NORME INTERNATIONALE INTERNATIONAL STAN DARD CEI IEC 60096 2 1988 AMENDEMENT 1 AMENDMENT 1 1990 01 Amendement 1 Câbles pour fréquences radioélectriques Deuxième partie Spécifications particulières de[.]
Trang 1INTERNATIONALE
INTERNATIONAL
CEI IEC
60096-2
1988
AMENDMENT 1
1990-01
Amendement 1
Câbles pour fréquences radioélectriques
Deuxième partie:
Spécifications particulières de câbles
Amendment 1
Radio-frequency cables
Part 2:
Relevant cable specifications
© IEC 1990 Droits de reproduction réservés — Copyright - all rights reserved
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
Commission Electrotechnique Internationale
International Electrotechnical Commission
Mentinmapoil HaR 3neKrporexHH4ecnaR HOMHCCHfl
CODE PRIX PRICE CODE
Pour prix, voir catalogue en vigueur
Trang 2- 2 - 96-2 mod 1 © CEI
PREFACE
La présente modification a été établie par le Sous-Comité 46A: Câbles
coaxiaux, du Comité d'Etudes n° 46 de la CEI: Câbles, fils, guides
d'ondes, connecteurs, et accessoires pour communications et signalisation
Le texte de cette modification est issu des documents suivants:
Le rapport de vote indiqué dans le tableau ci-dessus donne toute
information sur le vote ayant abouti à l'approbation de cette modification
La version consolidée de la Publication 96-2 (1988) comprend les câbles
96 CEI-50-7-4 et 96 CEI-50-7-6, tandis que la Publication 96-2 (1961)
comprend les câbles 96 CEI-50-7-4 et la Publication 96-2A (1965) comprend
les câbles 96 CEI-50-7-6
Pour les câbles 96 CEI-50-7-4 et 96 CEI-50-7-6:
Dans la section 2: Essais électriques, sous "Affaiblissement", dans la
colonne "max.", remplacer la valeur "0,55" par "0,62"
Trang 396-2 Amend 1 © IEC - 3
PREFACE
This amendment has been prepared by Sub-Committee 46A: Coaxial
cables, of IEC Technical Committee No 46: Cables, wires, waveguides,
R.F connectors, and accessories for communication and signalling
The text of this amendment is based on the following documents:
Six Months' Rule Report on Voting
Full information on the voting for the approval of this amendment can be
found in the Voting Report indicated in the above table
Both cables 96 IEC-50-7-4 and 96 IEC-50-7-6 are included in the
conso-lidated version of Publication 96-2 (1988), whereas Publication 96-2 (1961)
deals with cable 96 IEC-50-7-4 and Publication 96-2A (1965) with cable 96
IEC-50-7-6
For cable 96 IEC-50-7-4 and cable 96 IEC-50-7-6:
In section 2: Electrical tests, under "Attenuation", in the requirements
column headed "max." delete the value "0.55" and substitute the value
"0.62"
Trang 4ICS 33.120.10
Typeset and printed by the IEC Central Office GENEVA, SWITZERLAND