Microsoft Word C051929e doc ICS 01 040 93; 93 080 10 Ref No ISO 15878 2008/Cor 1 2008(E) © ISO 2008 – All rights reserved Published in Switzerland INTERNATIONAL STANDARD ISO 15878 2008 TECHNICAL CORRI[.]
Trang 1ICS 01.040.93; 93.080.10 Ref No ISO 15878:2008/Cor.1:2008(E)
© ISO 2008 – All rights reserved
Published in Switzerland
INTERNATIONAL STANDARD ISO 15878:2008
TECHNICAL CORRIGENDUM 1
Published 2008-07-15
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Road construction and maintenance equipment — Asphalt
pavers — Terminology and commercial specifications
TECHNICAL CORRIGENDUM 1
Équipement pour la construction et l'entretien des routes — Asphalteuse — Terminologie et spécifications commerciales
RECTIFICATIF TECHNIQUE 1
Technical Corrigendum 1 to ISO 15878:2008 was prepared by Technical Committee ISO/TC 195, Building
construction machinery and equipment
Page 27, Figure A.20
The position of W2 and its definition in the Key have been corrected See Figure A.20 on page 2
Trang 2ISO 15878:2008/Cor.1:2008(E)
Key
W2 operating width — minimum
R1 machine clearance circle
R2 turning radius
NOTE Dimensions presented are only for illustration of parameters given in 6.2 and 6.3 and do not show the full dimensional characteristics of the paver
Figure A.20 — Wheeled asphalt paver — Top view