Iec 60603 7 81 2015

Subseq ent sp cif i ation do not d pl cate inf ormation given in the b se doc ment, but l st only ad itional req irements.. The fol owin diagram s ows the inter elation of the doc ments:

Connect ors for elect ronic equipment –

Part 7- 81: Det ai specificat ion for 8-w ay, shielded, f ee and fixed connect ors, for

dat a t ransmissions wit h f equencies up t o 2 000 MHz

Connect eurs pour équipement s élect roniques –

Part ie 7- 81: Spécificat ion part icul ère pour les fiches et les embases bl ndées à

8 voies pour la t ransmission de données à des f équences jusqu’à 2 000 MHz

THIS PUBLICATION IS COPYRIGHT PROTECTED

Copyr ight © 2 15 IEC, Ge e a, Switzer la d

Al rig ts r es r ve Unle s oth rwis s e ifi d, n p rt of this p blc tio ma b r epr od c d or uti z d in a y form

or b a y me n , ele tr onic or me h nic l in lu in p oto o yin a d microfim, with ut p rmis io in wr itin from

eith r IEC or IEC's memb r Natio al Commite in th c u tr y of th re u ste If y u h v a y q e tio s a o t IEC

c p r i ht or h v a e q ir y a o t o tainin a ditio al ri hts to this p blc tio , ple s c nta t th a dr es b low or

y ur lo al IEC memb r Natio al Commite for ur th r informatio

Dr oits d r eprod ctio ré er vé Sa f in ic tio c ntraire, a c n p rtie d c te p blc tio n p ut êtr e repro uite

ni uti s e s u q elq e forme q e c s it et p r a c n pro é é, éle troniq e o mé a iq e, y c mp s la p oto o ie

et le micr ofilms, s n la c rd é rit d l EC o d Comité n tio al d l EC d p y d d ma d ur Si v u a e d s

q e tio s s r le c p r i ht d l EC o si v u d sir ez o te ir d s droits s p léme tair es s r c te p blc tio , uti s z

le c ord n é s ci-a r ès o c nta te le Comité n tio al d l EC d v tr ep y d résid n e

Th Intern tio al Ele trote h ic l Commis io (IEC) is th le din glo al org niz tio th t pr ep res a d p bls e

Internatio al Sta d r ds for al ele tri al ele tr onic a d r elate te h olo ie

Abo t IEC p blc tio s

Th te h ic l c nte t of IEC p blc tio s is k pt u d r c n ta t r eview b th IEC Ple s ma e s re th t y u h v th

late t e itio ,a c rrig n a or a ame dme t mig t h v b e p bls e

IEC Cat alo ue - webst ore.e ch/ cat alo ue

Th st an -alo e a plc t io for c n ultin th e tire

biblo ra hic l informat io o IEC Intern tio al Sta d rd ,

Te h ic l Sp cific tio s, Te h ic l R ep rts a d oth r

d c me ts A v aia le for P , Ma OS, A ndroid Ta let s a d

iPa

IEC p blc t i ns s arch - www ie ch/ se rch u

Th a v an e s arc e a le to fin IEC p blc t io s b a

variety of crit eria (efere c n mb r, t ext, t ec nic l

c mmitt e,…) It als gives informatio o projec t s, re la e

a d wit hdrawn p blc tio s

IEC Just P blshed - webst ore.e ch/ just pu lshed

St ay u to d te o al n w IEC p blc t io s Ju t Pu ls e

d t ais al n w p blc t io s rele s d A v aia le o ln a d

als o c a mo t h b emai

Ele t ro edia - www ele t ro edia.org

Th world's le din o ln dic t io ary of elec t ro ic a d

ele t ric l t erms c nt ainin more th n 3 0 0 terms a d

d finitio s in En ls a d Fre c , wit h e uiv ale t t erms in 15

a ditio al la g a e Als k nown a t he Int ern t io al

Elec t rot ec nic l Vo a ulary (IEV ) o ln

IEC Glos ar y - st d.e ch/ glos ary

More t ha 6 0 0 ele t rot ec nic l termin lo y e t rie in

En ls a d Fre c e tra t ed fom t he Terms a d Definitio s

c la s of IEC p blc t io s is u d sin e 2 0 Some e t rie

h v e b e c le t ed fom e rler p blc tio s of IEC TC 3 ,

7 ,8 a d CISPR

IEC Cust omer Servic Cent re - webst ore.ec ch/ csc

If y ou wis to giv e u your fe d a k o t his p blc tio or

n e furt her a sist an e, ple s c nt act h Cu t omer Serv ic

Ce t re:c c@ie c

A pro os de l'IEC

L Commis io Ele trote h iq e Inter natio ale (IEC) e t la premièr e orga is tio mo diale q i éla or e et p ble d s

