The Camera Raw Panel Menu The Camera Raw panel menu is accessed by clicking the Panel Menu icon under the Image Adjustment tabs as shown in Figure 7.9.. In this menu, you have the follow
Trang 1l Automatically open all supported JPEGs/TIFFs: This automatically opens supported
JPEGs and TIFFs in Camera Raw before opening them in Photoshop You can make tonal and color changes faster in Camera Raw than in Photoshop, but you don’t have the tonal range that you do with a raw image These changes are permanent and destructive to a JPEG or TIFF file
The Camera Raw Panel Menu
The Camera Raw panel menu is accessed by clicking the Panel Menu icon under the Image Adjustment tabs as shown in Figure 7.9 In this menu, you have the following options:
FIGURE 7.9
The Camera Raw panel menu
Panel menu icon
l Image Settings: This option applies to images that you have previously opened and
changed in Camera Raw A check mark next to it indicates previous settings After making additional changes, you can select this option to return to those settings
l Camera Raw Defaults: If your image is newly opened in Camera Raw, this option is
selected You can click it at any time to return to the original camera raw settings
l Previous Conversion: This option applies the settings used for the last image open in
Camera Raw to the current image This is handy if you have photos that were taken at the same time with the same camera in the same lighting conditions
l Custom Settings: After you make changes to an open image, the Custom Settings option
is checked This allows you to check the original image by selecting Camera Raw defaults
or Image Settings and then returning to the changed image by clicking Custom Settings
l Preset Settings: This option displays any Presets you have applied to your image.
Trang 2image If you apply more than one preset, it is added to the previous preset(s) unless it falls into the same category For instance, applying Clarity +15 to Exposure +25 sets both Clarity and Exposure to those values Applying Clarity +15 to Clarity +25 simply reduces the clarity from +25 to +15
l Apply Snapshot: This option allows you to load any snapshots you have taken in the
Snapshot panel I show you how to do this later in this chapter
l Clear Imported Settings: This option allows other applications that use Camera Raw,
such as Photoshop Elements, to clear the settings created using Photoshop Because fewer options are available to users of Photoshop Elements, this clears settings that these users have no access to and can’t modify
l Export Settings to XMP: You can export the current settings to the XMP file by clicking
this option This is only a temporary save, however When you click Done or Open Image, these settings are overwritten by the current settings You can click Cancel, however, and these settings become the saved default
l Update DNG Previews: This option allows you update the JPEG previews in your DNG
file You also can set the size of these previews If you’ve set your preferences to update these previews, they are updated when you close or export your image
l Load Settings: This option allows you to load a saved setting.
l Save Settings: This option allows you to save your settings as a preset A dialog box opens
that gives you the option to select or deselect each setting individually to save in your pre-set The preset is saved as a XMP file in the location of your choice The Preset panel allows you to save and load your setting easily Learn more about it later in this chapter
l Save New Camera Raw Defaults: Choose this option to save your current settings as the
Camera Raw defaults This gives you the power to change default settings that you may not like, such as automatic sharpening
l Reset Camera Raw Defaults: This option resets the defaults to the original Camera
Raw settings
Creating Snapshots
As you make changes to your images in Camera Raw, you may want to save several versions of those changes For instance, you may want to save the original image and the special effect you created with it Using the Snapshots panel, you can create and save different versions of your image that are saved as metadata and are always accessible
Click the Snapshots Image adjustment tab to open the Snapshots panel, as shown in Figure 7.10
There’s not much here, just an empty panel with a New Snapshot and Delete icon at the bottom
Before you create a Snapshot, you should change the settings of your image You learn more about that in Chapter 8, but for now you can either take a snapshot from the default settings or make some simple changes before you do
Trang 3FIGURE 7.10
The Snapshot panel isn’t much until you add to it
Snapshot icon
To create a snapshot, click the New Snapshot icon at the bottom of the Snapshot panel A dialog box opens allowing you to name the snapshot you’ve just created After you name it and click OK, the dialog box closes and the Snapshot name appears in the Snapshot panel, as shown in Figure 7.11 You can continue to create as many snapshots as you need
On the Web Site
You can access Figure 7-11 with the saved snapshots on the book’s Web site n
You can access these snapshots at any time by simply clicking the name in the Snapshot panel
When you are finished in Camera Raw, the snapshot that is selected is the exported image
Trang 4After you’ve added one or more snapshots, you can return to their settings by selecting them in the
Snapshots panel
New Snapshot
Saving Presets
As you adjust the settings in Camera Raw, keep in mind that they can be used on more than just the image you are adjusting You can save them as presets and use Bridge to apply them to other images You also can apply them to other images within Camera Raw
Open the Preset panel by clicking the Preset tab Just like the Snapshot panel, the Preset panel is pretty bare until you add your own presets to it Click the Add New Preset icon on the bottom
of the Preset panel The dialog box shown in Figure 7.12 opens, giving you the option to choose which settings will be saved in the new preset You also can name your preset so you can find
it easily
Trang 5FIGURE 7.12
You can choose which settings will be changed to create a preset
After you have created a preset, you can change your settings to match it by highlighting it in the Preset panel You also can access them in Bridge by choosing Edit ➪ Develop Settings and selecting
a preset The setting is adjusted for all selected images
Exporting Camera Raw Files
When you are finished with your image in Camera Raw, you have several options for exporting it
Using the buttons at the bottom of the screen, as shown in Figure 7.13, you can open your image
in Photoshop, cancel your changes and close your image, or click Done to close your image with the new settings saved
Note
If you have selected “Open in Photoshop as Smart Objects” in your Workflow Options, the Open button reads
“Open Object(s)” rather than “Open Image(s)” n
Trang 6FIGURE 7.13
Export your document using one of these three buttons or the Save Image button
You also have several options when you click the Save Image button and open the Save Options dialog box, as shown in Figure 7.14 Camera raw formats are large, unwieldy, and generally not accepted for printing or sharing on the Web In order to make your camera raw files share-friendly, you need to save them as a more accepted file format, generally JPEG You also can con-vert your files to DNGs, TIFFs, or PSDs
FIGURE 7.14
The Save Options dialog box
l Destination: First, you can choose to save your files in the same location from which you
opened them, or you can choose a new location in which to save them
l File Naming: You have several options when it comes to naming your file or multiple
files The batch saving options allow you to name your files in a specified sequence You can also choose a new file format to save your file
Trang 7l Batch saving options: You have several batch saving options; I’ve chosen a few of
these options in Figure 7.14 as an example If you have several photos open in Camera Raw, you can change their filenames and save them in sequence using these options
l File Extension: Using the File Format drop-down menu, you can save your file as a
DNG, JPEG, TIFF, or PSD file (and choose whether the extension appears in caps or not) You should know the pros and cons of each by now
l Format: This is automatically chosen when you choose your file extension, or vice versa
The option you choose here changes the dialog box to display the options for each file format
After you are finished setting your options, click Save and your file is saved according to your settings This does not replace your original camera raw file, of course; it creates a new file
Summary
By this time, you should have a really good basic idea of why camera raw formats have become so popular and why it is important to have a non-proprietary format to save these files in In addition, you should know quite a bit about the Camera Raw workspace including the following:
l Where the tools and menus are found and how to access them
l How to set your workflow options and preferences
l How to create several different snapshots of your image settings
l How to open your images in Photoshop or export them as different file types