Bsi bs en 03660 025 2013

BSI Standards PublicationAerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors Part 025: Cable outlet, style A, straight, unsealed,

BSI Standards Publication

Aerospace series — Cable outlet accessories for circular and rectangular electrical

and optical connectors

Part 025: Cable outlet, style A, straight, unsealed, with cable tie strain relief for

EN 3646 — Product standard

This British Standard is the UK implementation of EN 3660-025:2013

It supersedes BS EN 3660-025:2009, which is withdrawn

The UK participation in its preparation was entrusted to Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology

A list of organizations represented on this committee can be obtained on request to its secretary

This publication does not purport to include all the necessary provisions of a contract Users are responsible for its correct application

© The British Standards Institution 2013

Published by BSI Standards Limited 2013

ISBN 978 0 580 80149 5 ICS 49.060

Compliance with a British Standard cannot confer immunity from legal obligations.

This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2013

Amendments issued since publication

NORME EUROPÉENNE

English Version Aerospace series - Cable outlet accessories for circular and

rectangular electrical and optical connectors - Part 025: Cable

outlet, style A, straight, unsealed, with cable tie strain relief for

EN 3646 - Product standard

Série aérospatiale - Accessoires arrière pour connecteurs

circulaires et rectangulaires électriques et optiques - Partie

025: Raccord, droit, type A, non étanche, avec tenue du

câble par frettage pour EN 3646 - Norme de produit

Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 025: Endgehäuse, Bauform A, gerade, nicht abgedichtet, mit Arm für Kabelbinder für EN 3646 - Produktnorm

This European Standard was approved by CEN on 27 October 2012

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member

This European Standard exists in three official versions (English, French, German) A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom

EUROPEAN COMMITTEE FOR STANDARDIZATION

C O M I T É E U R O P É E N D E N O R M A L I S A T I O N

E U R O P Ä I S C H E S K O M I T E E FÜ R N O R M U N G

Management Centre: Avenue Marnix 17, B-1000 Brussels

Contents Page

Foreword 3

1 Scope 4

2 Normative references 4

3 Terms and definitions 4

4 Characteristics 4

5 Identification 10

6 Marking 11

7 Technical specification 11

Foreword

This document (EN 3660-025:2013) has been prepared by the Aerospace and Defence Industries Association

of Europe - Standardization (ASD-STAN)

After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN

This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2013, and conflicting national standards shall be withdrawn at the latest by July 2013

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights This document supersedes EN 3660-025:2009

According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom

1 Scope

This European Standard defines a range of cable outlets, straight, style A, for use under the following conditions:

Associated electrical connector(s) : EN 3660-002

Temperature range, Class A : − 65 °C to 200 °C

Class N : − 65 °C to 200 °C

Class W : − 65 °C to 175 °C

2 Normative references

The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application For dated references, only the edition cited applies For undated references, the latest edition of the referenced document (including any amendments) applies

EN 2591-100*, Aerospace series — Elements of electrical and optical connection — Test methods — Part 100:

General

EN 3660-001, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical

connectors — Part 001: Technical specification

EN 3660-002, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical

connectors — Part 002: Index of product standards

EN 3660-036, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical

connectors — Part 036: Spacer pad for cable outlet, style Z — Product standard

3 Terms and definitions

For the purposes of this document, the terms and definitions given in EN 3660-001 apply

4 Characteristics

4.1 Dimensions and mass

For dimensions and mass, see Figure 1 and Table 1

For interface dimensions, see 4.3

All dimensions are in millimetres

* All parts quoted in this standard

Detail A

Key

1 Area for marking (see Clause 6)

2 Knurled, manufactures option

3 Area for cable tie or lacing cord

4 Three off wire lock holes equi-spaced for 0,8 mm max diameter wire

5 A-Thread (see Table 1)

6 6,0 nom

Figure 1 Table 1

Shell

size

A

Thread Class 2B

Radius

spacer pad Classes

A, N and W

max − 0,560 max ± 0,8 ± 0,8 max

08 0.500-20UNF

30,3

7,75

14 0.875-20UNEF

a “C” dimension is taken when the coupling nut is pulled in forward position

4.2 Component parts

Spacer pad, see EN 3660-036

4.3 Interface dimensions

4.3.1 Associated connectors

See EN 3660-002

4.3.2 Interface

See Figures 2 and 3 and Table 2

All dimensions are in millimetres

Key

1 N number of teeth, see Table 2

2 4,95 mm min penetration of Z diameter measured from front of teeth

Table 2

Shell

size

W X Y Z N

Number

of teeth

+ 0,64

0 − 0,38 0 + 0,38

0 − 0,25 0

mm mm mm mm

08 12,70 9,14 7,59 6,86 12

12 19,05 15,49 13,94 12,98 21

14 22,23 18,67 17,12 14,86 24

16 25,40 21,84 20,29 18,03 30

18 26,97 23,27 22,07 20,04 33

20 30,18 26,44 25,25 23,22 36

22 33,32 29,62 28,42 26,39 39

24 36,53 32,79 31,60 29,31 42

4.4 Material and finish

Cable outlet: Material/Finish Class A : Aluminium/black anodized

Material/Finish Class N : Aluminium/electroless nickel plated

Material/Finish Class W : Aluminium/olive drab cadmium plated

4.5 Assembly torque

These torque values are intended for installation use only See Table 3

Table 3 Shell size

Torque

Nm

± 0,5

08

4,5

10

12

14

16

18

20

9,0

22

24

4.6 Coupling thread strength torque

These torque values are for test purposes, see EN 2591-420 and Table 4

Table 4 Shell size

Torque

Nm

± 0,5

08

5,5

10

12

14

16

18

20

11,0

22

24

4.7 Tests

Test details to be in accordance with Table 5, EN 3660-001 and EN 2591-100 Qualification to be in accordance with EN 3660-001

