Tribilogical Aspects of Metal Cutting.. Mechanics of the Metal Cutting Process.. The Influ-ence of Metal Cutting Forces on the Formation of Surface Texture in Turning.. Surface Integrity
Trang 1Kops, L Gould, M and Mizrach, M Improved Analysis of
the Workpiece Accuracy in Turning, based on the
Emer-ging Diameter ASME Pub., J of Engg for Ind., Vol 115,
253–257, Aug 1997
Koster, W.P., Field, M., Fritz, L.J., Gatto, L.R and Kahles,
J.F Surface Integrity of Machined Structural
Compo-nents Airforce Matls Lab Tech Report:
AFML-TR-70-11, mmP Project No 721-8, Metcut Research Associates
Inc., Cincinnati (Ohio), March, 1970
Kramer, B.M Tribilogical Aspects of Metal Cutting Proc of
ASME, PED-Vol.54/TRIB-Vol.2, 1991
Kumar, S and Hoefler, B Simulated Action [FEA
Model-ling of Machining] Cutting Tool Engg., 44–49, March,
1999
Lamb, A.D Some Aspects of the Character of Machined
Sur-faces Metals and Matls., 75–79, March, 1987.
Lee, E.H and Shaffer, B.W The Theory of Plasticity Applied
to a Problem of Machining J Appl Mech., Vol 18 (4),
405, 1951
Lombardi, G.G Kinematics and Dynamics [Internet
ad-dress can be found as follows]:
www.drphyscis.com/syl-labus/kinematics/kinematcis.htl
Lorenz, G Measurement of Machinability … A Survey of
Testing Methods IAAE Journal 70–81, June 1966.
Marusich, T.D and Ortiz, M Modeling and Simulation of
High-speed Machining Int J Num Met Eng’g., Vol 38,
3675–3694, 1995
Mechant, M.E Mechanics of the Metal Cutting Process J
Appl Phys., Vol 16 (5), 267 (a), (6) 318 and 324(b),
1945
Merchant, M.E and Zlatin, N In: Mech Eng’g., Vol 67,
737, 1945
Obikawa, T., Sasahara, H., Shirakashi, T and Usui, E
Ap-plication of Computational Machining Method to
Dis-continuous Chip Formation J of Manufact Science and
Engg., Vol 119, 667–674, 1997
Pahitzsch, G and Semmler, D Z fur wirtschaftlich
Ferti-gung In: Vol 55, 242, 1960; Vol 56, 148, 1961; and Vol
57, 45, 1962
Painter, P.R., Smith, G.T and Hope, A.D Performance
Eval-uation of a Machining Centre using Laser Interferometry
and Artifact-based Techniques Proc of FAIM’96, CRC
Press, Inc (NY), 962–974, 1992
Pawar, K., Forrester, P and Glazzard, J Value Analysis:
Inte-grating Product/Process Design Integrated Manuf
Sys-tems, Vol 4(3), 14–21, 1993
Pekelharing, A.J and Hovinga, H.J Wear at the End
Cut-ting Edge of Carbide Tools in Finish and Rough Turning
Proc of 8th Mach Tool Des Res Conf., 6430651, Sept
1967
Pekelharing, A.J Built-up Edge (BUE): Is the Mechanism
Understood? Annals of the CIRP, Vol 23(3), 207–211,
1974
Pontius, K Split Personality [Machining Dissimilar Metals]
Cutting Tool Engg., 41–43, Feb., 2002
Pugh, H.D Mechanics of the Cutting Process Proc of IME
Conf Tech Eng’g Manufact (London), 237, 1958
Rakhit, A.k., Sankar, T.S and Osman, M.O.M The Influ-ence of Metal Cutting Forces on the Formation of Surface Texture in Turning Int J of Mach Tool Des Res., Vol
16, 281–292, 1976
Shainin, D Better than Taguchi Orthogonal Tables ANSQC
Quality Congress Trans., Anaheim, USA, concerning: The Fundamentals and Future of Quality, 446–451, 1986
Shiraishi, M and Sato, S Dimensional and Surface Rough-ness controls in a Turning Operation Trans of ASME,
Vol 112, 78–83, 1990
Smith, G.T Surface Integrity Aspects of Machinability of Fe-C-Cu Powder Metallurgy Components Powder
Metal-lurgy, Vol 33(2), 157–164, 1990
Smith, G.T The Surface Integrity of Turned Ferrous Powder Metallurgy Components Powder Metallurgy, Vol 33(2),
155–165, 1990
Smith, G.T Secondary Machining Operations and the Re-sulting Surface Integrity: An Overview Surface
Topogra-phy, Vol 3, 25–42, 1990
Smith, G.T Some Aspects in the Surface Integrity and Tool Wear Associated with Turning Powder Metallurgy Com-pacts WEAR, Vol 151, 289–302, 1991.
