Api Bull 5C2-1999 (American Petroleum Institute).Pdf

5C2/E21 Text Bulletin on Performance Properties of Casing, Tubing, and Drill Pipe API BULLETIN 5C2 TWENTY FIRST EDITION, OCTOBER 1999 Copyright American Petroleum Institute Reproduced by IHS under lic[.]

Bulletin on Performance Properties

of Casing, Tubing, and Drill Pipe

API BULLETIN 5C2 TWENTY-FIRST EDITION, OCTOBER 1999

Bulletin on Performance Properties

of Casing, Tubing, and Drill Pipe

Upstream Segment

API BULLETIN 5C2 TWENTY-FIRST EDITION, OCTOBER 1999

SPECIAL NOTES

API publications necessarily address problems of a general nature With respect to ular circumstances, local, state, and federal laws and regulations should be reviewed API is not undertaking to meet the duties of employers, manufacturers, or suppliers to warn and properly train and equip their employees, and others exposed, concerning health and safety risks and precautions, nor undertaking their obligations under local, state, or fed- eral laws.

partic-Information concerning safety and health risks and proper precautions with respect to ticular materials and conditions should be obtained from the employer, the manufacturer or supplier of that material, or the material safety data sheet.

par-Nothing contained in any API publication is to be construed as granting any right, by implication or otherwise, for the manufacture, sale, or use of any method, apparatus, or prod- uct covered by letters patent Neither should anything contained in the publication be con- strued as insuring anyone against liability for infringement of letters patent.

Generally, API standards are reviewed and revised, reaffirmed, or withdrawn at least every five years Sometimes a one-time extension of up to two years will be added to this review cycle This publication will no longer be in effect five years after its publication date as an operative API standard or, where an extension has been granted, upon republication Status

of the publication can be ascertained from the API Upstream Segment [telephone (202) 8000] A catalog of API publications and materials is published annually and updated quar- terly by API, 1220 L Street, N.W., Washington, D.C 20005.

682-This document was produced under API standardization procedures that ensure ate notification and participation in the developmental process and is designated as an API standard Questions concerning the interpretation of the content of this standard or com- ments and questions concerning the procedures under which this standard was developed should be directed in writing to the general manager of the Upstream Segment, American Petroleum Institute, 1220 L Street, N.W., Washington, D.C 20005 Requests for permission

appropri-to reproduce or translate all or any part of the material published herein should also be addressed to the general manager.

API standards are published to facilitate the broad availability of proven, sound ing and operating practices These standards are not intended to obviate the need for apply- ing sound engineering judgment regarding when and where these standards should be utilized The formulation and publication of API standards is not intended in any way to inhibit anyone from using any other practices.

engineer-Any manufacturer marking equipment or materials in conformance with the marking requirements of an API standard is solely responsible for complying with all the applicable requirements of that standard API does not represent, warrant, or guarantee that such prod- ucts do in fact conform to the applicable API standard.

All rights reserved No part of this work may be reproduced, stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission from the publisher Contact the Publisher, API Publishing Services, 1220 L Street, N.W., Washington, D.C 20005.

Copyright © 1999 American Petroleum Institute

perfor-Formulas and procedures for calculating the values are given in Bulletin 5C3 perfor-Formulas and calculations appearing in the 13th and preceding editions of Bull 5C2 were transferred in

1971 to Bull 5C3: Bulletin on Formulas and Calculations for Casing, Tubing, Drill Pipe, and Line Pipe Properties

API publications may be used by anyone desiring to do so Every effort has been made by the Institute to assure the accuracy and reliability of the data contained in them; however, the Institute makes no representation, warranty, or guarantee in connection with this publication and hereby expressly disclaims any liability or responsibility for loss or damage resulting from its use or for the violation of any federal, state, or municipal regulation with which this publication may conflict.

