Tài liệu kỹ thuật mã hàng quần âu, áo sơ mi, áo jacket, áo veston của công ty may phần 5

Floor Set Date : Target Direct Units :0 Block Pattern # :Reverse Product Package :No Final Fit Due : Test Program : 1 1/4” STAND WITH 4 ROWS OF TRAPUNTO 3/8” SINGLE NEEDLE STITCH 7” 3/8

Trang 1

Time Zone Printed for: Central Standard Time

Note: Date and Time values are based on Central Standard Time time zone where indicated

They may not reflect the actual Date and Time of the Document Publisher

TO JCPENNEY CORPORATION, JCPENNEY PURCHASING CORPORATION AND ANY AFFILIATES (TOGETHER "JCPENNEY") Acceptance of this document by supplier constitutes an agreement to maintain the

confidentiality of the enclosed information Any distribution of its content in garment, merchandise or specification package form constitutes a breach of this confidentiality agreement and will result in the indefinite suspension of the supplier's right to do business with JCPenney.

Item and Size Variation Xref Table

Item and Color Variation Xref Table

Contents within this document are CONFIDENTIAL AND PROPRIETARY TO JCPENNEY CORPORATION,JCPENNEY PURCHASING

Trang 2

Reverse Product Package: No Specification: 001 : Primary Spec Buyer: Kathleen Munson

Sample Size : Material Category : Fabric ID Description :

Sample Request Date :10/20/2015 Material Description :

Sample Requested Delivery Date : Sample Status :

1 1/4” STAND WITH

4 ROWS OF TRAPUNTO

3/8” SINGLE NEEDLE STITCH

7”

3/8” SINGLE NEEDLE TOPSTITCH

FUNCTONAL WELT POCKET

1 1/2” W X 6 1/2” L 8” DOWN FROM HPS

PLEASE USE SLEEVE BELT CONSTRUCTION FROM #128229

September COLLECTION Fall 16 S/143769 TRENCH FULLY LINED

CB = 23”

Waist @ Top Edge (Bottom):

Hip/Seat frm Top Edge:

Thigh @ Crotch:

Leg Opening (Long) Rel:

Inseam (Long):

Front Rise frm Top Edge:

Back Rise frm Top Edge:

Waistband Width (Bottom):

Trang 3

Floor Set Date : Target Direct Units :0 Block Pattern # :

Reverse Product Package :No Final Fit Due : Test Program :

1 1/4” STAND WITH

4 ROWS OF TRAPUNTO

3/8” SINGLE NEEDLE STITCH

7”

1 1/2” W X 6 1/2” L 8” DOWN FROM HPS

PLEASE USE SLEEVE BELT CONSTRUCTION FROM #128229

September COLLECTION Fall 16 S/143769 TRENCH FULLY LINED

CB = 23”

Comments:

Contents within this document are CONFIDENTIAL AND PROPRIETARY TO JCPENNEY CORPORATION,JCPENNEY PURCHASING CORPORATION AND ANY AFFILIATES (TOGETHER

Trang 4

Item #: , , , , , , , , , , , , , , , , , , , , , , , , ,

, , , , , , , , , , , , , , , , , , , , , ,

Assigned IBO: KOREA IBO Contact: Clara Park

Supplier Name: SG CORPORATION * Other Supplier: Exclusive Brand:

Supplier #: 751438 Supplier Country: KOREA (REPUBLIC OF)

Dear Carla,Please kindly note we sent 1st Concept sample in Dark Dune to your attention via DHL#86 1319

6476 on 11/13ex-11/16eta Please kindly review and advise Thanks

PPK#143769 LC Collection FALL 16 September TrenchSupplier : SG

Fabric : Saeban, SB-42213A DWR FINISH, 98% Cotton 2% Span(Dark Dune)Submitted item : 1st Concept sample

Remark : Available color/quality-Button

Dear Carla,Please kindly advise which color we should use for body lining&pocketing As the shell ismulti(Black/White, Kingzebra), please kindly check and advise Thanks

Dear Lendrell,Sorry for late call-out Per checking BOM page, hidden snap q'ty should be 5pc, not 8pc :( We willfollow q'ty on BOM for next sample you can receive the sample by 3/1eta Thanks in advance!!

