“Standard Specification for Steel for Bridges and Buildings,” Philadelphia, PA.. “Specification for Steel for Bridges and Buildings,” Philadelphia, PA.. “Tentative Specifications for Ste
Trang 1ASTM A7-50T
American Society for Testing and Materials “Standard Specification for Steel for Bridges and Buildings,” Philadelphia, PA
ASTM A7-67
American Society for Testing and Materials “Specification for Steel for Bridges and Buildings,” Philadelphia, PA
ASTM A9-33T
American Society for Testing and Materials “Tentative Specifications for Steel for Buildings,” Philadelphia,
PA
ASTM A36-60T
American Society for Testing and Materials “Tentative Specification for Structural Steel,” Philadelphia, PA
ASTM A94-25T
American Society for Testing and Materials “Tentative Specifications for Structural Silicon Steel,” Philadelphia, PA
ASTM A140
American Society for Testing and Materials “Specification for Steel for Bridges and Buildings,” Philadelphia,
PA
ASTM A141
American Society for Testing and Materials “Tentative Specifications for Structural Rivet Steel,” Philadelphia, PA
ASTM A195-36T
American Society for Testing and Materials “Tentative Specifications for High-Strength Structural Rivet Steel,” Philadelphia, PA
ASTM A373-58T
American Society for Testing and Materials “Tentative Specification for Structural Steel for Welding,” Philadelphia, PA
ASTM A502
American Society for Testing and Materials “Standard Specification for Steel Structural Rivets,” Philadelphia, PA
ASTM A588/A588M
American Society for Testing and Materials “Specification for High-Strength Low-Alloy Structural Steel with
50 KSI [345 Mpa] Minimum Yield Point to 4 in [100 mm] Thick,” Philadelphia, PA
ASTM A898/A898M
American Society for Testing and Materials “Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes,” Philadelphia, PA
ASTM E140
American Society for Testing and Materials “Hardness Conversion Tables for Metals,” Philadelphia, PA
Trang 2Barsom and Rolfe 1987
Barsom, J M., and Rolfe, S T 1987 Fracture and fatigue control in structures Prentice-Hall, Englewood
Cliffs, NJ
Birk 1989
Birk, J D 1989 “Economic Feasibility of a Tool to Remove Rivets from Railway Bridges,” REU report, ATLSS Engineering Research Center, Bethlehem, PA
Bower et al 1992
Bower, J E., Kaczinski, M R., Ma, Z., Zhou, Y., Wood, J D., and Yen, B T 1992 “Structural Evaluation
of Riveted Spillway Gates,” ATLSS Report No 92-12, Lehigh University, Bethlehem, PA
Commander et al 1994
Commander, B C., Schulz, J X., Goble, G G., and Chasten, C P 1994 “Field Testing and Structural Analysis of Vertical Lift Lock Gates,” Technical Report REMR-CS-44, U.S Army Engineer Waterways Experiment Station, Vicksburg, MS
Ewins 1985
Ewins, D J 1985 “Hammer or Impactor Excitation,” Modal Testing: Theory and Practice, Research Studies
Press, Ltd (A Division of John Wiley & Sons), Letchworth, Hertfordshire, England
Fazio and Fazio 1984
Fazio, R N., and Fazio, A E 1984 “Rivet Replacement Criteria,” Second Bridge Engineering Conference,
Volume 1, TRR 950, Transportation Research Board, Washington, DC
Ferris 1953
Ferris, H W., ed 1953 “Iron and Steel Beams 1873 to 1952,” American Institute of Steel Construction, Chicago, IL
Fisher 1977
Fisher, J W 1977 “Bridge Fatigue Guide Design and Details,” American Institute of Steel Construction, Chicago, IL
Fisher 1984
Fisher, J W 1984 Fatigue and Fracture in Steel Bridges, John Wiley & Sons, New York
Fisher et al 1979
Fisher, J W., Hausamann, H., Sullivan, M D., and Pense, A W 1979 “Detection and Repair of Fatigue Damage in Welded Highway Bridges,” National Cooperative Highway Research Program (NCHRP) Report
206, Transportation Research Board, Washington, DC
Fisher et al 1987
Fisher, J W., Yen, B T., Wang, D., and Mann, J E 1987 “Fatigue and Fracture Evaluation for Rating Riveted Bridges,” National Cooperative Highway Research Program (NCHRP) Report 302, Transportation Research Board, Washington, DC
Frank and Fisher 1979
Frank, K H., and Fisher, J W 1979 “Fatigue Strength of Fillet Welded Cruciform Joints,” Journal of the
Structural Division, ASCE, Vol 105, No ST9, pp 1727-1740
Trang 3Kayser and Nowak 1987
Kayser, J R., and Nowak, A S 1987 “Evaluation of Corroded Steel Bridges,” Bridges and Transmission
Line Structures, American Society of Civil Engineers, New York, 35-46
Kayser and Nowak 1989
Kayser, J R., and Nowak, A S 1989 “Reliability of Corroded Steel Bridges,” Structural Safety, Vol 6
Elsevier Science Publishers, New York, 53-63
Keating 1994
Keating, P B 1994 “Focusing on Fatigue,” Civil Engineering, November 1994, 54-57
Mlakar et al 1989
Mlakar, P F., Toussi, S., Kearney, F.W., and White, D 1989 “Reliability of Steel Civil Works Structures,” Technical Report REMR-CS-24, U.S Army Construction Engineering Research Laboratory, Champaign, IL
Pisigan and Singley 1985
Pisigan, F A., and Singley, J E 1985 “Evaluation of Water Corrosivity Using the Langelier Index and
Relative Corrosion Rate Models,” Materials Performance Journal, April, 26-36
Slater 1987
Slater, J E 1987 “Corrosion in Structures,” Metals Handbook, 9th ed., ASM International, Metals Park, OH,
13, 1229-1310
Stout and Doty 1953
Stout, R D., and Doty, W D 1953 Weldability of Steels, 1st ed., Welding Research Council, New York
Stout et al 1987
Stout, R D., and contributing authors Ott, C W., Pense, A W., Snyder, D J., Somers, B R., and Somers,
R E 1987 Weldability of Steels, 4th ed., Welding Research Council, New York
Tada, Paris, and Irwin 1985
Tada, H., Paris, P C., and Irwin, G R 1985 The Stress Analysis of Cracks Handbook, Paris Productions,
Inc., Saint Louis, MO