Norme internatio ale p ur to t c q i a trait à léle tri ité,à léle tr oniq e et a x te h olo ie a p re té s

A pro os de p blc t i ns IEC

L c nte u te h iq e d s p blc tio s IEC e t c n tamme t rev Ve i e v u a s r er q e v u p s é e lé itio la

plu r éc nte, u c r rig n um o ame d me t p ut a oir été p blé

Cat alo ue IEC - webst ore.e ch/ cat alo ue

Applc t io a t on me p ur c n ult er t ou le re s ig eme t s

biblo ra hiq e s r le Norme intern t io ale ,

Sp cific t io s t ec niq e , R ap ort s te h iq e et a tre

d c me ts d l EC Dis o ible p ur P , Ma OS, t ablett es

A ndroid et iPa

Recherche de p blc t i ns IEC - w ww ie ch/ se rch u

L re h rc e avan é p rmet d t ro ver d s p blc tio s IEC

e uti s nt difére t s crit ère (n méro d référe c , t exte,

c mit é d’ét ud s,…) Ele d n e a s i d s informatio s s r le

projets et le p blc t io s remplac ée o retiré s

IEC Just P blshed - webst ore.e ch/ just pu lshed

R este informé s r le n uvele p blc t io s IEC Ju t

Pu ls e d tai e le n uv ele p blc t io s p ru s

Dis o ible e lg e et a s i u e fois p r mois p r emai

Ele t ro edia - www.ele t ro edia.org

L premier dic t io n ire e lg e d t erme éle tro iq e et

éle triq e I c ntie t plu d 3 0 0 terme et d finit io s e

a glais et e fa ç is, ain i q e le terme é uiv ale t s d n

15 la g e a ditio n le Eg leme t a p lé Vo a ulaire

Elec trote h iq e Int ern tio al (IEV) e lg e

Glos aire IEC - st d.e c h/ glos ar y

Plu d 6 0 0 e t ré s t ermin lo iq e élec t rot ec niq e , e

a glais et e fa ç is, e traite d s art icle Terme et

Définit io s d s p blc tio s IEC p ru s d p is 2 0 Plu

c rt ain s e tré s a t érie re e traite d s p blc tio s d s

CE 3 , 7 , 8 et CISPR d l EC

Serv ic Clent s - w ebst ore.e c h/ cs

Si vou d sire n u d n er d s c mme taire s r c tt e

p blc t io o si v ou av ez d s q e t io s c nt ac t ez-n u :

FOREWORD 4

INTRODUCTION 6

1 Sco e 8

2 Normative ref eren es 8

3 Terms an def i ition 9

4 Ca le termination an internal con ection – Fixed an f re con ectors 9

5 Gau e 9

6 Characteristic 9

6.1 General 9

6.1.1 Overview 9

6.1.2 Pin an p ir groupin as ig ment 9

6.1.3 Clas ification into clmatic category 9

6.2 Electrical c aracteristic 10 6.2.1 General 10 6.2.2 Tran fer imp dan e 10 6.3 Tran mis ion c aracteristic 10 6.3.1 General 10 6.3.2 In ertion los 10 6.3.3 Return los 1

0 6.3.4 Pro agation delay 1

6.3.5 Delay s ew 1

6.3.6 NEXT los 1

6.3.7 Power s m NEXT los 1

6.3.8 FEXT L s 12

6.3.9 Power s m FEXT los 12

6.3.10 Tran verse con ersion los 12

6.3.11 Tran verse con ersion tran fer los 12

6.3.12 Coupl n at en ation 12

6.3.13 Power s m al en (exogenou ) NEXT 13

6.3.14 Power s m al en (exogenou ) FEXT 13

6.3.15 Mec anical 13

6.3.16 Pin as ig ment 13

7 Tests an test s hed le 14

7.1 General 14

7.2 Ar an ement f or contact resistan e test 14

7.3 Ar an ement for vibration test 14

7.4 Test proced res an me s rin method 14

7.5 Precon itionin 14

7.6 Wirin an mou tin of sp cimen 14

7.6.1 Wirin 14

7.6.2 Mou tin 14

8 Test s hed les 14

8.1 General 14

8.2 Basic (minimum) test s hed le 14

8.3 Ful test s hed le 14

INTERNATIONAL ELECTROTECHNICAL COMMISSION

_

Part 7-81: Detai specification for 8-way, shielded, f ree and fixed

connectors, f or data transmissions with frequencies up to 2 000 MHz

1 Th Intern tio al Ele trote h ic l Commis io (IEC) is a worldwid org niz tio for sta d rdiz tio c mprisin

al n tio al ele trote h ic l c mmite s (IEC Natio al Commite s) Th o je t of IEC is to promote

