How to Draw Great Cartoon Cars pot

This guide will help you with some of the problems involved with drawing cars and help you make something that looks really great.. Cartoon cars come in all different shapes, use this gu

How to Draw Great Cartoon Cars

Drawing cartoon cars that look good is not as easy as it may seem

because we are very familiar with the shape of a car

Though the image may look simple, there's actually a lot more going on

in the drawing than you may realize This guide will help you with some of the problems involved with drawing cars and help you make something that looks really great Let's get right into drawing cartoon cars before you start getting bored!

Step 1 - Car Curves

Draw three curves like in the step one image The large curve at the top will make the roof and back of the car The two smaller curves in front will make the hood of the car

Note that the large curve and the smaller curve are connected Cartoon cars come in all different shapes, use this guide to start, and then try experimenting with different shapes of your own!

Step 2 - Headlights and Body

Define the front of the car first To start this, place two circles on the outsides of the two smaller curves you created in step one Why make the headlights first on cartoon cars? The answer is because they will give you a guide where to place the lines on the outside of the

headlights You may notice that these lines on the outside of the

headlights look different Don't worry about this - once we have added the bumper they will look the same

TIP: Remember to let your curves flow If this seems unnatural to you,

try some practice curves on a piece of scrap paper You'll get it

eventually! When drawing cartoon cars it's important that the quality

of your curves is good or your end result won't look nearly as nice as it could

Connect the two lines that you just made outside of the headlights This line should have a slight curve in it Remember when drawing cartoon cars or anything for that matter, to draw lightly with your pencil so when it comes time to clean up your drawing you can erase any ugly unwanted lines easily

Add one last line from the back corner of your first big curve and attach

it to the front of the car Don't worry about the wheels just yet; we'll tackle those at the end as they are the hardest part to get looking right

Step 3 - Windows

You can draw the windows in any order you like, but it's easiest to start with the windshield

Notice how the two windows on the side are slightly different sizes This is due to perspective and will help make your cartoon cars look

Step 4 - The Big One!

Now that we've laid out the basic shapes of the car body, let's add in a bunch more details

Start with the easiest parts first - the rear-view mirrors The shapes are simple enough; add them on to both sides of the car just in front of the front-side windows

Next draw two rectangular, yet curvy, shapes to form the details on the front bumper Draw a curved rectangle behind these curves to finish off the front bumper Let it extend past the edge of the car on the left side This will cover up the difference between the lines on the outside of the headlights that we created in step two

Next, draw the wheel wells This can be a little bit tricky Because of perspective, like the windows, the front wheel should be larger than the back Draw lightly and keep trying until you get two curves for the wheels that look pleasing to you

Step 5 - Final Detailing

Let's finish off this drawing with some final details to really make it shine

Add a curve to the back of the car with a little circle on top to make the aerial for the car

Draw two rounded rectangles to the back of the car to create the tail light and the back bumper

The door handles are simple oval shapes Draw them just below the windows and remember that because of perspective the back door

handle should be smaller than the front one

Two rounded rectangles, one inside of the other will form the license plate Just above that draw the grill of the car To make the basic shapes for this draw two straight lines coming up from the details on the front bumper Then draw a curve at the top of these lines that connects them together We'll use rounded rectangles again to create the spaces in the grill

The last thing to add is the wheels Draw a large oval inside of the

wheel well Then draw another smaller oval inside of it This second oval should be a little closer to the back of the wheel than the front Look closely at the front wheel in step five for a clear example of this Again, perspective causes this to happen To give the wheel some

thickness First draw a small straight line that extends from the lowest

part of the larger oval you just drew Next, draw a curve that matches the curve of that oval starting from the end of the straight line that you just made This curve should connect with the body of the car

Add a hood ornament for the final detail You can copy the one in the image or create your own to add your personal touch to this cartoon car

That's it for this step by step lesson on how to draw great looking

cartoon cars There are a lot of little details that all come together to make the car look great If you find that you car didn't come out

looking too hot, go back to the start and try drawing it again I'm sure that you'll find that your second car looks much better than your first attempt Don't get discouraged, keep at it, and it will all come together!