Suggested revisions are invited and should be submitted to the general manager of the Upstream Segment, American Petroleum Institute, 1220 L Street, N.W., Washington, D.C 20005.

iii

Page

Tables

1 Minimum Performance Properties of Casing 2

2 Performance Properties of Tubing 28

3 Minimum Performance Properties of Drill Pipe 40

4 Minimum Collapse Resistance of Casing Under Axial Load (1 of 7) Grade H-40 42

4 Minimum Collapse Resistance of Casing Under Axial Load (2 of 7) Grades J-55 and K-55 43

4 Minimum Collapse Resistance of Casing Under Axial Load (3 of 7) Grades L-80 and N-80 44

4 Minimum Collapse Resistance of Casing Under Axial Load (4 of 7) Grade C-90 45

4 Minimum Collapse Resistance of Casing Under Axial Load (5 of 7) Grade T-95 47

4 Minimum Collapse Resistance of Casing Under Axial Load (6 of 7) Grade P-110 48

4 Minimum Collapse Resistance of Casing Under Axial Load (7 of 7) Grade Q125 49

v

1Bulletin on Performance Properties of Casing, Tubing, and Drill Pipe

Wall Thickness in.

t

Inside Diameterin

d

Threaded and Coupled Extreme Line

Collapse Resistancepsi

Pipe Body Yield1,000 lb

Drift Diameterin

Regular Couplingin

W

SpecialClearanceCouplingin

Wc

Drift Diameterin

StandardJointin

M

OptionalJointin

BULLETIN ON PERFORMANCE PROPERTIES OF CASING, TUBING, AND DRILL PIPE 3

Table 1—Minimum Performance Properties of Casing (Continued)

HigherdGrade

Same Grade

HigherdGrade

Extreme Line Short Long

Same Grade

Higher Grade

Same Grade

Higher Grade

Standard Joint

Optional Joint

Special ClearanceCoupling

RegularCoupling

Buttress Thread

RoundThread

Special ClearanceCoupling

RegularCoupling

Buttress Thread

ExtremeLine

Wall Thickness in.

t

Inside Diameterin

d

Threaded and Coupled Extreme Line

Collapse Resistancepsi

Pipe Body Yield1,000 lb

Drift Diameterin

Regular Couplingin

W

SpecialClearanceCouplingin

Wc

Drift Diameterin

StandardJointin

M

OptionalJointin

BULLETIN ON PERFORMANCE PROPERTIES OF CASING, TUBING, AND DRILL PIPE 5

Table 1—Minimum Performance Properties of Casing (Continued)

HigherdGrade

Same Grade

HigherdGrade

Extreme Line Short Long

Same Grade

Higher Grade

Same Grade

Higher Grade

Standard Joint

Optional Joint

Special ClearanceCoupling

RegularCoupling

Buttress Thread

RoundThread

Special ClearanceCoupling

RegularCoupling

Buttress Thread

ExtremeLine

Wall Thickness in.

t

Inside Diameterin

d

Threaded and Coupled Extreme Line

Collapse Resistancepsi

Pipe Body Yield1,000 lb

Drift Diameterin

Regular Couplingin

W

SpecialClearanceCouplingin

Wc

Drift Diameterin

StandardJointin

M

OptionalJointin

BULLETIN ON PERFORMANCE PROPERTIES OF CASING, TUBING, AND DRILL PIPE 7

Table 1—Minimum Performance Properties of Casing (Continued)

HigherdGrade

Same Grade

HigherdGrade

Extreme Line Short Long

Same Grade

Higher Grade

Same Grade

Higher Grade

Standard Joint

Optional Joint

Special ClearanceCoupling

RegularCoupling

Buttress Thread

RoundThread

Special ClearanceCoupling

RegularCoupling

Buttress Thread

ExtremeLine

Wall Thickness in.

t

Inside Diameterin

d

Threaded and Coupled Extreme Line

Collapse Resistancepsi

Pipe Body Yield1,000 lb

Drift Diameterin

Regular Couplingin

W

SpecialClearanceCouplingin

Wc

Drift Diameterin

StandardJointin

M

OptionalJointin

BULLETIN ON PERFORMANCE PROPERTIES OF CASING, TUBING, AND DRILL PIPE 9

Table 1—Minimum Performance Properties of Casing (Continued)

HigherdGrade

Same Grade

HigherdGrade

Extreme Line Short Long

Same Grade

Higher Grade

Same Grade

Higher Grade

Standard Joint

Optional Joint

Special ClearanceCoupling

RegularCoupling

Buttress Thread

RoundThread

Special ClearanceCoupling

RegularCoupling

Buttress Thread

ExtremeLine

Wall Thickness in.

t

Inside Diameterin

d

Threaded and Coupled Extreme Line

Collapse Resistancepsi

Pipe Body Yield1,000 lb

Drift Diameterin

Regular Couplingin

W

SpecialClearanceCouplingin

Wc

Drift Diameterin

StandardJointin

M

OptionalJointin

BULLETIN ON PERFORMANCE PROPERTIES OF CASING, TUBING, AND DRILL PIPE 11

Table 1—Minimum Performance Properties of Casing (Continued)