Smith, G.T., Hope, A.D., Painter, P.R and Blackshaw, D.M.S
The Assessment of Machining and Turning Centres, using Artifact-based Techniques Proc of Lamdamap I,
Com-putational Mechanics, 275–286, 1993
Smith, G.T What is Machinability and How Can it be As-sessed? Int Conf on Industrial Tooling, Shirley Press
(Southampton, UK), 105–114, Sept 1995
Smith G.T Inspection of Components Manufactured on a Machining Centre, by On- and Off-line Techniques Proc
of FAIM’96, Begell House, Inc (NY), 216–224, 1996
Smith, G.T Ternary Manufacturing Envelopes (TME’s): A New Approach to Describing Machined Surfaces Int J of
Mach Tools and Manufact., Vol 40(2), 295–305, 2000
Smith, G.T Fight to the Finish [Tool Geometry and its
Af-fect on both: Roundness/Surface Texture] Metalwork-ing Production, 49–52, June, 2001
Spur, G., Pöllmann, A and Kirchheim, A Kombi-Sensorik beim Scherschneiden, Zeitschrift für wirtschaftliche Ferti-gung und Automatisierung In: Zwf, Vol 90, 1–2, 1995.
Stefanov, Y.P., Makarov, P.V., Burkov, P.V and Matveev, V.S
Dynamic Simulation of Chip Generation and Formation
in Metal Cutting Theoret and Appl Fracture
Mechan-ics, Vol 28, 117–124, 1997
Stout, K., How Smooth is Smooth? Surface Measurements and their Relevance in Manufacturing Production Engr.,
17–22, May 1980
Trang 2Strenkowski, J.S, and Athavele, S.M A Partially Constrained
Eulerian Orthogonal Cutting Model for Chip Control
Tools J of Manuf Science, Vol 119, 681–688, 1997.
Tay, A.A.O A Review of Methods of Calculating
Machin-ing Temperature J of Matls ProcessMachin-ing Tech., Vol 36,
225–257, 1993
Taylor, F.W On the Art of Cutting Metals Trans of ASME,
Vol 28, 31, 1907
Thomsen, E.G., Application of the Mechanics of Plastic
De-formation to Metal Cutting Annals of the CIRP, Vol 14,
113–123, 1966
Tlusty, J and Polacek, M., The Stability of Machine Tool
against Self-excited Vibrations in Machining ASME
Prod Res Conf (Pittsburgh), 454–465, 1963
Tönshoff, H.K Eigenspannungen und plastische
Verformun-gen im Werkstück durch spanned Bearbeitung Dr.-Ing
Dissertation, TH Hannover, 1965
Turley, D.M., Doyle, E.D and Samuels, L.E A Structure of
the Damaged Layer on Metals Proc of the Int Conf
on Prod Engg., Tokyo, Japanese Society of Prec Engrs.:
Part 2, 1974
Vajpayee, S Analytical Study os Surface Roughness in
Turn-ing WEAR, Vol 70, 165–175, 1981.
Wallace, P.W and Boothroyd, G Tool Forces and Tool-chip
Friction in Orthogonal Machining J Mech Eng’g Sci.,
Vol 6 (1), 74, 1964
Watson, D.W and Murphy, M.C The Effect of Machining on
Surface Integrity The Metallurgist and Matls Technol.,
199–204, April, 1979
Wells, J Material Matters [Optimisation of Workpiece
Matls] Cutting Tool Engg., 58–64, June 2005
Williams, J.E., Smart, E.F and Milner, D.R The Metallurgy
of Machining, Part 1: Basic Considerations and the
Cut-ting of Pure Metals Metallurgia, 3–10, Jan., 1970.
Williams, J.E., Smart, E.F and Milner, D.R The Metallurgy
of Machining, Part 2: The Cutting of Single-phase,
Two-phase and some Free Machining Alloys Metallurgia,
51–59, Feb., 1970
Whitehouse, D.J Beta Functions for Surface Topologie?
