Photoshop cs5 cho nhiếp ảnh gia part 59 pps

Once the mesh is saved, open your full-sized file, choose filter > Liquify, and click Load Mesh.. For Photoshop Elements Users: Liquify The Elements Liquify filter is quite similar to th

Reconstruct Mode Offers additional choices for ways to reconstruct the image some

are similar to those offered in the reconstruction Options section, while others are

in addition to those options if you just want to return to the original state, choose

revert the other options create further distortions

Reconstruct Options these options allow you, with the reconstruct tool selected, to

spec-ify a mode for the reconstruction, which can either create further distortions or revert

to the original image

When you have achieved the desired effect, if you’re working on a full- resolution image, you can simply click Ok to apply your work to the picture if you are using a

small-file version of your image as we suggested at the start of this section, click save

Mesh another dialog box appears in which you can name the effect and specify where

to save it (see figure 9.23)

Figure 9.23 After you are satisfied with the effect, save the mesh to apply

to your full-sized file

Once the mesh is saved, open your full-sized file, choose filter > Liquify, and click Load Mesh Choose the mesh you just saved, and click Ok to perform the

distor-tion if you are feeling adventurous, apply a saved mesh to an unrelated

image—some-times serendipity comes into play, and you create something unexpected but wonderful!

For Photoshop Elements Users: Liquify

The Elements Liquify filter is quite similar to the one in Photoshop Access it from Filter > Dis-tort > Liquify The Elements version lacks Freeze and Thaw tools, but has specific tools for Twirl Counterclockwise and Reflection Elements does not have options for Brush Density, Brush Rate,

or Reconstruction In addition, you cannot save the mesh to apply on other images

.com/go/photoshopnature, or open one of your own images, and see what you can create with it Be sure to vary the settings and tools to get different effects

Using the Filter Gallery

recent versions of Photoshop (Cs and newer, as well as elements) contain a filter

gal-lery (filter > filter Gallery) rather than just a simple list of individual filters this gallery

enables you to preview the effects of a variety of filters, as well as to preview the effects

For Photoshop Elements Users: Liquify

The Elements Liquify filter is quite similar to the one in Photoshop Access it from Filter > Dis-tort> Liquify The Elements version lacks Freeze and Thaw tools, but has specific tools for Twirl Counterclockwise and Reflection Elements does not have options for Brush Density, Brush Rate,

or Reconstruction In addition, you cannot save the mesh to apply on other images

of combining them and reordering them this saves a lot of time as you experiment with different effects, but unfortunately, it works only on 8-bit images the good news is that you can use it as a regular filter or as a smart filter on a smart Object layer When it’s used as a smart filter, you can go back and modify the filter settings, reorder, and even add and remove effects

We often find that when using filters, one thing leads to another, and pretty soon you may have created something you love but perhaps couldn’t have imagined ahead of time the more you experiment with these filters, the more predictable they will become for you

the filter Gallery contains thumbnails that give you an idea of each effect as shown in figure 9.24, this dialog box also previews the various effects and settings

on your image You can vary the settings, combine filters, vary the order (which can substantially change their effect), and even repeat filters the filters are applied in the order you select them, but you can drag the filter name to a different position to reor-der them to select an effect, click the corresponding thumbnail if you want to add

an additional effect, alt/Option-click each additional filter Clicking the eyeball icon toggles the visibility of the effect

Figure 9.24 We used the Filter Gallery to create a painterly effect by combining the Dry Brush and Diffuse Glow filters.

Before beginning with the filter Gallery, you should take several preparatory steps:

1. Usually when we experiment with filters, we’re using files that have already been optimized to avoid accidentally mucking up an image you’ve already put effort into, work on a copy of the master file by choosing image > Duplicate

2. Close the original file this ensures you won’t accidentally save changes to your

master file, such as flattening it

3. flatten the image by choosing Layer > flatten image

4. Choose image > Mode > 8-Bits/Channel

at the bottom of the Layers panel now you’ll be adding your creative effects on

a layer so that not only are you not damaging your pixels, but you can also later reduce the opacity of the layer or add a layer mask to it to control where the effects are applied

6. if you are using Photoshop Cs3 or Cs4, choose filter > Convert for smart

fil-ters this changes the layer into a smart Object layer

7. Choose filter > filter Gallery

some of the filters we frequently try are Glass (Distort grouping), Dry Brush, Poster edges and rough Pastels (which are in the artistic group), and Water Paper

(sketch group) You will find your own favorites the more you experiment with the

filters However, don’t forget to use the filters that are not part of the filter Gallery as

well they are available from the filter menu on the main menu bar

sometimes the distortion filters can lead to some exciting results, as shown in figure 9.25 this poppy was distorted using polar remapping, then copied and

liqui-fied, and a bit of the original image was returned to complete the effect Pretty wild,

but that’s what happens when you let your imagination go along with the filters in

Photoshop!