intern tio al c -o eratio o al q e tio s c n ernin sta d rdiz tio in th ele tric l a d ele tro ic f i ld To

this e d a d in a ditio to oth r a tivitie , IEC p bls e Intern tio al Sta d rd , Te h ic l Sp cif i atio s,

Te h ic l Re orts, Pu lcly Av ia le Sp cific tio s (P S) a d Guid s (h re f ter refer e to a “IEC

Pu lc tio (s)”) Th ir pre aratio is e tru te to te h ic l c mmite s; a y IEC Natio al Commite intere te

in th s bje t d alt with ma p rticip te in this pre aratory work Intern tio al g v rnme tal a d n n

-g v rnme tal org niz tio s laisin with th IEC als p rticip te in this pre aratio IEC c la orate clo ely

with th Intern tio al Org niz tio f or Sta d rdiz tio (ISO) in a c rd n e with c n itio s d termin d b

a re me t b twe n th two org niz tio s

2) Th f ormal d cisio s or a re me ts of IEC o te h ic l maters e pre s, a n arly a p s ible, a intern tio al

c n e s s of o inio o th rele a t s bje ts sin e e c te h ic l c mmite h s re re e tatio fom al

intere te IEC Natio al Commite s

3) IEC Pu lc tio s h v th form of re omme d tio s f or intern tio al u e a d are a c pte b IEC Natio al

Commite s in th t s n e Whie al re s n ble ef forts are ma e to e s re th t th te h ic l c nte t of IEC

Pu lc tio s is a c rate, IEC c n ot b h ld re p n ible for th wa in whic th y are u e or f or a y

misinterpretatio b a y e d u er

4) In ord r to promote intern tio al u if ormity, IEC Natio al Commite s u d rta e to a ply IEC Pu lc tio s

tra s are tly to th ma imum e te t p s ible in th ir n tio al a d re io al p blc tio s An div rg n e

b twe n a y IEC Pu lc tio a d th c re p n in n tio al or re io al p blc tio s al b cle rly in ic te in

th later

5) IEC its lf d e n t pro id a y ate tatio of c nf ormity In e e d nt c rtific tio b die pro id c nf ormity

a s s me t s rvic s a d, in s me are s, a c s to IEC mark of c nf ormity IEC is n t re p n ible f or a y

s rvic s c rie o t b in e e d nt c rtif i atio b die

6) Al u ers s o lde s re th t th y h v th late t e itio of this p blc tio

7) No la i ty s al ata h to IEC or its dire tors, emplo e s, s rv nts or a e ts in lu in in ivid al e p rts a d

memb rs of its te h ic l c mmite s a d IEC Natio al Commite s for a y p rs n l injury, pro erty d ma e or

oth r d ma e of a y n ture wh ts e er, wh th r dire t or in ire t, or for c sts (in lu in le al f ee ) a d

e p n e arisin o t of th p blc tio , u e of, or rela c u o , this IEC Pu lc tio or a y oth r IEC

Pu lc tio s

8) Ate tio is drawn to th Normativ refere c s cite in this p blc tio Us of th refere c d p blc tio s is

in is e s ble for th c r e t a plc tio of this p blc tio

International Stan ard IEC 6 6 3-7-81 has b en pre ared by s bcommit e 4 B: Electrical

con ectors, of IEC tec nical commit e 4 : Electrical con ectors an mec anical stru tures

f or electrical an electronic eq ipment

The text of this stan ard is b sed on the f ol owin doc ments:

Ful inf ormation on the votin f or the a proval of this stan ard can b foun in the re ort on

votin in icated in the a ove ta le

This publ cation has b en draf ted in ac ordan e with the ISO/IEC Directives, Part 2

