Copyright by the American Petroleum Institute Wed May 10 20 32 18 2006 Copyright by the American Petroleum Institute Wed May 10 20 32 25 2006 Data Supplied By API Monogram Licensed Mills Worldwide (in[.]
Trang 1Copyright by the American Petroleum Institute Wed May 10 20:32:18 2006
Trang 2Copyright by the American Petroleum Institute Wed May 10 20:32:25 2006
Trang 3Data Supplied By API Monogram Licensed Mills Worldwide
(in Metric Tonnes) Issued by:
American Petroleum lnstitute Upstream Segment
1220 L Street, Northwest Washington, DC 20005-4070
Phone (202) 682-8375 Fax (202) 962-4776
Compiled by:
Preston Publishing Company, Inc
621 Moody, Ste 104 Galveston, TX 77550 Tel: (409) 750-8800 Fax: (409) 750-8885
All rights resewed No part of this work may be repmduced, stored in a retrzeval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, withoutpnor written permission from the publisher Contact the Publishel; APZ Publzshzng Sewzces, 1220 L Street, N W , Washzngton, D C 20005
Copyright O 2002 American Petroleum Institute
Copyright by the American Petroleum Institute
Wed May 10 20:32:25 2006
Trang 4Copyright by the American Petroleum Institute Wed May 10 20:32:26 2006
Trang 5TONNAGE OF CASING SHIPPED -WORLDWIDE
(Including Casing Liners)
(in Metric Tonnes)
High
(mm) (Iblff) (kdm) (mm) H40 K55 N80 M65 L80 (a) (a) C90 C95 T95 (b) PI10 Q125 (c) Other GRADES
TOTAL TONS PER SIZE: 0 33,873 24,876 0 9,079 3,386 0 2,397 147 129 161 18,749 186 2,278 7,711 102,971
TOTAL TONS PER SIZE: 0 730 6,661 0 3,956 2,011 0 0 15 352 0 5,604 11 698 1,475 21,513
NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT
(a) Weights are not applicable for L80 and L85 13Cr grades
(b) 95.000 psi minimum yield strength casing manufactured to meet collapse pressures higher than that for Grade C95 casing of the same size and thickness
(c) Other Restricted Yield Strength Grades Includes any grade with a specified yield strength range of 20,000 psi or less which is not included in the table
Copyright by the American Petroleum Institute
Wed May 10 20:32:26 2006
Trang 6TONNAGE OF CASING SHIPPED -WORLDWIDE
(Including Casing Liners)
(in Metric Tonnes)
High
(In.) (IbKt) (Iblft) (In.) H40 K55 N80 M65 L80 (a) (a) C90 C95 T95 (b) PI10 Q125 (c) Other GRADES
TOTAL TONS PER SIZE: 0 33,873 24,876 0 9,079 3,386 0 2,397 147 129 161 18,749 186 2,278 7,711 102,971
TOTAL TONS PER SIZE: 0 730 6,661 0 3,956 2,011 0 0 15 352 0 5,604 11 698 1,475 21,513
NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT
(a) Weights are not applicable for L80 and L85 13Cr grades
(b) 95.000 psi minimum yield strength casing manufactured to meet collapse pressures higher than that for Grade C95 casing of the same size and thickness
(c) Other Restricted Yield Strength Grades Includes any grade with a specified yield strength range of 20,000 psi or less which is not included in the table
Copyright by the American Petroleum Institute
Wed May 10 20:32:26 2006
Trang 7SIZE NOMINAL PLAIN END WALL L80 L85 Collapse Other TOTAL
(mm) (Ibm) (kdm) (mm) H40 K55 N80 M65 L80 (a) (a) C90 C95 T95 (b) PI10 Q125 (c) Other GRADES
TOTAL TONS PER SIZE: 6,029 308,806 235.618 0 23.121 12,337 0 823 1,720 34 352 87,461 437 9,303 4,217 692,258
TOTAL TONS PER SIZE: 222 8,983 842 0 9,866 1.364 0 0 1,252 0 0 3,270 0 2,561 44.010 72,370
NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT
(a) Weights are not applicable for L80 and L85 13Cr grades
(b) 95,000 psi minimum yield strength casing manufactured to meet collapse pressures higher than that for Grade C95 casing of the same size and thickness