An-nals of the CIRP, Vol 27, 491–497, 1978
Whitehouse, D.J Conditioning of the Manufacturing Process
using Surface Finish Proc of Lamdamap III,
Computa-tional Mechanics, 3–20, 1997
Whitehouse, D.J Surface Measurement Fidelity Proc of
Lamdamap IV, WIT Press, 267–276, 1999
Young, H.T An Experimental Investigation of Temperatures
in Chip Formation Proc of 29th Int Matador Conf
(Manchester), The Macmillan Press Ltd., 559–565,
April 1992
Zorev, N.N Interrelation between Shear Processes Occurring
along Tool Face and on Shear Plane in Metal Cutting Int
Res in Prod Eng’g., 42, 1963 (Presented at Int Prod
Eng’g Res Conf., Pittsburgh, 1963)
Books, Booklets and Guides
Akao, Y Quality Function Deployment (QFD) – Integrating Customer Requirements into Product Design
Productiv-ity Press (Portland, Oregon), 1988
American National Standard (ANS) B211.1 – Surface In-tegrity 1986.
Amontons, G Histoire de l’Académie Royale des Sciences avec les Mémoires de Mathématique et de Physique
Paris, 1699
Armarego, E.J.A and Brown, R.H The Machining of Metals
Prentice-Hall Pub., 1969
Avner, S.H Introduction to Physical Metallurgy (2nd Ed.) McGraw-Hill Int Book Co., 1974
Arvill, J Mechanical Engineer’s Data Handbook
Butter-worth-Heinemann, 1997
Bajpai, A.C., Calus, I.M and Fairly, J.A Statistical Methods for Engineers and Scientists John Wiley Pub., 1979 Bedford, a and Fowler, W Engineering Mechanics – Statics and Dynamics (3rd Ed.) Prentice-Hall, Inc., 2002
Bell, S A Beginner’s Guide to Uncertainty of Measurement – Measurement Good Practice Guide NPL Pub No 11,
Aug 1999
Bhattacharyya, G.K and Johnson, R.A Statistical Concepts and Methods John Wiley Pub., 1977.
Birch, K Estimating Uncertainties in Testing – Measurement Good Practice Guide NPL Pub No 36, March 2001 Bird, J Engineering Mathematics Newnes – Elsevier
Sci-ence Pub., 2003
Boulger, F.W Machining – Theory and Practice ASM
(Cleveland, OH), 1950
Boothroyd, G Fundamentals of Metal Machining and Ma-chine Tools McGraw-Hill, New York, 1975.
Bowman, K Mechanical Behavior of Materials John Wiley
& Sons, Inc., 2004
Bowden, F.P and Tabor, D Frictionand Lubrication of Sol-ids Oxford University Press (London), 1954.
Brammertz, P.H Ursachen für Form und Massfehler an Fein-bearbeiten Werkstüchken Dissertation (T.H Achen),
1960
Carvil, J Mechanical Engineer’s Data Handbook
Butter-worth-Heinemann, 1994
Childs, T.H.C., Maekawa, K., Obikawa, T and Yamane,
Y Metal Machining – Theory and Applications Arnold
Pub., 2000
Collett, C.V and Hope, A.D Engineering Measurements
Pitman Pub Ltd., 1979
Coullomb, C.A Mémoires de Mathématique et de Physique
de l’Académie Royale des Sciences Paris, 1785.
Cross, N Engineering Design Methods – Strategies for Prod-uct Design (3rd Ed.) John Wiley & Sons Ltd., Nov 2003
Trang 3Cutting Tool Materials American Soc of Metals (OH),
1981
Dagnall, H Let’s Talk Roundness Taylor Hobson Ltd Pub.,
Nov 1996
Dagnall, H Exploring Surface Texture (3rd Ed.) Taylor
Hob-son Ltd Pub., March 1998
Degarmo, E.P, Black, J.T and Kosher, R.A Materials and
Processes in Manufacturing (9th Ed.) John Wiley & Sons,
Inc., 2003
Dowson, G Powder Metallurgy – The Process and its
Prod-ucts Adam Hilger – IOP Pub Ltd., 1990.
Ernst, H Physics of Metal Cutting ASM (Cleveland, OH),
1938
Griffiths, B Manufacturing Surface Technology – Surface
In-tegrity and Functional Performance Penton Press, 2001.