HigherdGrade

Same Grade

HigherdGrade

Extreme Line Short Long

Same Grade

Higher Grade

Same Grade

Higher Grade

Standard Joint

Optional Joint

Special ClearanceCoupling

RegularCoupling

Buttress Thread

RoundThread

Special ClearanceCoupling

RegularCoupling

Buttress Thread

ExtremeLine

Wall Thickness in.

t

Inside Diameterin

d

Threaded and Coupled Extreme Line

Collapse Resistancepsi

Pipe Body Yield1,000 lb

Drift Diameterin

Regular Couplingin

W

SpecialClearanceCouplingin

Wc

Drift Diameterin

StandardJointin

M

OptionalJointin

BULLETIN ON PERFORMANCE PROPERTIES OF CASING, TUBING, AND DRILL PIPE 13

Table 1—Minimum Performance Properties of Casing (Continued)

HigherdGrade

Same Grade

HigherdGrade

Extreme Line Short Long

Same Grade

Higher Grade

Same Grade

Higher Grade

Standard Joint

Optional Joint

Special ClearanceCoupling

RegularCoupling

Buttress Thread

RoundThread

Special ClearanceCoupling

RegularCoupling

Buttress Thread

ExtremeLine

Wall Thickness in.

t

Inside Diameterin

d

Threaded and Coupled Extreme Line

Collapse Resistancepsi

Pipe Body Yield1,000 lb

Drift Diameterin

Regular Couplingin

W

SpecialClearanceCouplingin

Wc

Drift Diameterin

StandardJointin

M

OptionalJointin

BULLETIN ON PERFORMANCE PROPERTIES OF CASING, TUBING, AND DRILL PIPE 15

Table 1—Minimum Performance Properties of Casing (Continued)

HigherdGrade

Same Grade

HigherdGrade

Extreme Line Short Long

Same Grade

Higher Grade

Same Grade

Higher Grade

Standard Joint

Optional Joint

Special ClearanceCoupling

RegularCoupling

Buttress Thread

RoundThread

Special ClearanceCoupling

RegularCoupling

Buttress Thread

ExtremeLine

Wall Thickness in.

t

Inside Diameterin

d

Threaded and Coupled Extreme Line

Collapse Resistancepsi

Pipe Body Yield1,000 lb

Drift Diameterin

Regular Couplingin

W

SpecialClearanceCouplingin

Wc

Drift Diameterin

StandardJointin

M

OptionalJointin

BULLETIN ON PERFORMANCE PROPERTIES OF CASING, TUBING, AND DRILL PIPE 17

Table 1—Minimum Performance Properties of Casing (Continued)

HigherdGrade

Same Grade

HigherdGrade

Extreme Line Short Long

Same Grade

Higher Grade

Same Grade

Higher Grade

Standard Joint

Optional Joint

Special ClearanceCoupling

RegularCoupling

Buttress Thread

RoundThread

Special ClearanceCoupling

RegularCoupling

Buttress Thread

ExtremeLine

Wall Thickness in.

t

Inside Diameterin

d

Threaded and Coupled Extreme Line

Collapse Resistancepsi

Pipe Body Yield1,000 lb

Drift Diameterin

Regular Couplingin

W

SpecialClearanceCouplingin

Wc

Drift Diameterin

StandardJointin

M

OptionalJointin

BULLETIN ON PERFORMANCE PROPERTIES OF CASING, TUBING, AND DRILL PIPE 19

Table 1—Minimum Performance Properties of Casing (Continued)

HigherdGrade

Same Grade

HigherdGrade

Extreme Line Short Long

Same Grade

Higher Grade

Same Grade

Higher Grade

Standard Joint

Optional Joint

Special ClearanceCoupling

RegularCoupling

Buttress Thread

RoundThread

Special ClearanceCoupling

RegularCoupling

Buttress Thread

ExtremeLine

Wall Thickness in.

t

Inside Diameterin

d

Threaded and Coupled Extreme Line

Collapse Resistancepsi

Pipe Body Yield1,000 lb

Drift Diameterin

Regular Couplingin

W

SpecialClearanceCouplingin

Wc

Drift Diameterin

StandardJointin

M

OptionalJointin

BULLETIN ON PERFORMANCE PROPERTIES OF CASING, TUBING, AND DRILL PIPE 21

Table 1—Minimum Performance Properties of Casing (Continued)