Bokyoung Lee 02/29/2016

Hi Lendrell,(Missy DEV#1 submitted on 3/1eta _ SB-42213A)

YesContents within this document are CONFIDENTIAL AND PROPRIETARY TO JCPENNEY CORPORATION,JCPENNEY PURCHASING CORPORATION AND ANY AFFILIATES (TOGETHER

"JCPENNEY")

Trang 5

JY Park 03/30/2016

Pls revise label codes as below since we need to use all black labels

1)4V11A3 -> Pls reivse this label to 81-41-450-A And we'll leave fit name blank Pls confirm

2)4W12D3 -> Pls revise this label to 4O12C3

Thanks for your prompty update in advance

MISSY 2nd dev comments are available in Flex Style is approved to PP w/ corrections

Thanks and have a great day,

Dear Lendrell,(PPK143769// Petite Dev#1 submitted on 4/8eta _ SB-42213A)Pls note that we sent Dev#1 to your attention via DHL#15 7413 4026(NY) Upon receipt, Pls see w/

attached checklist and advise your cmts Thanks, BK Yes

Lendrell Martin No Entered on date

PETITE 1st dev comments are available Style is approved to PP w/ corrections

Dear Catherine,(Missy PP#1 submitted on 5/2eta_ SB-42213A)Pls kindly note that we sent PP#1 of Missy and approved dev#2 and paper pattern of each sample

to your attention via DHL#22 3938 0441(HK).Pls kindly see w/ attached checklist and advise your

Catherine Hung 05/10/2016

Hi BokyoungMissy size of fabrication SB-43321A,#1 Pre-Production sample was APPROVED WITHCORRECTIONS – CORRECT AND PROCEED TO PRODUCTION, approved sample is seal lockedand RR is now added in PPK, the sealed samples will return to you on this Friday (5/13) , pls passseal sample to factory for further QA processes Please upload the finaled e-pattern via DB forrecord and send PP keep sample to IBO TD for keep ref Thanks and best regards!

Trang 6

"JCPENNEY")

Trang 7

1 1/4” STAND WITH

4 ROWS OF TRAPUNTO

3/8” SINGLE NEEDLESTITCH

7”

1 1/2” W X 6 1/2” L8” DOWN FROM HPS

PLEASE USE SLEEVE BELT CONSTRUCTIONFROM #128229

September COLLECTIONFall 16

S/143769 TRENCHFULLY LINED

CB = 23”

Comments :

Trang 8

Image Filename: 143769 REFERENCE.ai

Comments :

CORPORATION AND ANY AFFILIATES (TOGETHER "JCPENNEY")

Trang 10

Image Filename: 143283 LEATHER TRENCH.ai

Comments :

Trang 11

Placement/Comments Quantity

body and

DTMSHELL

FULL BODY AND SLEEVE LINING,UNDER GUN FLAPS

DTMSHELL POCKET BAGSMAIN

Trang 12

Placement/Comments Quantity

body and

DTMSHELL

FULL BODY AND SLEEVE LINING,UNDER GUN FLAPS

"JCPENNEY")

Trang 13

Packaging & Labeling

CATALOG OR INTERNET - PLASTICBAG - Please follow the JCPenneysupplier web site for plastic baginformation

CATALOG OR INTERNET - Must haveintegrated hang tags, main woven labels,care labels, and size woven label

81-41-450-A

Label / Woven ; CENTERFOLD LOOP /

MISSY PETITE AND WOMAN -WOVENLOOP LABEL - SIZE / CONTENT / COO.Leave fit name blank