Table 5 (1 of 2)

EN 2591- Designation on the test applicable Not

Applicable see

102 Examination of dimensions

205 Housing (shell) electrical

212 Surface transfer impedance

305 Rapid change of temperature X —

connector and suspended with non-metallic cord

Duration:

Classes A and N 48 h Class W 500 h

314 Immersion at low air pressure X —

315 Fluid resistance X For variant A only

Severity 100 g Number of shocks: 6 (six)

1 (one) in each direction in

3 (three) perpendicular axes

403 Sinusoidal and random

vibration X Method Figure 3 Table 2 Level J B

Duration:

8 (eight) h at ambient temperature

408 Mating and unmating forces X —

Table 5 (2 of 2)

EN 2591- Designation on the test applicable Not Applicable see

EN 3660-001

Details

420 Mechanical strength of rear

Shell size Load

N max

Phase D and Table 4

422 Locking wire hole strength X —

513 Magnetic permeability X Not fitted to a connector

Max values Classes A, N and W 2,0

a 1 GHz to 10 GHz under consideration.

5 Identification

EXAMPLE 1

Description block CABLE OUTLET

Identity block EN3660-025XXXX

Number of this standard

Material/Finish class (see 4.4)

Shell size

Nothing = without spacer pad

A = with spacer pad

EXAMPLE 2 EN3660-025N08A Cable outlet, style A, aluminium/electroless nickel plated, shell size 08, with

spacer pad

NOTE 1 No gaps are required between sections in the part number when printed

NOTE 2 If necessary, the code I9005 shall be placed between the description block and the identity block

6 Marking

Refer to EN 3660-001

7 Technical specification

Refer to EN 3660-001

BSI is the national body responsible for preparing British Standards and other

standards-related publications, information and services.

BSI is incorporated by Royal Charter British Standards and other standardization products are published by BSI Standards Limited.

British Standards Institution (BSI)

BSI Group Headquarters

389 Chiswick High Road London W4 4AL UK

About us

We bring together business, industry, government, consumers, innovators

and others to shape their combined experience and expertise into standards

-based solutions.

The knowledge embodied in our standards has been carefully assembled in

a dependable format and refined through our open consultation process

Organizations of all sizes and across all sectors choose standards to help

them achieve their goals.

Information on standards

We can provide you with the knowledge that your organization needs

to succeed Find out more about British Standards by visiting our website at

bsigroup.com/standards or contacting our Customer Services team or

Knowledge Centre.

Buying standards

You can buy and download PDF versions of BSI publications, including British

and adopted European and international standards, through our website at

bsigroup.com/shop, where hard copies can also be purchased

If you need international and foreign standards from other Standards Development

Organizations, hard copies can be ordered from our Customer Services team.

Subscriptions

Our range of subscription services are designed to make using standards

easier for you For further information on our subscription products go to

bsigroup.com/subscriptions.

With British Standards Online (BSOL) you’ll have instant access to over 55,000

British and adopted European and international standards from your desktop

It’s available 24/7 and is refreshed daily so you’ll always be up to date

You can keep in touch with standards developments and receive substantial

discounts on the purchase price of standards, both in single copy and subscription

format, by becoming a BSI Subscribing Member

PLUS is an updating service exclusive to BSI Subscribing Members You will

automatically receive the latest hard copy of your standards when they’re

revised or replaced

To find out more about becoming a BSI Subscribing Member and the benefits

of membership, please visit bsigroup.com/shop.

With a Multi-User Network Licence (MUNL) you are able to host standards

publications on your intranet Licences can cover as few or as many users as you

wish With updates supplied as soon as they’re available, you can be sure your

documentation is current For further information, email bsmusales@bsigroup.com.

Revisions

Our British Standards and other publications are updated by amendment or revision

We continually improve the quality of our products and services to benefit your business If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.

Copyright

All the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person

or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system

or transmitted in any form or by any means – electronic, photocopying, recording

or otherwise – without prior written permission from BSI Details and advice can

be obtained from the Copyright & Licensing Department.

Useful Contacts:

Customer Services Tel: +44 845 086 9001 Email (orders): orders@bsigroup.com Email (enquiries): cservices@bsigroup.com Subscriptions

Tel: +44 845 086 9001 Email: subscriptions@bsigroup.com Knowledge Centre

Tel: +44 20 8996 7004 Email: knowledgecentre@bsigroup.com Copyright & Licensing

Tel: +44 20 8996 7070 Email: copyright@bsigroup.com