Photoshop cs5 cho nhiếp ảnh gia part 40 doc

imagine superimposing the layer mask over your image—the areas underneath white parts of the mask will show the changes you make on that layer, and the areas of the image underneath bla

Targeting Adjustments Using a Layer Mask

one of the reasons for using the tonal adjustments within photoshop in addition to

those you already made in ACr is so that you can apply the changes to only certain

areas of the image You may want to do this to help emphasize your subject or to reveal

detail in areas of your picture that have different lighting doing so requires the use of

a layer mask to target the adjustment to a particular area of the image

Every adjustment layer comes with a layer mask it’s the white box that appears

in the adjustment layer in the layers panel, next to the icon for the type of adjustment

the shape of the mask matches the shape of your image, as shown in Figure 6.10 When

a mask is active, there is a thin box surrounding the mask icon the layer mask in

adjustment layers is active by default

Figure 6.10 Every adjustment layer

automatically comes with a layer mask

think of a layer mask as a visibility control for the changes you make on that

layer By default the mask is white Wherever a layer mask is white corresponds to

areas of your image where the changes made on that layer will be visible Wherever a

layer mask is black corresponds to areas of your image where the changes will not be

visible that’s the key to understanding layer masks imagine superimposing the layer

mask over your image—the areas underneath white parts of the mask will show the

changes you make on that layer, and the areas of the image underneath black parts of

the mask will show no effects of that layer

there are three ways to make parts of the layer mask black that are particularly useful for nature photographers the first is by creating a selection before you make

the adjustment layer, the second is by using the Color range option within the masks

panel, and the third is by painting parts of the layer mask black We’ll talk about all of

these approaches in more detail (since Elements users don’t have a masks panel, they

have only two ways to define a layer mask.)

Note: A layer mask identifies which areas of a particular layer will be visible In this case, we’re

talking about layer masks on adjustment layers, so the mask determines where the adjustment applies and where it doesn’t White on the layer mask indicates areas where the adjustment layer affects the image, and black indicates areas where it does not

Because Cs5 and Elements 8 are nonmodal, you can work on the layer mask at any time while tweaking the adjustments (versions of photoshop prior to Cs4 were modal, which meant that you couldn’t move from an adjustment to something else until you completed the adjustment and clicked ok now there is no need to click ok before moving on to something else instead, you can fluidly move back and forth among the adjustment, the mask, and other tasks.)

the masks panel takes advantage of Cs5 being nonmodal and offer a variety of ways to fine-tune the mask (see Figure 6.11) it functions the same way for all adjust-ment layers By default it’s set to the pixel mask , which is what you’ll want the icon to the right is used to select a vector mask since we rarely (read that as never)

use a vector mask, you don’t have to worry about it!

Figure 6.11 The CS5 Masks panel offers

a number of controls to help create and refine a mask

the density slider controls the opacity of the mask most of the time you’ll begin with 100%, but if you want to tweak the strength of the adjustment you can change this the Feather slider enables you to soften the edges of the adjustment so that it blends more gradually into the rest of the image however, for most of your work you’ll want to use the mask Edge option Click it to access the refine Edges dialog that we covered in Chapter 4, “Foundations.” if you want to invert the mask and have the adjustment affect the opposite parts of the image, click the invert but-ton shortly we’ll provide more detail about using the Color range option to define the mask

Note: To copy a mask from one layer to another, click the mask icon in the Layers panel, hold down

the Alt/Option key, and drag the good mask to the desired layer A dialog will appear asking whether you want to replace the existing mask Choose Yes Use the Invert option in the Masks panel if

neces-sary All masks for all adjustment layers work this way!