(c) Other Restricted Yield Strength Grades Includes any grade with a specified yield strength range of 20,000 psi or less which is not included in the table
Copyright by the American Petroleum Institute
Wed May 10 20:32:26 2006
Trang 8SIZE NOMINAL PLAIN END WALL L80 L85 Collapse Other TOTAL
(In.) (Ib/ft) (Iblft) (In.) H40 K55 N80 M65 L80 (a) (a) C90 C95 T95 (b) PI10 Q125 (c) Other GRADES
TOTAL TONS PER SIZE: 6,029 308,806 235.618 0 23.121 12,337 0 823 1,720 34 352 87,461 437 9,303 4,217 692,258
TOTAL TONS PER SIZE: 222 8,983 842 0 9,866 1.364 0 0 1,252 0 0 3,270 0 2,561 44.010 72,370
NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT
(a) Weights are not applicable for L80 and L85 13Cr grades
(b) 95,000 psi minimum yield strength casing manufactured to meet collapse pressures higher than that for Grade C95 casing of the same size and thickness
(c) Other Restricted Yield Strength Grades Includes any grade with a specified yield strength range of 20,000 psi or less which is not included in the table
Copyright by the American Petroleum Institute
Wed May 10 20:32:26 2006
Trang 9SIZE NOMINAL PLAIN END WALL L80 L85 Collapse Other TOTAL
(mm) (Ibm) (kdm) (mm) H40 K55 N80 M65 L80 (a) (a) C90 C95 T95 (b) PI10 Q125 (c) Other GRADES
23.00 33,70 8,05 0 30,660 35,667 0 3,026 0 0 0 0 363 2,621 0 1,953 2,978 77,267 26.00 38.21 9,19 0 18,230 34.828 0 18.606 6.520 4 0 198 37 0 18,820 0 3,297 13.300 111,840 29.00 42.78 10,36 0 10,444 34,247 0 43,758 5,838 0 0 1,173 257 1,991 20,106 0 3,692 6,452 127,959 32.00 47,20 11,51 0 4 542 0 7,082 8,416 0 0 473 1,197 1,216 11,304 217 3,912 2,503 36,865 35.00 51,52 12,65 0 2 313 0 311 0 29 0 389 0 59 1,153 104 2,161 366 4,886
TOTAL TONS PER SIZE: 0 61,457 105,597 0 72,783 20,774 33 65 2,234 1,491 3,628 52,102 415 15,032 25,598 361,207
TOTAL TONS PER SIZE: 0 1,006 3,886 0 1,655 1,062 0 891 284 29 0 5,500 774 2,483 31 17,601
NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT (a) Weights are not applicable for L80 and L85 13Cr grades
(b) 95,000 psi minimum yield strength casing manufactured to meet collapse pressures higher than that for Grade C95 casing of the same size and thickness
(c) Other Restricted Yield Strength Grades Includes any grade with a specified yield strength range of 20,000 psi or less which is not included in the table
Copyright by the American Petroleum Institute
Wed May 10 20:32:26 2006
Trang 10SIZE NOMINAL PLAIN END WALL L80 L85 Collapse Other TOTAL
(In.) (Ib/ft) (Iblft) (In.) H40 K55 N80 M65 L80 (a) (a) C90 C95 T95 (b) PI10 Q125 (c) Other GRADES
TOTAL TONS PER SIZE: 0 61,457 105,597 0 72,783 20,774 33 65 2,234 1,491 3,628 52,102 415 15,032 25,598 361,207
TOTAL TONS PER SIZE: 0 1,006 3,886 0 1,655 1,062 0 891 284 29 0 5,500 774 2,483 31 17,601
NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT
(a) Weights are not applicable for L80 and L85 13Cr grades
(b) 95,000 psi minimum yield strength casing manufactured to meet collapse pressures higher than that for Grade C95 casing of the same size and thickness
(c) Other Restricted Yield Strength Grades Includes any grade with a specified yield strength range of 20,000 psi or less which is not included in the table
Copyright by the American Petroleum Institute
Wed May 10 20:32:26 2006
Trang 13SIZE NOMINAL PLAIN END WALL L80 L85 Collapse Other TOTAL
(mm) (Ibm) (kdm) (mm) H40 K55 N80 M65 L80 (a) (a) C90 C95 T95 (b) PI10 Q125 (c) Other GRADES
