NISSAN QUEST 2005 OWNER MANUAL SÁCH HƯỚNG dẫn sử DỤNG

NISSAN QUEST 2005 OWNER MANUAL-SÁCH HƯỚNG DẪN SỬ DỤNG XE NISSAN QUEST ĐỜI 2005

Trang 1

Welcome to the growing family of new NISSAN

owners This vehicle is delivered to you with

confidence It was produced using the latest

techniques and strict quality control

This manual was prepared to help you

under-stand the operation and maintenance of your

vehicle so that you may enjoy many miles

(kilome-ters) of driving pleasure Please read through this

manual before operating your vehicle

A separate Warranty Information Booklet

explains details about the warranties

cov-ering your vehicle The “NISSAN Service

and Maintenance Guide” explains details

about maintaining and servicing your

ve-hicle Additionally, a separate Customer

Care/Lemon Law Booklet (U.S only) will

explain how to resolve any concerns you

may have with your vehicle, as well as

clarify your rights under your state’s lemon

law.

Your NISSAN dealership knows your vehicle

best When you require any service or have any

questions, they will be glad to assist you with the

extensive resources available to them

Before driving your vehicle please read this er’s Manual carefully This will ensure familiaritywith controls and maintenance requirements, as-sisting you in the safe operation of your vehicle

Own-WARNING IMPORTANT SAFETY INFORMATION RE- MINDERS FOR SAFETY!

Follow these important driving rules to help ensure a safe and complete trip for you and your passengers!

● NEVER drive under the influence of cohol or drugs.

al-● ALWAYS observe posted speed limits and never drive too fast for conditions.

● ALWAYS use your seat belts and priate child restraint systems Preteen children should be seated in the rear seat.

appro-● ALWAYS provide information about the proper use of vehicle safety features to all occupants of the vehicle.

● ALWAYS review this owner’s manual for important safety information.

MODIFICATION OF YOUR VEHICLE This vehicle should not be modified Modification could affect its performance, safety or durability, and may even violate governmental regulations In addition, damage or performance problems resulting from modifications may not be covered under NISSAN warranties.

Trang 2

This manual includes information for all options

available on this model Therefore, you may find

some information that does not apply to your

vehicle

All information, specifications and illustrations in

this manual are those in effect at the time of

printing NISSAN reserves the right to change

specifications or design without notice and

with-out obligation

IMPORTANT INFORMATION ABOUT

THIS MANUAL

You will see various symbols in this manual They

are used in the following ways:

WARNING This is used to indicate the presence of a

hazard that could cause death or serious

personal injury To avoid or reduce the

risk, the procedures must be followed

precisely.

CAUTION This is used to indicate the presence of a

hazard that could cause minor or

moder-ate personal injury or damage to your

ve-hicle To avoid or reduce the risk, the

pro-cedures must be followed carefully.

If you see this symbol, it means “Do not do this”

or “Do not let this happen.”

If you see a symbol similar to these in an tion, it means the arrow points to the front of thevehicle

illustra-Arrows in an illustration that are similar to theseindicate movement or action

Arrows in an illustration that are similar to thesecall attention to an item in the illustration

CALIFORNIA PROPOSITION 65 WARNING

WARNING Engine exhaust, some of its constituents, and certain vehicle components contain

or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

© 2004 NISSAN NORTH AMERICA, INC.GARDENA, CALIFORNIAAll rights reserved No part of this Owner’sManual may be reproduced or stored in a retrievalsystem, or transmitted in any form, or by anymeans, electronic, mechanical, photocopying,recording or otherwise, without the prior writtenpermission of Nissan North America, Inc., Gar-dena, California

APD1005

WHEN READING THE MANUAL

Trang 3

Your new NISSAN is the result of our dedication to

produce the finest in safe, reliable and economical

transportation Your vehicle is the product of a

suc-cessful worldwide company that manufactures cars

and trucks in over 17 countries and distributes them

in 170 nations

NISSAN vehicles are designed and manufactured

by Nissan Motor Co., Ltd which was founded in

Tokyo, Japan in 1933, and NISSAN affiliates

world-wide, collectively growing to become the fifth largest

automaker in the world In addition to cars and

trucks, NISSAN also makes forklift trucks, marine

engines, boats and other diversified products

NISSAN has made a substantial and growing

in-vestment in North America NISSAN’s commitment

is over $6 billion dollars in capital investments in

facilities across the continent Some of the facilities

include the Nissan Manufacturing facilities in

Can-ton, Mississippi and in Smyrna, Tennessee, vehicle

styling design at Nissan Design America, Inc in SanDiego, California, and engineering at Nissan Tech-nical Center North America in Farmington Hills,Michigan Additionally, NISSAN employs more than21,000 people throughout the United States,Canada, and Mexico An additional 60,000 peoplework for the 1,250 NISSAN and INFINITI dealersacross North America

NISSAN is also a substantial contributor to theCanadian economy Nissan Canada Inc., its suppli-ers and over 150 dealers employ approximately4,500 people These include company employeesand the staffs of NISSAN dealers all across Canada

In addition, many Canadians work for companiesthat supply NISSAN and NISSAN dealers with ma-terials and services ranging from the operation ofport facilities and transportation services, to thesupply of lubricants, parts and accessories

