and is it completed on

time? For example, is an overnight package delivered overnight?

Completeness: Is everything the customer asked for provided? For example, is a mail order

from a catalogue company complete when delivered?

Consistency: Is the same label of service provided to each customer each time? Is your

newspaper delivered on time every morning?]

4.Quality Management System Evaluation:

[6The rising sub-contracting issues and improper quality processes are bringing more obstacles to improving transparency and more reliable production processes

As an accredited third-party service provider, we offer independent evaluation that helps your garment manufacturers to develop a quality management system that meets international standards and best practices

Our QMS audit standard and scheme were developed through long-term collaborations with leading players in the global textile and apparel markets.]

5.Quality Management Assurance for the Retailers:

[7Retailers sell a variety of consumer products and rely on their suppliers to provide them quality products However, retailers must have some way of verifying that they are receiving products at quality levels they planned or specified Retailers also should be able to specify quality levels, if necessary This book outlines various approaches available to retailers to assure product quality The book also covers other important topics like product safety, product testing, end item inspection, product recalls, product liability, standards and specifications, supplier quality system evaluation, supplier rating, supplier partnership, customer returns and customer satisfaction

6.Principle of total quality management:

The Quality System Requirements are based on the principle of PDCA Cycle

6.A.Process Cycle:

1 Understanding the customers' quality requirements

2 Organizing & training quality control department

3 Ensuring proper flow of quality requirements to the QC department

4 Ensuring proper flow of quality requirements to the Production Department

5 Establishing quality plans, parameters, inspection systems, frequency, sampling techniques, etc

6 Inspection, testing, measurements as per plan

7 Record deviations

8 Feed back to Production Department

9 Plan for further improvement

6.B.Establishing the Quality Requirements:

The first step for quality control is to understand, establish & accept the customers' quality requirements This involves the following steps

1 Getting customers specifications regarding the quality

2 Referring our past performance

3 Discussing with the Quality Control Department

4 Discussing with the Production Department

5 Giving the Feed Back to the customers

6 Receiving the revised quality requirements from the customers

7 Accepting the quality parameters

7.Quality Management control:

It becomes necessary to maintain the quality right from the production stage in order to deliver a satisfactory final product to the consumer with the right quality which in turn results

in getting continuous orders from the same customers

8.Importance of Quality Management Control :

Garment industry has a complex supply chain where garment makers source materials, stitch garments and sell goods to retailers Through buyers and retailers quality garments reach to end user located all over the world No wearers will buy a garment with poor quality and visible defects So buyers and retailer knowingly do not purchase a product that does not meet the quality requirement Quality conscious buyers have a strong quality inspection system in place to avoid purchasing of defective goods

 Factory may lose customers (buyers) as well as Brand Value

 Low motivated employees

 Need to work for extra hours

 Ultimately production cost will increase ]

9.Kind of quality management control:

Quality is very important to buyer or user and it is increasing day by day Mainly two

processes are followed to control quality

1 Testing &

2 Inspection.

Inspection in reference to the apparel industry can be defined as the visual examination or review of raw materials (like fabric, sewing threads, buttons, trims, etc)

9.A.Quality Inspection System:

[8There are four systems to justify the quality of garments/fabric They are given below:

1 4 point system

2 10 point system

3 Graniteville “78″ system

4 Dallas system

But among them four point system is widely used In our previous article we have discussed about 4 point system

Process of Garment Inspection System:

Confirmation of Quantity

↓ Confirmation of accessories

↓ Size spec inspection

↓

in side Inspection

↓ Outside Inspection

↓ Final Inspection

↓ Packing ]

9.B.Various Steps of Inspection & Quality Control:

The following levels are discussed at the Garment Making Department assuming that this department is receiving the ready to cut dyed & finished fabrics from the Dyeing & Finishing Department

9.B.(1)Before or Pre-production Inspection:

The following parameters & defects are checked prior to cutting

 Shade Matching

 Fabric Construction

 Fabric Holes

 Vertical & Horizontal Stripes

 Knitting defects such as missing loops

 Softness

 Shrinkage

 Matching of Rib, Collars & Cuffs

 Yarn defects such as thick & thin

 Dirt’s & Stains

 GSM (grams per square meter)

 Dyeing Levelness

9.B.(2)During Production Inspection:

 Fabric defects

 Collars & Cuffs matching

 Stitching defects

 Sewing threads matching

 Dirt’s & Stains

 Measurements

 cutting patterns

 Cutting shapes

 Trims & Accessories

 Labels

9.C.Before Production Inspection:

Many of the important parameters of Pre-productions, During productions & Final inspection parameters This is to ensure that wrong or major defective garments are not packed