TOTAL TONS PER SIZE: 0 36,524 98 0 9,360 1,674 0 1,153 283 319 29 2,174 2,599 2,722 1,405 58,339
NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT
(a) Weights are not applicable for L80 and L85 13Cr grades
(b) 95,000 psi minimum yield strength casing manufactured to meet collapse pressures higher than that for Grade C95 casing of the same size and thickness
(c) Other Restricted Yield Strength Grades Includes any grade with a specified yield strength range of 20,000 psi or less which is not included in the table
Copyright by the American Petroleum Institute
Wed May 10 20:32:26 2006
Trang 14SIZE NOMINAL PLAIN END WALL L80 L85 Collapse Other TOTAL
(In.) (Ib/ft) (Iblft) (In.) H40 K55 N80 M65 L80 (a) (a) C90 C95 T95 (b) PI10 Q125 (c) Other GRADES
TOTAL TONS PER SIZE: 0 36,524 98 0 9,360 1,674 0 1,153 283 319 29 2,174 2,599 2,722 1,405 58,339
NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT
(a) Weights are not applicable for L80 and L85 13Cr grades
(b) 95,000 psi minimum yield strength casing manufactured to meet collapse pressures higher than that for Grade C95 casing of the same size and thickness
(c) Other Restricted Yield Strength Grades Includes any grade with a specified yield strength range of 20,000 psi or less which is not included in the table
Copyright by the American Petroleum Institute
Wed May 10 20:32:26 2006
Trang 15SIZE NOMINAL PLAIN END WALL L80 L85 Collapse Other TOTAL
(mm) (Ibm) (kdm) (mm) H40 K55 N80 M65 L80 (a) (a) C90 C95 T95 (b) P l l O Q125 (c) Other GRADES 339.70 72.00 105,20 13,06 0 116 16.973 0 25.108 162 0 0 525 1,693 11,250 18,514 3,080 13,175 2,370 92,965
TOTAL TONS PER SIZE: 1,572 156,660 53,323 0 43,076 162 0 0 968 1,693 13,624 25,809 3,080 14,306 14,471 328,743
TOTAL TONS PER GRADE 14,422 849,939 588,107 913 352,211 45,072 33 5,991 19,777 12,975 24,302 334,827 12,821 74,617 546,141 2,882,146
NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT (a) Weights are not applicable for L80 and L85 13Cr grades
(b) 95,000 psi minimum yield strength casing manufactured to meet collapse pressures higher than that for Grade C95 casing of the same size and thickness
(c) Other Restricted Yield Strength Grades Includes any grade with a specified yield strength range of 20,000 psi or less which is not included in the table
Copyright by the American Petroleum Institute
Wed May 10 20:32:26 2006
Trang 16SIZE NOMINAL PLAIN END WALL L80 L85 Collapse Other TOTAL
(In.) (Ib/ft) (Iblft) (In.) H40 K55 N80 M65 L80 (a) (a) C90 C95 T95 (b) P l l O Q125 (c) Other GRADES
TOTAL TONS PER GRADE 14,422 849,939 588,107 913 352,211 45,072 33 5,991 19,777 12,975 24,302 334,827 12,821 74,617 546,141 2,882,146
NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT (a) Weights are not applicable for L80 and L85 13Cr grades
(b) 95,000 psi minimum yield strength casing manufactured to meet collapse pressures higher than that for Grade C95 casing of the same size and thickness
(c) Other Restricted Yield Strength Grades Includes any grade with a specified yield strength range of 20,000 psi or less which is not included in the table
Copyright by the American Petroleum Institute
Wed May 10 20:32:26 2006
Trang 17TONNAGE OF TUBING SHIPPED -WORLDWIDE
(in Metric Tonnes)
(rnrn) (Ibm) (kglrn) (rnrn) (a) H40 J55 N80 M65 L80 (b) (b) C90 T95 PI10 (c) Other GRADES 26.67 1.14 1,68 2,87 NUIOR
PE EUIOR
(c) Includes any other grade which has a specified yield strength range of 20,000 psi or less & not included in the table
Copyright by the American Petroleum Institute
Wed May 10 20:32:26 2006