4O12C3

This care does NOT have size printed on

it Please place in the wearers left sideseam as diagram SPECIAL

INSTRUCTION: FOR INSIDE CAMILAYER IN 2 PC DRESSINGS:CARELABEL TO BE USED ON INSIDE CAMILAYER PLACE AS DIAGRAM

MISSY - PETITE - WOMANS - PRINTEDVERTICAL CARE LABEL:

CATALOG OR INTERNET STICKER Please place in the lower right side ofplastic bag Please make sure theIntegrated bar code from the hang tag isshowing thru the bag

Please place at the center back neck asdiagram lSPECIAL INSTRUCTION:

FOR INSIDE CAMI LAYER IN 2 PC

DRESSINGS:DO NOT USE MAINLABEL .WOVEN SIZE/CONTENT/COO

TO BE USED ONLY

MISSY/TALL/PETITE/WOMAN CAREERMAIN BRANDED WOVEN LABEL

MISSY/TALL/PETITE/WOMAN CAREERMAIN BRANDED HANG TAG

Please use a 3 inch; black swift tackattach and place as diagram For catalogand table fold orders - swifttack behindmain size/content/co label

MISSY/TALL/PETITE/WOMAN CAREERSECONDARY HANG TAG

Trang 15

Supplier Name: SG CORPORATION * Supplier #: 751438 Supplier Email: jcp@sgsegye.com

Requested Date: 10/23/2015 Measurement Set: 001 : 143769-September Woven Trench Sample Request Name: development

Requested By: Michelle F Ye Ship Sample To: Home Office Sample Name: Sample - 1

Requested Delivery Date: Attention: Michelle Ye Request Comments: September development

Sample Request Name: development Sample Name: Sample - 1

POM # POM Description HTM Comments Tol (+) Tol (-)

RequestedMeasurement(Referenced from 106029)

101.4.9 CB Lgth frm Neck (Hip) 1/2 1/2 23122.4.9 Front Lgth HPS (Hip) 1/2 1/2 27 1/2155.2 Shoulder Slope frm HPS 1/8 1/8 1 1/4

103 Across Back 5 1/2" from HPS 3/8 3/8 15 3/4

108 Across Chest 5 1/2" from HPS 3/8 3/8 14 1/2178.1 Neck Width Seam to Seam 1/4 1/4 6 1/2175.1 Frt Nk Drop Img Line HPS to Edge 1/4 1/4 4174.2.9 Bk Nk Drop Img Line HPS to Seam 1/8 1/8 5/8209.1 Bust/Chest 1" Below Armhole 3/4 1/2 40

213 Sweep @ Edge (Rel)

206 Elbow

Average 9" frombottom edge, Tall

9 7/8" 1/2 1/2 12 1/2207.4 Cuff/Sleeve Opening Rel (L/S) 3/8 3/8 11

316.1 Collar Band Height @ Center Front 1/8 1/8 1/2

316 Collar Band Height @ Center Back 1/8 1/8 1 1/4

Trang 16

RequestedMeasurement

Lapel Point Width

from collarband toplacket edge 1/8 1/8 3

122.4T.9 Front Lgth HPS (Hip) 1/2 1/2 29101.4T.9 CB Lgth frm Neck (Hip) 1/2 1/2 27 1/2115.4T Sleeve Lgth CBN (L/S) 5/8 5/8 34 1/2

"JCPENNEY")

Trang 17

Requested By: Lendrell Martin Ship Sample To: Home Office Sample Name: Sample - 2

Requested Delivery Date: 03/21/2016 Attention: Lendrell Martin Request Comments:

101.4.9 CB Lgth frm Neck (Hip) 1/2 1/2 23

103 Across Back 5 1/2" from HPS 3/8 3/8 15 3/4

108 Across Chest 5 1/2" from HPS 3/8 3/8 14 1/2178.1 Neck Width Seam to Seam 1/4 1/4 6 1/4175.1 Frt Nk Drop Img Line HPS to Edge 1/4 1/4 4 1/4174.2.9 Bk Nk Drop Img Line HPS to Seam 1/8 1/8 5/8209.1 Bust/Chest 1" Below Armhole 3/4 1/2 40

