1. Trang chủ
  2. » Thể loại khác

Smart Home Monitoring and Controlling System Using Android Phone

2 417 0

Đang tải... (xem toàn văn)

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Định dạng
Số trang 2
Dung lượng 314,67 KB

Các công cụ chuyển đổi và chỉnh sửa cho tài liệu này

Nội dung

IJETAE 1113 71 Smart Home Monitoring and Controlling System Using Android Phone Our project describes a zigbee module and android based home monitoring system for security, safety and healthcare for human. The existing system provides security and safety or healthcare system but in my project provide combination of these two systems. This system is more flexible and can be implemented in many research areas. This paper introduces a smart home system which could supervise household appliances remotely and realize realtime monitoring of home security status through mobile phone. This paper mainly focuses on the monitoring and control of smart home remotely and providing security, when the user is away from the place. The personal computer is used to monitor the various parameters in the proposed system. In this system android phone is used to monitor and control the various parameters. Android phone is main advantage compared to personal computer for using any place. To monitor the various parameter using zigbee, that has viewed by lab view and then controlled using android phone.

Trang 1

International Journal of Emerging Technology and Advanced Engineering Website: www.ijetae.com ( ISSN 2250-2459, ISO 9001:2008 Certified Journal, Volume 3, Issue 11, November 2013)

426

Smart Home Monitoring and Controlling System Using

Android Phone

Gowthami.T1, Dr Adiline macriga G2

1

PG Student, ME Computer and Communication, Sri Sairam Engineering College, Chennai-44

2 Professor, Department of IT, Sri Sairam Engineering College, Chennai-44

Abstract – Our project describes a zigbee module and

android based home monitoring system for security, safety

and healthcare for human The existing system provides

security and safety or healthcare system but in my project

provide combination of these two systems This system is more

flexible and can be implemented in many research areas This

paper introduces a smart home system which could supervise

household appliances remotely and realize real-time

monitoring of home security status through mobile phone

This paper mainly focuses on the monitoring and control of

smart home remotely and providing security, when the user is

away from the place The personal computer is used to

monitor the various parameters in the proposed system In

this system android phone is used to monitor and control the

various parameters Android phone is main advantage

compared to personal computer for using any place To

monitor the various parameter using zigbee, that has viewed

by lab view and then controlled using android phone

Key word – Home automation, Zigbee, Android phone

I INTRODUCTION

Home automation is become more advantageous for

safety, security An embedded board physically connected

all home automation devices and through integration with a

personal computer (PC) based web server, provided remote

access to the system We are going to use these wireless

sensors for home monitoring

Nowadays, home automation became more modern and

precise to monitor the fields There are so many challenges

in the modern home automation such as Temperature, gas,

light, fan, obstacles and human healthcare for smart home

This paper concentrates smart home monitoring using

sensors

The physical parameters such as temperature and gas for

the kitchen, Light and Fan for the bed room, obstacle

sensor used as some important places and the human

healthcare should be closely monitored For this there are

three sensors are used Using embedded c and lab view

programming part has been done

II RELATED WORK

Physical Parameters of the home are sensed by data acquisition system Data acquisition has been done using sensor nodes A node contains three sensors The sensors are used for monitoring the physical parameter measurements In the home monitoring, the parameters such as kitchen temperature, gas and obstacle are monitored

These parameter measurements are gathered and processed using digital signal processing In digital signal processing, the analog signals generated from the sensor nodes are converted into digital signals

Again the digital signals are converted into analog signal The analog signals from various sensor nodes are transmitted to the local home monitoring server using zigbee From the local server the data has been sent to the remote view through the network interface The general structure of the sensor node is given in figure 1

Fig 1 General Structure

III PROPOSED WORK

A Local Monitoring Server

The sensor node is responsible for gathering, processing and transmitting the measurement data periodically to the local home monitoring server with embedded web support The architecture of the local server module is given in figure 2

Trang 2

International Journal of Emerging Technology and Advanced Engineering Website: www.ijetae.com ( ISSN 2250-2459, ISO 9001:2008 Certified Journal, Volume 3, Issue 11, November 2013)