Figure 9.25 This rather boring picture of a poppy was transformed into a fantasy image using a variety of Photoshop

filters, along with a little imagination

Additional Filter Effects

Quite a few software companies, such as Flaming Pear (www.flamingpear.com), Topaz Labs (www.topazlabs.com), Lucis (www.lucispro.com), and Nik Software (www.niksoftware com) have produced filter effect plug-ins for Photoshop Many of these can lead to interest-ing effects with very little effort We find that we use Nik Software’s Color Efex Pro on a large number of our images to emulate numerous camera tools such as a reflector, split ND filter, and more, as well as to add creative effects For example, Ellen used it to create the back-ground colors for these water droplets (For a discount on this software, at www.niksoftare com use the promo code EAnon.)

nikon “Legend Behind the Lens” tony sweet (www.tonysweet.com) is one of the most creative photographers we know We asked him to share one of his approaches for increasing the impact of an image using Lucis Pro

Being Creative with Plug-ins

by Tony Sweet

Lucis Pro is a Photoshop plug-in that enables the user to optimize an image using simple con-trols/sliders with unlimited combinations of settings

I use it mostly to bring out detail in an image, using exclusively the Enhance Detail slider But occasionally, and depending on the image, I’ll go to the other extreme and use multiple itera-tions to render an image that is non-representational In other words, the final image is not obviously a photograph

This image came out flat; not unusual given the fog and flat light, but would be considered quite passable back in the film days by adding an 81-series warming filter To me, this needed

a lot more Lucis Pro, used on this image, is much like painting, where one paints a base layer, then brushes layer upon layer until the painting is completed

P hoto by t ony s wEEt The two main controls in Lucis, Enhance Detail and Smooth Detail, were applied and blended with the previous layer five times (five iterations) The cumulative effect resulted in the final image, which is not readily recognizable as a photograph

.com/go/photoshopnature, or open one of your own images, and experiment with a variety of filters Try different combinations and orders of filters while varying the settings

Digital Montages

Combining shots, or creating “slide sandwiches,” has been a popular film technique for years traditionally, one slide had to be overexposed by about two stops and the other by a single stop to yield an acceptable exposure at best, it’s an approach that requires a lot of trial and error and bracketing

it’s not only possible to emulate these same effects in Photoshop; it’s actually easier to do so! One reason is that we have the flexibility to alter exposures as needed

another reason is that if you didn’t think of using a particular image as part of a mon-tage while you were in the field, it doesn’t matter You can make several versions of the same file in Photoshop and in Photoshop, you can go further and combine numerous images in a variety of ways

Before you begin to make your montages, remove any dust in your images

after all, double the dust means double the cleanup required later! final exposure and color changes are usually best made after creating the montage

Blending Modes

Before proceeding with ways to combine images, you need to have some understand-ing of blendunderstand-ing modes

Back in Chapter 5, you learned about layers recall that in many ways, pixel layers in normal blending mode—which is what we’ve been using—act like prints

Whatever is on top is what you see if you “cut a hole” in the top layer by using a layer mask to partially hide that layer, you see what’s underneath if you reduce the opacity

of the top pixel layer, you see some of the top layer and some of the layer beneath it in normal mode, the layers blend together in an intuitive way

However, Photoshop at its core is a series of mathematical algorithms, and there

are other instructions (algorithms) for how to blend two layers these are called blend­

ing modes Photoshop Cs5 and elements 8 have 27 blending modes Don’t panic! You

don’t have to memorize what each one does instead, you can simply scroll through the drop-down list in the Layers panel (see figure 9.26) You’ll soon realize that the most useful blending modes for photographers are normal, Multiply, screen, Overlay, soft Light, Difference, and Luminosity But sometimes one of the other modes will create magic for you, so don’t hesitate to try them all

each blending mode is a different set of instructions for how to combine two layers if you are more intuitive, don’t worry about fully grasping each algorithm feel free to skip ahead and experiment with using the blending modes in case you are more analytical, we’re providing this explanation

the different blending modes are grouped together in the drop-down list accord-ing to similar functions