206 Elbow

9 7/8" 1/2 1/2 12 1/2207.4 Cuff/Sleeve Opening Rel (L/S) 3/8 3/8 10 3/4

316.1 Collar Band Height @ Center Front 1/8 1/8 1 1/4

316 Collar Band Height @ Center Back 1/8 1/8 1 1/4

Trang 18

Lapel Point Width

from collarband toplacket edge 1/8 1/8 3

122.4T.9 Front Lgth HPS (Hip) 1/2 1/2 29101.4T.9 CB Lgth frm Neck (Hip) 1/2 1/2 27 1/2115.4T Sleeve Lgth CBN (L/S) 5/8 5/8 35 1/4

"JCPENNEY")

Trang 19

Requested Date: 03/11/2016 Measurement Set: 002 : 143769-PETITE-September Trench Sample Request Name: Development

Requested By: Lendrell Martin Ship Sample To: Home Office Sample Name: Sample - 1

Requested Delivery Date: 03/21/2016 Attention: Lendrell Martin Request Comments:

Sample Request Name: Development Sample Name: Sample - 1

101.4.9 CB Lgth frm Neck (Hip) 1/2 1/2 21 1/2122.4.9 Front Lgth HPS (Hip) 1/2 1/2 23 1/2

103 Across Back 5 1/2" from HPS 3/8 3/8 15

108 Across Chest 5 1/2" from HPS 3/8 3/8 13 3/4178.1 Neck Width Seam to Seam 1/4 1/4 6175.1 Frt Nk Drop Img Line HPS to Edge 1/4 1/4 4174.2.9 Bk Nk Drop Img Line HPS to Seam 1/8 1/8 5/8209.1 Bust/Chest 1" Below Armhole 3/4 1/2 38 1/2

Closed, StraightAcross 3/4 1/2 43 1/2176.1 Armhole Depth frm HPS (Squared) 1/4 1/4 9 1/2

205.2 Upper Arm 1" Below Armhole 1/2 1/2 14

206 Elbow

9 7/8" 1/2 1/2 12207.4 Cuff/Sleeve Opening Rel (L/S) 3/8 3/8 10 1/4

316.1 Collar Band Height @ Center Front 1/8 1/8 1

316 Collar Band Height @ Center Back 1/8 1/8 1

Lapel Point Width

from collarband toplacket edge 1/8 1/8 2 3/4Contents within this document are CONFIDENTIAL AND PROPRIETARY TO JCPENNEY CORPORATION,JCPENNEY PURCHASING CORPORATION AND ANY AFFILIATES (TOGETHER

Trang 20

Sample Request Name: Development Sample Name: Sample - 1

"JCPENNEY")

Trang 21

Stores Sub#: Supplier Email: jcp@sgsegye.com

Date Vendor Submitted to JCP: 02/29/2016 Vendor Measurer Name: Bokyoung Lee(Prephase)

Date Designer Evaluated Sample:

Design Intent Status:

Tech Design Comments: MISSY

2nd Dev Sample

Lendrell and Gabby attended fit session on 3/2/16

Sample Color: Dark Dune

Fabrics :SB-42213A 98%COTTON 2%SPX

FIT / MEASUREMENTS:

-Shoulders appear too sloped with added shoulder pad Pls release at

least 1/4”-3/8” Neckline circumference appears big, however neck

width might be ok as is Neckline seam stands away from neck slightly

-Lower FND 1/4” for better fit on body

-Lower armhole 1/4"

-Reduce sleeve opening 1/2”

-Lengthen sleeve 1”

-Garment has projection that stands away on body Please flatten

shape for more flattering visual on body (SEE PHOTO)

Construction:

-Overall construction looks good

Style is not approved Pls re-submit 2nd dev

Lendrell Martin

QuotedMeasurement

ActualMeasurement New Request

Trang 22

QuotedMeasurement

ActualMeasurement New Request122.4.9 Front Lgth HPS (Hip) 1/2 1/2 27 1/2 25 1/8 0 25

103 Across Back 5 1/2" from HPS 3/8 3/8 15 3/4 15 5/8 0 15 3/4

108 Across Chest 5 1/2" from HPS 3/8 3/8 14 1/2 14 1/4 0 14 1/2

178.1 Neck Width Seam to Seam 1/4 1/4 6 1/2 6 1/4 0 6 1/4

209.1 Bust/Chest 1" Below Armhole 3/4 1/2 40 40 0 40

213 Sweep @ Edge (Rel) Closed, Straight Across 3/4 1/2 45 45 0 45

Lapel Point Width

from collarband to placket

571

Welt Pocket Position frm CF @

571

"JCPENNEY")

Trang 23

QuotedMeasurement

591

Welt Pocket Position frm Btm

Edge (Bttm Inner Corner)) 1/8 1/8 3 1/4 3 1/8 0 3 1/4

Trang 24

DWR,DARKDUNE, 98%COTTON 2%SPX, ONBODY

Comments :

Trang 25

Comments :

Trang 26

Sample Size: M Direct Sub #: Supplier Name: SG CORPORATION *

Date Vendor Submitted to JCP: 03/24/2016 Vendor Measurer Name: Bokyoung Lee(Phase1)

Date Designer Evaluated Sample:

Design Intent Status:

Tech Design Comments: MISSY

2nd Dev Sample

Lendrell attended fit session on 3/30/16 Photos shown to Aliss 4/5/16

Sample Color: DARK DUNE

Fabrics: SB-42213A 98%COTTON 2%SPX

FIT / MEASUREMENTS:

-Front princess panel appears to have projection that collapses under

“gun flap” detail on front (SEE FIT PHOTO AND FLATTEN SHAPE

ACCORDINGLY)

-Back armhole cuts in below back yoke detail causing excess pull lines

on body restricting reach forward slightly Transfer slightly at sleeves

and pick up back armhole as pinned in fit photos

CPA:

-Ensure hem aligns when snaps are fastened

-Cation topstitching handling to ensure stitch tension is balanced in

production

Development sample is APPROVED WITH CORRECTIONS –

CORRECT AND PROCEED TO PRE-PRODUCTION SAMPLE Send

sample to the specified Technical Designer by the requested due date

Please attach approved production pattern (0x0 shrinkage, no seam

allowances) to Sourcing Board when sending keep sample

Trang 27

QuotedMeasurement

103 Across Back 5 1/2" from HPS 3/8 3/8 15 3/4 15 3/4 0 15 3/4

108 Across Chest 5 1/2" from HPS 3/8 3/8 14 1/2 14 3/8 0 14 1/2

178.1 Neck Width Seam to Seam 1/4 1/4 6 1/4 6 3/8 0 6 1/4

209.1 Bust/Chest 1" Below Armhole 3/4 1/2 40 40 1/2 0 40

213 Sweep @ Edge (Rel) Closed, Straight Across 3/4 1/2 45 45 0 45

Lapel Point Width

from collarband to placket

571

Trang 28

QuotedMeasurement

571

591

Welt Pocket Position frm Btm

Edge (Bttm Inner Corner)) 1/8 1/8 3 1/4 3 3/8 0 3 1/4

Trang 29

Comments :

Trang 30

SB-42213ADWR 98%COTTON 2%SPX,ONFORM

Comments :

Tiêu đề	Tài liệu kỹ thuật mã hàng quần âu, áo sơ mi, áo jacket, áo veston của công ty may phần 5
Trường học	University of Textile Technology (example placeholder)
Chuyên ngành	Technical Garment Specification
Thể loại	Technical Specification Document
Năm xuất bản	2016
Thành phố	Unknown

Định dạng
Số trang	61
Dung lượng	1,37 MB