Trang 18TONNAGE OF TUBING SHIPPED -WORLDWIDE
(in Metric Tonnes)
(In.) (Ibm) (Ib/ft) (In.) (a) H40 J55 N80 M65 L80 (b) (b) C90 T95 PI10 (c) Other GRADES
PE EUIOR
(c) Includes any other grade which has a specified yield strength range of 20,000 psi or less & not included in the table
Copyright by the American Petroleum Institute
Wed May 10 20:32:26 2006
Trang 19OD WEIGHT WEIGHT THICKNESS FINISH 13Cr 13Cr RY All ALL (rnrn) (Ibfi) (Wm) (rnrn) (a) H40 J55 N80 M65 L80 (b) (b) C90 T95 PI10 (c) Other GRADES
NUIOR
PE NUIOR EU8R
PE NU8R EUBR
PE
PE EU8R
PE
TOTAL TONS PER SIZE: 3,185 74,645 8,707 0 1,707 346 0 0 0 119 302 5,558 $4,569
NU NUIOR EU8R
PE NUIOR EU8R
PE
NUIOR EU8R
PE
PE
NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT (a) NU = Non Upset PE = Plain End 8R = 8 Round Thread EU = External Upset IJ = Integral Joint 10R = 10 Round Thread (b) Weights are not applicable for L80 and L85 13Cr grades
(c) Includes any other grade which has a specified yield strength range of 20,000 psi or less & not included in the table
Copyright by the American Petroleum Institute
Wed May 10 20:32:26 2006
Trang 20OD WEIGHT WEIGHT THICKNESS FINISH 13Cr 13Cr RY All ALL (In.) (Ib/ft) (Ib/ft) (In.) (a) H40 J55 N80 M65 L80 (b) (b) C90 T95 PI10 (c) Other GRADES
NUIOR
PE NUIOR EU8R
PE NUBR EUBR
PE
PE EUBR
PE
TOTAL TONS PER SIZE: 3,185 74,645 8,707 0 1,707 346 0 0 0 119 302 5,558 $4,569
NU NUIOR EUBR
PE NUIOR EU8R
PE NUIOR EUBR
PE
PE
NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT (a) NU = Non Upset PE = Plain End 8R = 8 Round Thread EU = External Upset IJ = Integral Joint 10R = 10 Round Thread (b) Weights are not applicable for L80 and L85 13Cr grades
(c) Includes any other grade which has a specified yield strength range of 20,000 psi or less & not included in the table
Copyright by the American Petroleum Institute
Wed May 10 20:32:26 2006
Trang 21OD WEIGHT WEIGHT THICKNESS FINISH 13Cr 13Cr RY All ALL (mm) (IbW (Wm) (mm) (a) H ~ O ~ 5 5 N ~ O ~ 6 5 LEO (b) (b) c 9 0 ~ 9 5 PIIO (c) Other GRADES
TOTAL TONS PER SIZE: 90 270,617 125,606 0 22,465 3,350 251 106 0 16,177 1,556 33,392 473,610
NUIOR
PE NUIOR EU8R
PE
PE
NUIOR
PE NU8R EU8R
PE
PE
PE
PE
TOTAL TONS PER SIZE: 0 57,892 26,423 0 33,875 3,471 356 928 3 9,799 8,153 22,275 163,174
NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT (a) NU = Non Upset PE = Plain End 8R = 8 Round Thread EU = External Upset IJ = Integral Joint 10R = 10 Round Thread (b) Weights are not applicable for L80 and L85 13Cr grades
(c) Includes any other grade which has a specified yield strength range of 20,000 psi or less 8 not included in the table
Copyright by the American Petroleum Institute
Wed May 10 20:32:26 2006
Trang 22OD WEIGHT WEIGHT THICKNESS FINISH 13Cr 13Cr RY All ALL (In.) (Ib/ft) (Ib/ft) (In.) (a) H40 J55 N80 M65 L80 (b) (b) C90 T95 PI10 (c) Other GRADES
TOTAL TONS PER SIZE: 90 270,617 125,606 0 22,465 3,350 251 106 0 16,177 1,556 33,392 473,610
NUIOR
PE NUIOR EU8R
PE
PE
NUIOR
PE NU8R EU8R
PE
PE
PE
PE
TOTAL TONS PER SIZE: 0 57,892 26,423 0 33,875 3,471 356 928 3 9,799 8,153 22,275 163,174
NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT (a) NU = Non Upset PE = Plain End 8R = 8 Round Thread EU = External Upset IJ = Integral Joint 10R = 10 Round Thread (b) Weights are not applicable for L80 and L85 13Cr grades
(c) Includes any other grade which has a specified yield strength range of 20,000 psi or less 8 not included in the table
Copyright by the American Petroleum Institute
Wed May 10 20:32:26 2006