A l st of al p rts in the IEC 6 6 3 series, publ s ed u der the general title Co n ct ors for

ele tro ic e uipme t, can b f ou d on the IEC we site

The commit e has decided that the contents of this publ cation wi remain u c an ed u ti

the sta i ty date indicated on the IEC we site u der "ht p:/webstore.iec.c " in the data

related to the sp cif i publ cation At this date, the publ cation wi b

• reconfirmed,

• with rawn,

• re laced by a revised edition, or

IEC 6 6 3-7 is the b se sp cification of the whole series Subseq ent sp cif i ation do not

d pl cate inf ormation given in the b se doc ment, but l st only ad itional req irements For

complete sp cification regardin a comp nent of a hig er n mb r doc ment al lower

n mb red doc ments s al b con idered as wel The fol owin diagram s ows the

inter elation of the doc ments:

The International Electrotec nical Commis ion (IEC) draws at ention to the fact that it is

claimed that compl an e with this doc ment may in olve the u e of a p tent con ernin

tran mis ion c aracteristic given in 6.2

dime sio s, me h nic l a d

ele t ric l c arac t erist ic , t ests

a d t est s h d leKey

IE

IEC takes no p sition con ernin the eviden e, val dity an s o e of this p tent rig t.

The holder of this p tent rig t has as ured the IEC that he/s e is wi in to negotiate l cen es

either fe of c arge or u der re sona le an non-dis riminatory terms an con ition with

a pl cants throu hout the world In this resp ct, the statement of the holder of this p tent

rig t is registered with IEC Information may be o tained f rom:

CommSco e INC of North Carol na

1 0 CommSco e Place SE

Hic ory North Carol na USA 2 6 2

Atention is drawn to the p s ibi ty that some of the elements of this doc ment may b the

s bject of p tent rig ts other than those identified a ove IEC s al not b held resp n ible for

identifyin an or al s c p tent rig ts

ISO (www.iso.org/p tents) an IEC (htp:/p tents.iec.c ) maintain on-l ne data b ses of

p tents relevant to their stan ard Users are en ouraged to con ult the data b ses f or the

most up to date information con ernin p tents

CONNECTORS FOR ELECTRONIC EQUIPMENT –

Part 7-81: Detai specification for 8-way, shielded, f ree and fixed

connectors, f or data transmissions with frequencies up to 2 000 MHz

This p rt of IEC 6 6 3 covers 8-way, s ielded, f re an fixed con ectors, ref eren es

dimen ional, mec anical, electrical an en ironmental c aracteristic an tests in

IEC 6 6 3-7, an sp cifies electrical tran mis ion req irements, in lu in p wer s m alen

(ex ogenou ) cros t alk, for f req en ies up to 2 0 0 MHz

These con ectors are typical y u ed as “category 8.1” con ectors in “clas I” ca l n s stems

sp cified in ISO/IEC 1 8 1

These con ectors are intermate ble an intero era le with other IEC 6 6 3-7 series

con ectors as defined in Clau e 2 of IEC 6 6 3-7

These con ectors are b c ward comp tible with other IEC 6 6 3-7 series con ectors, ex e t

IEC 6 6 3-7-7 an IEC 6 6 3-7-71 con ectors

NOT Tra smis io p rf orma c c te orie : in this IEC sta d rd, th term “c te ory”, wh n u e in refere c to

tra smis io p rorma c , ref ers to th s c te orie d f i e b ISO/IEC 1 8 1

The f ol owin doc ments, in whole or in p rt, are normatively ref eren ed in this doc ment an

are in isp n a le for its a pl cation For dated referen es, only the edition cited a ples For

u dated referen es, the latest edition of the referen ed doc ment (in lu in an

amen ments) a pl es

IEC 6 512-2-1, Co n ct ors for electro ic e uipme t – Tests a d me sureme ts – P art 2-1:

Ele tric l c nt in ity a d c ntact resistan e t ests – Test 2 : Co ta t resistan e – Milliv lt lev l

met hod

IEC 6 512-2 -9, Co n ct ors for electro ic e uipme t – Tests a d me sureme ts – P art 25-9:

Sig al int egrity t ests – Test 25i Alien cros talk

IEC 6 512-2 -10 , Co n ct ors for electro ic e uipme t – Tests a d me sureme ts –

P art 2 -10 : Measureme t setup, test a d refere c ara g me ts a d me sureme ts for

c n e tors a c rdin to IEC 6 6 3-7 – Tests 2 a to 2 g

IEC 6 512-2 -10 : (2

n

edition u der con ideration) Co n ctors for ele tro ic e uipme t –

Tests a d me sureme ts – P art 2 -10 : Sign l inte rity t ests u to 2 0 0 MHz o

I EC 6 6 3-7 a d IEC 6107 6-3 series c n e tors –Tests 2 a to 2 g

IEC 6 6 3-7:2 0 , Co n ctors for electro ic e uipme t – P art 7 : Detai sp cific tio for