For Photoshop Elements Users: Layer Masks

Although Elements 8 is nonmodal as well, there is still not a separate Masks panel within Elements

This means that you can create a mask by either using the selection method described shortly or by painting on the layer mask, but not by using Color Range in the midst of creating a mask

Masking a Selection

When you create a selection first and then create an adjustment layer, we refer to it as

masking a selection Creating an adjustment layer that is masked based on a selection

is easy, especially since you’ve already seen in Chapter 4 some of the methods you can

use to create selections

to mask an adjustment layer based on a selection, start by creating a selection that defines the subject you’d like to modify

then create a new adjustment layer of the desired type (in this case using levels) Because a selection is active when the adjustment layer is initially created,

photoshop assumes you want to mask the adjustment layer based on the selection

therefore, the adjustment layer applies only to the areas that are selected when you

create the adjustment layer

notice that when the adjustment layer appears in the layers panel, the layer mask is partially white and partially black the white areas match the shape of the

selection you originally created (see Figure 6.12) When you make adjustments to the

levels dialog box, as in this example, the adjustment affects only the area that was

selected when the adjustment layer was created

Figure 6.12 When you create an adjustment

layer with an active selection, the mask for that adjustment layer reflects the shape of the selection, so the adjustment applies only to that area of the image

using this concept, it’s easy to see how you could create a selection to define the area you want to emphasize and then create a levels adjustment (or a different

type of adjustment as appropriate) to adjust that area and draw more attention to

it remember that our eyes tend to go to areas that are brighter and more contrasty,

so if you want to help make your subject stand out from the background, you could

make two levels adjustments in the first you may adjust the background to be a little

darker and less contrasty, and in the second you may adjust the subject to be a little bit

brighter and perhaps more contrasty as well (see Figure 6.13.)

For Photoshop Elements Users: Layer Masks

Although Elements 8 is nonmodal as well, there is still not a separate Masks panel within Elements

This means that you can create a mask by either using the selection method described shortly or by painting on the layer mask, but not by using Color Range in the midst of creating a mask

Figure 6.13 By making adjustments using layer masks, you can help emphasize your subject by applying one type of adjustment

to the subject and a different one to the background

Using the Color Range Option

the Color range option, which is part of the masks panel in Cs5, offers an efficient method to create a selection for the layer mask even if you’ve already begun setting the adjustment layer You can use the options within the masks panel at any time ini-tially the adjustment is set to affect the entire image unless you began with a selection

if you began the adjustment process by first creating a selection and then opening an adjustment layer, the Color range control will operate only within that selection, not across the entire image Color range becomes a way to limit the effect to a subset of your original selection

When you click the Color range option, the Color range tool appears use

it the way we discussed in Chapter 4 to define the area you want the adjustment to affect think of this as an automated way of controlling where to apply the ment the ability to use the Color range tool while in the midst of making an adjust-ment is extremely helpful

Note: Often it’s helpful to set the Selection preview within Color Range to grayscale to more easily

see the selection

let’s consider an example to see how these panels work when you’re optimiz-ing your image Figure 6.14 shows the panels for an image where we want to lighten the subject rather than making a selection beforehand as you might have done in earlier versions of photoshop, open the Adjustments panel and click on levels Adjust the sliders to approximately where you think you want them then click the masks panel and choose Color range Click on the subject and use Color range to make the best selection you can then use mask Edges to tweak the edges now go back to the Adjustments panel and finalize the settings

Figure 6.14 Since CS5 is nonmodal, you can

have an adjustment dialog open while you are tweaking the mask and easily alternate between the mask and the dialog

Painting on a Mask

in some situations you don’t want to create the adjustment layer mask based on a selection When the edge of the area you want to adjust isn’t well defined, it’s often easier and more efficient to paint directly on the mask to control where the effect is visible the concept is that you paint with white or black on the mask to control the visibility of the effects of that layer

Almost all of us have been using a paintbrush since we were preschoolers, so creating a mask by painting is usually a very natural and intuitive approach to use this approach, take the following steps:

1. Create an adjustment layer, in this case a levels adjustment layer

2. make an adjustment so you can see an effect in the image Concentrate on making the particular section of your image look the way you want, and don’t worry that the rest of the image may be “ruined.” We’ll use the layer mask to restore those areas to their “before” states

Note: We recommend making an exaggerated adjustment when you’re first learning to use an adjustment layer so it’s easier to see exactly where in the image the adjustment layer applies

3. to modify the mask for an adjustment layer, select the Brush tool We usually use a soft brush (0% hardness), but in some instances you will want to use a harder brush or even a totally hard brush to make a discrete edge

Figure 6.13 By making adjustments using layer masks, you can help emphasize your subject by applying one type of adjustment

to the subject and a different one to the background

Using the Color Range Option

the Color range option, which is part of the masks panel in Cs5, offers an efficient

method to create a selection for the layer mask even if you’ve already begun setting

the adjustment layer You can use the options within the masks panel at any time

ini-tially the adjustment is set to affect the entire image unless you began with a selection

if you began the adjustment process by first creating a selection and then opening an

adjustment layer, the Color range control will operate only within that selection, not

across the entire image Color range becomes a way to limit the effect to a subset of

your original selection

When you click the Color range option, the Color range tool appears use

it the way we discussed in Chapter 4 to define the area you want the adjustment to

affect think of this as an automated way of controlling where to apply the

ment the ability to use the Color range tool while in the midst of making an

adjust-ment is extremely helpful

5. Zoom in so you can easily see the area you want to change

6. place your cursor on the image, and begin painting with black as your fore-ground color to remove the effects of your adjustment from that area

7. if you make a mistake, reverse your brush colors by pressing x so that white is your foreground color then paint over the area to correct the mistake layer masks are very forgiving!

to help you see exactly where you have masked the image and where the effect will appear, press the \ key this will create a type of quick mask over your image A transparent red layer will appear over the masked areas, as shown in Figure 6.15 As you paint with black, the red area will increase; to remove the red from an area and allow the effect to be visible there, paint with white We know it’s a little confusing to paint with black and have it appear red, but remember you’re not really painting on the image You’re painting on the layer mask, and the red is there as a superimposed version of the mask that’s easier to see to remove the quick mask, press the \ key again this is one of our favorite tricks!

Figure 6.15 Pressing the backslash (\) key makes a red mask appear over the parts of your image that are masked,

helping you to see whether you need to refine the mask

Note: Another way to view the mask is to Alt/Option+click directly on the adjustment layer mask

in the Layers panel That way, the mask appears in place of your image preview, making it easy to clean

up small areas that may have been missed in painting

one of the benefits of using layer masks is that if you decide you need to further revise the layer mask, you can simply click the adjustment layer to make it active, and

paint as needed to change the areas where the adjustment is blocked or revealed

Note: Some people find it easier to paint an outline of the area that they want to mask while looking at the image, then Alt/Option+click on the mask in the Layers panel to see the mask preview

in place of the image That way they can more easily fill in the area within the outline When done, Alt/

Option+click on the mask icon again to return to the image preview

At times, you’ll want the adjustment layer to apply to a very small area of your image, but that area won’t be conducive to making a selection in such situations, it

may seem that the only solution is to paint with black throughout most of the image

An easier way is to begin with a layer mask that is already filled with black and then

paint with white on the areas where you want the effect to show to do this, take

these steps:

1. After creating the new adjustment layer, choose Edit > Fill from the menu

2. select Black from the use drop-down list, and click ok (see Figure 6.16) this

fills the layer mask with black, blocking the effect of the adjustment from the entire image

Figure 6.16 You can use the Fill command

to fill a layer mask with black and then paint with white to apply the adjustment to specific areas of the image

3. use the Brush tool with the foreground color set to white to paint the

adjust-ment in the areas where you’d like it to be applied

Note: You can also use Alt+Delete/Option+Delete to fill a layer mask with the foreground color and use Ctrl+Delete/F+Delete to fill a layer mask with the background color