9.C(1)PACKING & ASSORTMENT

 Wrong Quantity

 Missing labels & tags

 Wrong Size & Color assortment

 Wrong Folding

9.C(2) FABRIC DEFECTS

 Uneven dyeing

 Wrong Shade

 Thick & Thin places

 Dirt & Stains

 Oil stains

 Poor softness

 Higher Shrinkage

9.C(3) SEWING DEFECTS

 Needle holes & marks

 Unbalanced sleeve edge

 Unbalanced placket

 Puckering

 Incorrect side shape

 Broken & Missing stitch

 Poor Ironing

 Bottom hem bowing

 Uneven neck shape

9.C(4) MEASUREMENT PROBLEM

Compare the garment measurements against the Customers' Measurement Charts

Following are the some of the important garments' measurement aspects to be considered

1 Garment length

2 Body width

3 Shoulder length

4 Arm hole

5 Arm Opening

6 Sleeve length

7 Placket length

8 Placket width

9 Neck width

10 Neck opening

11 Hemming width

12 Rib or Collar width

9.C(5) GENERAL DEFECTS

1 Shade variation within the garment parts

2 Shade variation between the garments

3 Defective printing

4 Defective embroidery

5 Defective buttons

10.Quality details in apparel:

[9There are following discuss about quality apparel These are…

1 Fabric is the basic foundation of apparel Fabric is woven by yarns which run up –and down or across When apparel is cut from the fabric.it should run up-down and across Sometimes apparel is not correctly, and actually causes clothing to twist around body This is called off-greensand cannot be corrected Off-grain apparel is result of quality control during the manufacturing process

2 Manufactures sometimes use bias cut section cut costs Bias cut apparel is exceptionally difficult to sew, tends to stretch out of shape Hang unevenly at the hem, or sag, compromising quality

3 Patterned fabrics should match along seemliness in both directions, across and up-and-down Aching indicates quality because of the additional fabric and labor involved in cutting and sewing

4 Colors should match between pieces and is not indictor of quality Fabric, thread, zipper, even elastic should match, function and be durable Manufacturers know the performances characteristics of each fabric and should base decagons on how well these pieces perform in accordance with the fabric

5 Seams within a garment should be securely sewn Check to make sure threads have not popped or ruptured along all seams Seams with surging are more secure and higher quality

as long as the correct tension was used when sewn Just be sure you tag along a seam to see if

it has enough tension to resist popping

6 Design features within apparel can also help you judge quality

7 Collars should be smooth as they lay against the body- corners should not roll or pucker and each end of the collar the same length and shape

8 Buttons should pass through the button the buttonhole, and be securely sewn to the fabric

9 Hook and loop tape should be securely sewn The coarser the hooks and loops are, the better the holding power of the tape Be sure to lock the tape together before laundering to prevent damage to other apparel in the wash load.do not iron

10 Fit of the garment to the wearer is the final indicator of a quality to the wearer is the final indicator of a quality decision Alterations if needed can be an additional expense Be sure to check the fit by sitting, working and bending with the garment on the body If you have to pull or tug at any area of a garment after moving, sitting or bending, the garment is improperly sized for the wearer Check the mirror looking at the front side and back for horizontal wrinkles in the garments There are no standard sizes in apparel sizes vary be style.]

11.The cost of achieving good quality Management:

[10 The cost of quality management program is prevention cost and appraisal costs

Prevention costs are the costs of trying to prevent poor quality products from reaching the customer Example of prevention costs include:

Quality planning costs: The costs of developing and implementing the quality management

program

Product design costs: The costs of designing products with quality characteristics.

Process costs: The cost expended to make sure the productive process conforms to quality

specification

Training costs: The costs of developing and putting on quality training programs for

employees and management

Information costs: The costs of acquiring and maintaining data related to quality and the

development and analysis of reports on quality performance.]

Conclusion:

Wants, wants and more wants, every person say Every person wants quality products or services For this, more company is ready to give quality product or service If you want to see your company, you need to give quality product At this the company will stay more days If good quality products do not give, the company will lost The managing quality control gives always good quality product or service Though total quality management, Good quality products give possible So quality management is not very good, at this quality product or service get So it is very important for apparel industry

1 Operations management(book)/Writer-Roberta s Russell and Bernard W Taylor 111/ page no-79

2 Apparel manufacturing sewn product analysis(book)/Writer- Ruth E Glock and Grace

I Kunz/page no-13

3 Changing trends in apparel industry(book)/Writer-N.S.Kaplan/page no-27-28

4 http://www.fibre2fashion.com/industry-article/8/800/quality-systems-for-garment-manufacture1.asp

5 Operations management(book)/Writer-Roberta s Russell and Bernard W Taylor 111/ page no-81

6 http://www.sgtgroup.net/pages/service_qe.aspx

7

http://textilelearner.blogspot.com/2011/08/quality-control-system-in-garments_2589.html

8

http://www.garmentsmerchandiser.info/quality-inspection-system-in-garment-industry/

9 Changing trends in apparel industry(book)/Writer-N.S.Kaplan/page no-28-30

10 Operations management(book)/Writer-Roberta s Russell and Bernard W Taylor 111/ page no-99