8-wa , u shield ed , fe a d fix ed c n e tors

IEC 6 6 3-7-1:2 1 , Co n ctors for ele tro ic e uipme t – P art 7-1: Det ai sp cific tion for

8-wa , shielded , fe a d fix d c n e t ors

IEC 61 5 (al p rts), Mult ic re a d symmetric l p irq ad c bles for d igit al c mmu ic tions

IEC 6 15 -4-15: Metallic c mmu ic t ion c ble test met hods – P art 4-15: Ele troma n t ic

at te u tio or c u li g atte u tio wit h triaxial c ll

1

3 Terms and def initions

For the purp ses of this doc ment, the terms an def i ition of Clau e 2 of IEC 6 6 3-7,

a ply as wel as the fol owin

3.1

ba kward compatibi ity

a set of req irements en urin that a fe or fixed con ector whic is in compl an e with this

stan ard, mated with a fixed or fe con ector in compl an e with any lower feq en y

IEC 6 6 3-7 series con ector, f ul y compl es with the req irements of the lower feq en y

IEC 6 6 3-7 series con ector, ex e t 6 6 3-7-7 an 6 6 3-7-71

Note 1 to e try: Th c mplete s e ific tio of th c te orie a d th b c ward c mp tibi ty s stem for th

IEC 6 6 3-7 s rie c n e tors, wh n u e in sta d rd ISO/IEC 1 8 1 1 b la c d c bln s stems, is s e if i d in

ref ere c d ISO/IEC 1 8 1 1

Se Clau e 3 of IEC 6 6 3-7-1:2 1 for dimen ion , views an req irements

4 Cable terminations and internal connections – Fixe and f ree connectors

Se Clau e 4 of IEC 6 6 3-7-1:2 1 for ca le termination an internal con ection typ s

6.2 Ele tric l c ara teristic

In ad ition to 6.2.1, the tran fer imp dan e of con ectors conf ormin to this stan ard s al

me t the folowin req irements

Con ition :

When tested ac ordin to IEC 6 512-2 -10 , Test 2 e, mated con ectors, terminated with

e c ca le typ (e.g F/UTP, S/FTP) inten ed to b u ed f or these con ectors s al not s ow

hig er mag itu e of tran f er imp dan e as given by f ormula:

Compl an e to this stan ard in resp ct to tran mis ion c aracteristic , is determined

ac ordin to sp cific test method des rib d in test group EP, se Ta le 1 The

intero era i ty of connectors complant to this stan ard s al b demon trated by testin the

fixed con ectors with the ful ran e of f re con ectors ac ordin to IEC 6 512-2 -10

Compl an e to this stan ard in resp ct to the al en (exogenou ) cros talk is determined

ac ordin to sp cif i test method des rib d in IEC 6 512-2 -9

Al tran mis ion p r orman e req irements a ply b twe n the ref eren e planes sp cif ied in

The pro agation delay test do s not ne d to b p rormed, sin e it is as umed that

con ectors comply by desig

Al p ir combination : ≤ 1,2 n

This c aracteristic is calc lated f rom the in ivid al pro agation delay me s rements

an , as with pro agation delay (6.3.4), it is as umed that con ectors comply by

10

10log

10

Al p irs: ≥ 9 -2 log (f) dB f rom 1 MHz to 2 0 MHz

Al p irs: ≥ 4 ,0 -3 log (f/250) dB f rom 2 0 MHz to 5 0 MHz

Al p irs: ≥ 3 ,0-4 log (f/50 ) dB f rom 5 0 MHz to 2 0 0 MHz

This c aracteristic is calc lated f rom the in ivid al FEXT los me s rements an

con ector compl an e is ac ieved by compl an e to the FEXT los req irements

This c aracteristic is given for information only

10

10log

10

Al p irs: ≥ 8 ,1-2 log (f) dB f om 1 MHz to 2 0 0 MHz

This c aracteristic is calc lated f rom the in ivid al FEXT los me s rements an

con ector compl an e is ac ieved by compl an e to the FEXT los req irements

Mated con ectors, terminated with e c ca le con tru tion typ inten ed to b al owed