427

Figure 2 Local Monitoring Server

B Remote View using Android

The local monitoring server sends the home appliances

output using graphical user interface Wi-Fi network is

used us the communication between local monitoring

server and android device The architecture of remote view

using android module is given in figure 3

Figure 3 Remote View using Android

IV IMPLEMENTATION

A.Temperature

For the temperature the LM35 sensor is used It has an

output voltage that is proportional to the Celsius

temperature It has low self heating capability, suitable for

remote applications, low cost due to wafer level trimming,

operates from 4 to 30v, low impedance output

B Gas

This is the simple to use liquefied petroleum gas (LPG)

sensor, suitable for sensing LPG concentrations in the air

The MQ6 can detect gas concentrations for anywhere for

200 to 10000ppm

The sensor has the high sensitivity and fast response

time The sensor’s output is an analog resistance, so

connect output to ADC

C Obstacle

The gp2d12 is used for measuring the human movement The gp2d12 is a distance measuring sensor with integrated signal processing and analog voltage output The small and rather inexpensive infrared device is able to measure distance between 10cm to 80cm

F Wireless transmission using embedded gateway

The above parameters are gathered and processed by microcontroller and transmitted to local monitoring server These outputs are monitored in any other places for using android portable devices

V CONCLUSION AND FUTURE WORK

In the future all electrical appliances and human body health condition should be involved and this has successfully monitored and controlled using lab view REFERENCES

[1] Peizhao Hu, N.Symons, J.Indulska, M.Portmann,”Share you View:Wireless Multi-Hop Video Streaming using Android Phones”,IEEE International Conference on Pervasive Computing and Communications Workshops(PERCOM Workshops),Page(s) 782-787,Year 2012

[2] Elmurod Talipov,Yohan Chon,and Hojung Cha, “Content Sharing Over Smartphone-based Delay-tolerant Networks”,IEEE Transaction

on Mobile Computing,Page(s) 1-14,Year 2012

[3] T.G.C.Kooh,Qin Lv,S.Mishra,”Attribute Based Content Sharing in Mobile Adhoc Networks of Smartphones over Wifi”,IEEE 21st International Conference on Computer Communications and Networks(ICCCN),Page(s) 1-9,Year 2012

[4] N K Suryadevara and S C Mukhopadhyay,” Wireless Sensor Network Based Home Monitoring System for Wellness Determination of Elderly”,in proc.IEEE Recent Adv.Intell comput Syst., june.2012,pp 1-8

[5] N K Suryadevara and S C Mukhopadhyay, “Wireless sensors network based safe home to care elderly people: A realistic approach,” in Proc IEEE Recent Adv Intell Comput Syst., Sep

2011, pp 1–5

[6] A.M.F.Garcia,A.P.Esteban,”Reusing Educational Contents in M-Learning”,IEEE International Conference on Advanced Learning Technologies(ICALT),Page(s) 448-449,Year 2011

[7] Eun-Sung Kim,Yu-Seok Lee,Wang-Cheol Song,”Content Sharing Application in Mobile PC Browser Based on JXTA”,IEEE Transaction on Mobile Technology”,Page(s) 993-996,Year 2011 [8] A A Moshaddique and K Kyung-Sup, “Social issues in wireless sensor networks with healthcare perspective,” Int Arab J Inf Technol., vol 8, no 1, pp 34–39, Jan 2011

[9] D Mark, J Nutting, J LaMarche: “Beginning iPhone Development: Exploring the iOS SDK,” 1st ed., pp 92-276, January 2011 [10] T Obo, N Kubota, K Taniguchi and T Sawaya, Human Localization Based on Spiking Neural Network in Intelligent Sensor Networks, Proc of IEEE SSCI-RiiSS 2011, pp 125-130, 2011

Ngày đăng: 02/09/2014, 07:02

TỪ KHÓA LIÊN QUAN

🧩 Sản phẩm bạn có thể quan tâm