HigherdGrade

Same Grade

HigherdGrade

Extreme Line Short Long

Same Grade

Higher Grade

Same Grade

Higher Grade

Standard Joint

Optional Joint

Special ClearanceCoupling

RegularCoupling

Buttress Thread

RoundThread

Special ClearanceCoupling

RegularCoupling

Buttress Thread

ExtremeLine

Wall Thickness in.

t

Inside Diameterin

d

Threaded and Coupled Extreme Line

Collapse Resistancepsi

Pipe Body Yield1,000 lb

Drift Diameterin

Regular Couplingin

W

SpecialClearanceCouplingin

Wc

Drift Diameterin

StandardJointin

M

OptionalJointin

BULLETIN ON PERFORMANCE PROPERTIES OF CASING, TUBING, AND DRILL PIPE 23

Table 1—Minimum Performance Properties of Casing (Continued)

HigherdGrade

Same Grade

HigherdGrade

Extreme Line Short Long

Same Grade

Higher Grade

Same Grade

Higher Grade

Standard Joint

Optional Joint

Special ClearanceCoupling

RegularCoupling

Buttress Thread

RoundThread

Special ClearanceCoupling

RegularCoupling

Buttress Thread

ExtremeLine

Wall Thickness in.

t

Inside Diameterin

d

Threaded and Coupled Extreme Line

Collapse Resistancepsi

Pipe Body Yield1,000 lb

Drift Diameterin

Regular Couplingin

W

SpecialClearanceCouplingin

Wc

Drift Diameterin

StandardJointin

M

OptionalJointin

BULLETIN ON PERFORMANCE PROPERTIES OF CASING, TUBING, AND DRILL PIPE 25

Table 1—Minimum Performance Properties of Casing (Continued)

HigherdGrade

Same Grade

HigherdGrade

Extreme Line Short Long

Same Grade

Higher Grade

Same Grade

Higher Grade

Standard Joint

Optional Joint

Special ClearanceCoupling

RegularCoupling

Buttress Thread

RoundThread

Special ClearanceCoupling

RegularCoupling

Buttress Thread

ExtremeLine

Wall Thickness in.

t

Inside Diameterin

d

Threaded and Coupled Extreme Line

Collapse Resistancepsi

Pipe Body Yield1,000 lb

Drift Diameterin

Regular Couplingin

W

SpecialClearanceCouplingin

Wc

Drift Diameterin

StandardJointin

M

OptionalJointin

BULLETIN ON PERFORMANCE PROPERTIES OF CASING, TUBING, AND DRILL PIPE 27

Table 1—Minimum Performance Properties of Casing (Continued)

HigherdGrade

Same Grade

HigherdGrade

Extreme Line Short Long

Same Grade

Higher Grade

Same Grade

Higher Grade

Standard Joint

Optional Joint

aSome joint strengths listed in Col 20 through 29 are greater than the corresponding pipe body yield strength listed in Col 13

bCollapse resistance values calculated by elastic formula

cMinimum internal yield pressure is the lowest of the internal yield pressure of the pipe or the internal yield pressure of the coupling The pressure leakresistance at the E1 or E7 plane is less than the internal yield pressure at minimum yield Leak resistance is as follows:

dFor J-55 and K55 casing the next higher grade is L-80

For N-80 casing the next higher grade is P-110

For P-110 casing the next higher grade is Q125

No higher grades have been established for other grades

RoundThread

Special ClearanceCoupling

RegularCoupling

Buttress Thread

RoundThread

Special ClearanceCoupling

RegularCoupling

Buttress Thread

ExtremeLine

Integral Jointlb/ft Grade

Wall Thicknessin

t

Inside Diameterin

d

Drift Diameterin

Non-Upsetin

W

Regularin

W

SpecialClearancein

Wc

Drift Diameterin

OutsideDiameter

of Boxin

UpsetCoupling Outside Diameter

Integral Joint

BULLETIN ON PERFORMANCE PROPERTIES OF CASING, TUBING, AND DRILL PIPE 29

Table 2—Performance Properties of Tubing (Continued)

Non-Upsetpsi

Regularpsi

SpecialClearancepsi

IntegralJointpsi

Pipe Body Yieldlb

Non-Upsetlb

Regularlb

SpecialClearancelb

IntegralJointlb