f or these connectors

Al typ s: ≥ 8 – 0log (f/10 ) dB, f rom 3 MHz to 2 0 0 MHz

Whenever the formula res lts in a value gre ter than 8 dB, the req irement s al

revert to 8 dB

The coupl n aten ation req irement is as umed to b fulf il ed when the tran fer imp dan e

an u b lan e at en ation ( ran verse con ersion los an tran verse con ersion tran fer

los ) req irements are met on the ful b n width

The coupl n at en ation requirement is as umed to b fulf il ed when the tran fer imp dan e

an u b lan e at en ation ( ran verse con ersion los an tran verse con ersion tran f er

los ) req irements are met on the f ul b n width

The PS AFEXT req irements are f ulfi ed when the coupl n aten ation is verified an it is

10 dB b ter than the PS ANEXT an the PS AACR-F minimum req irements

110

1

10log

110

1

10log

k

PS

7 Tests and test schedule

Wirin of these con ectors s al take into ac ou t the wire an ca le diameter of the ca les

defined in the IEC 61 5 series as given in the man f acturer’s sp cif i ation

In ad ition to the test s hed le of IEC 6 6 3-7-1, one f urther group of two sets of mated

con ectors is req ired for group EP, whic is s own in Ta le 1 The f re con ectors f or group

EP s al ad itional y me t the req irements of IEC 6 512-2 -10 an IEC 6 512-2 -9

Ad itional sets of con ectors are req ired for the al en (exogenou ) NEXT an FEXT (EP10

an EP1 ) me s rements ac ordin to IEC 6 512-2 -9

8.3.2 Te t group P prel minary

Al the test group sp cimen s al b s bjected to the prel minary group P of IEC 6 6 3-7 an

the prel minary group P of IEC 6 6 3-7-1

8.3.8 Te t group FP

Se 7.7.2.8 of IEC 6 6 3-7:2 0

8.3.9 Te t group GP

Se 7.7.2.9 of IEC 6 6 3-7-1:2 1

Bibl ogr aphy

IEC 6 6 3-7-2:2 10, Co n ctors for electro ic e uipme t – P art 7-2: Detai sp cific tion for

8-wa , u shielded , fe a d fix ed c n e t ors, for d at a tra smis ions with fe u n ies u t o

IEC 6 6 3-7-3:2 10, Co n ctors for electro ic e uipme t – P art 7-3: Detai sp cific tion for

8-wa , shield ed, fe a d fix d c n e tors, for d ata tra smis io with fe u n ies u t o

IEC 6 6 3-7-4:2 10, Co n ctors for electro ic e uipme t – P art 7-4: Detai sp cific tion for

8-wa , unshielded , fe a d fix ed c n e tors, for d ata tra smis ions wit h fe u n ies u to

250 MHz

IEC 6 6 3-7-41:2 10, Co n ct ors for electro ic e uipme t – P art 7-41: Deta sp cific t ion

for 8-wa , u shield ed , fe a d fix d c n e tors, for d ata tra smis io s wit h fe u n ies u

to 50 MHz

IEC 6 6 3-7-51:2 10, Co n ct ors for electro ic e uipme t – P art 7-51: Deta sp cific t ion

for 8-wa , shielded , fe a d fix ed c n e t ors, for data tra smis ions wit h fe u n ies u t o

IEC 6 6 3-7-7:2 10, Co n ctors for electro ic e uipme t – P art 7-7 : Detai sp cific tion for

8-wa , shielded, fe a d fix d c n e tors for d ata tra smis io wi th fe u n ies u t o

6 0 MHz

IEC 6 6 3-7-71:2 10, Co n ct ors for electro ic e uipme t – P art 7-7 1: Deta sp cific t ion

for 8-way, shielded , fe a d fix ed c n e tors, for data tra smis io with fe u n ies u t o

1 0 0 MHz

IEC 6 15 -4-12, Met allic c mmu ic tion c ble test meth ds – P art 4-12: Ele troma netic

Comp tibility (EMC) – Co p n atte u tion or scre nin att en at io of c n e ting h rdware

– Absorbing clamp met hod

NOT Th a o e d c me t is d fin d u to 1 GHz IEC TC4 /WG5 is re u ste to re is it to 2 GHz

ISO/IEC TR 1 8 1-9 01, I nformat ion t ec n lo y – Ge eric c b n for c stomer premises –

P art 9 01: Guida c for b lan ed c bling in su p rt of at least 4 Gbit/s d at a tra smis io

_