Höganäs AB Pub Machining Guidelines – Book 5 Sept.,
1998
Higgins, R.A Properties of Engineering Materials Hodder
and Stoughton Educ., 1979
Influence of Metallurgy on Hole Making Operations
Ameri-can Soc of Metals (Ohio), 1978
Influence of Metallurgy on Machinability American Soc of
Metals (Ohio), 1975
Preliminary Study of Variations in Machinability of Carbon
Steel PERA Pub No 179, April 1968.
Kaczmarek, J Principles of Machining by Cutting, Abrasion
and Erosion Peter Peregrinus Pub (Warsaw, Poland),
1976
Kalpakjian, S Manufacturing Processes for Engineering
Ma-terials (3rd Ed.) Addison Wesley Longman, Inc., 1997
Komanduri, R Symposium on US Contributors to
Machin-ing and GrindMachin-ing Research in the 20th Century American
Soc for Mech Engrs.: Applied Mechanics Reviews, Vol
46(3), March 1993
Kronenberg, M Machining Science and Application
Per-gamon Press (NY/London), 1966
Kruszynski, B.W and Cuttervelt, C.W Plastic Deformation
in the Surface Layer after Cutting Advanced
Manufac-turing Engineering, Vol 1, 1989
Mills, B and Redford, A.H Machinability of Engineering
Materials Applied Science Pub., 1983.
Modern Metal Cutting – Part 12: Machining Economics
Sandvik Coromant Pub., 1981
Mummery, L Surface Texture Analysis – The Handbook
Hommelwerke GmbH Pub., 1990
Ramsey, D.C Engineering Instrumentation and Control
Stanley Thornes Pub Ltd., 1981
Reason, R.E The Measurement of Surface Texture
Cleaver-Hume Press Lt., 1960
Roller Burnishing, Sandvik Coromant Pub., No.:
HV-5300:012-ENG
Rowe, G.W An Introduction to the Principles of Metalwork-ing Edward Arnold (Pub.) Ltd, 1968.
Sander, M A Practical Guide to the Assessment of Surface Texture Feinprüf GmbH Pub (Göttingen), 1991 Sandvik Coromant Pub The Cutting Process No.: CMSP
900–038 ENG, 1989
Schaffer, J.P, Saxena, A., Antlovich, S.D., Sanders, Jr., T.H
and Warner, S.B The Science of Engineering Materials
(2nd Ed.) McGraw-Hill Comp Inc., 1999
Shaw, M.C and Cook, N.H Metal Cutting Principles MIT
Pub 3rd Ed., Chapter 4, 1954
Shaw, M.C Metal Cutting Principles Clarendon Press
(Ox-ford), 1984
Smith, G.T Advanced Machining – The Handbook of Cut-ting Technology, IFS Pub./Springer Verlag, 1989 Smith G.T CNC Machining Technology, Springer Verlag,
1993
Smith, G.T Industrial Metrology – Surfaces and Roundness
Springer Verlag, 2002
Sokolowski, A.P Prazision in der Metallbearbeitung VEB
Verlag Technik, Berlin, 1955
Stout, K Quality Control in Automation Kogan Page Ltd.,
1985
Surface Technology – Wear Protection Verlag Moderne
In-dustrie AG & Co., 1990
Swanson, R.C Quality Improvement Handbook – Team Guide to Tools and Techniques Kogan Page Ltd., 1995 Thomas, T.R Rough Surfaces (2nd Ed.) Imperial College Press, 1999
Trent E.M Metal Cutting (2nd Ed.) Butterworths & Co (Pub.) Ltd., 1984
Taguchi, G., Experimental Designs (3rd Ed.) Vol 1, Maru-zen Pub., 1976
Valentino, J.V and Goldenberg, J Introduction to Computer Numerical Control (CNC) (2nd Ed.) Prentice Hall Int., 2000
Vickerman, J.C Surface Analysis – The Principal Tech-niques John Wiley and Sons Ltd., 2000
Vieregge, G Zerspanung der Eisenwerkstoffe [Machining of
Ferrous Metals], Vol 16 of Stahleisenbücher [Iron and Steel Series – 2nd Ed.], Verlag Stahliesen (Düsseldorf, 1970
Whitehouse, D Surfaces and their Measurement Hermes
Penton Science., 2002
Zorev, N.N Metal Cutting Mechanics Pergamon Press
(Oxfrod), 1966