NISSAN pioneered the use of electronics and puters in automobiles, and has led the industry inimproving both performance and fuel efficiencythrough new engine designs and the use of syn-thetic materials to reduce vehicle weight The com-pany has also developed ways to build quality into itsvehicles at each stage of the production process,both through extensive use of automation and —most importantly — through an awareness that

com-peopleare the central element in quality control.From the time the parts arrived from our suppliersuntil you took delivery of your new NISSAN, dozens

of checks were made to ensure that only the best jobwas being done in producing and delivering yourvehicle NISSAN also takes great care to ensure thatwhen you take your NISSAN to your dealer formaintenance, the service technician will perform hiswork according to the quality standards that havebeen established by NISSAN

Safety has also been built into your NISSAN As youknow, seat belts are an integral part of the safetysystems that will help protect you and your passen-gers in the event of a sudden stop or an accident

We urge you to use the seat belts every time youdrive the vehicle

The NISSAN story of growth and achievement flects our major goal: to provide you, our customer,with a vehicle that is built with quality and craftsman-ship — a product that we can be proud to build andyou can be proud to own

re-WFW0002

WELCOME TO THE WORLD OF NISSAN

Trang 4

NISSAN CARES

Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs Your satisfaction with your vehicle and your NISSAN dealer areour primary concerns Your NISSAN dealer is always available to assist you with all your automobile sales and service needs

However, if there is something that your NISSAN

dealer cannot assist you with or you would like to

provide NISSAN directly with comments or

ques-tions, please contact the NISSAN Consumer Affairs

Department using our toll-free number:

For U.S customers

– Date of purchase– Current odometer reading– Your NISSAN dealer’s name– Your comments or questionsOR

You can write to NISSAN with the information at:

For U.S customers

Nissan North America, Inc.

Consumer Affairs Department P.O Box 191

Gardena, California 90248-0191

For Canadian customers

Nissan Canada Inc.

5290 Orbitor Drive Mississauga, Ontario L4W 4Z5

We appreciate your interest in NISSAN and thank you for buying a quality NISSAN vehicle

NISSAN CUSTOMER CARE PROGRAM

Trang 5

Table of

Contents Illustrated table of contents Safety—Seats, seat belts and supplemental restraint system

Instruments and controls Pre-driving checks and adjustments Display screen, heater, air conditioner and audio systems Starting and driving

In case of emergency Appearance and care Maintenance and do-it-yourself Technical and consumer information Index

0 1 2 3 4 5 6 7 8 9 10

Trang 7

0 Illustrated table of contents

Airbags, seat belts and child restraints 0-2

Exterior front 0-3

Exterior rear 0-4

Passenger compartment 0-5

Instrument panel 0-6Engine compartment check locations 0-8Warning/indicator lights 0-9

Trang 8

1 3rd row bench center seat belt(P 1-15)

2 3rd row bench seat belts (P 1-15)

3 Top tether strap anchor points (P 1-38)

4 2nd row captain’s chair seat belts(P 1-15)

5 Front seat belts (P 1-15)

6 Supplemental curtain side-impact airbag (P 1-48)

7 Supplemental front impact air bags(P 1-48)

8 Seats (P 1-2)

9 Occupant classification sensor(weight sensor) (P.1-55)

10 Seat belt pretensioners (P 1-61)

11 Top tether strap anchor for vehicleswithout 2nd or 3rd row seats (P 1-38)

12 Supplemental side impact air bag(if so equipped) (P 1-48)

13 LATCH (Lower Anchors and Tethers forCHildren) (P 1-36)

See the page number indicated in theses for operating details.

Trang 9

12 Fog light switch (P 2-22)

13 Tie down/towing hooks (P 6-12)

paren-LII0013

EXTERIOR FRONT

Illustrated table of contents 0-3

Trang 10

1 Rear window defroster switch (P 2-17)

Trang 11

1 DVD entertainment system(if so equipped) (P 4-44)

2 Personal lights (P 2-44)

3 Skyview roof (if so equipped) (P 2-41)

4 Sunroof (if so equipped) (P 2-41)

5 Map lights (P 2-45), Console lightP.2-45)

Trang 12

7 Meters and gauges (P 2-3)

8 Display screen/Navigation system*(P 4-2, P 4-8)

14 Audio system controls (P 4-31)

15 Display screen/Navigation system*controls (P 4-2, 4-8)

16 Shift selector lever (P 5-7)

17 Tilt steering wheel controls (P 3-20)

WIC0837

INSTRUMENT PANEL

0-6 Illustrated table of contents

Trang 13

18 Rear sonar system off switch

(if so equipped) (P 2-25)

19 Vehicle dynamic control (VDC) off

switch (if so equipped) or Traction

con-trol system (TCS) off switch

(if so equipped) (P 2-24, P 2-24)

20 Lights on demand switch (P.2-43 )

21 Instrument brightness control (P 2-21)

22 Outside mirror controls (P 3-23)

*: Refer to the separate Navigation System

Own-er’s Manual (if so equipped)

See the page number indicated in

paren-theses for operating details.

Trang 14

1 Power steering fluid reservoir (P 8-13)

2 Engine oil filler cap (P 8-8)

3 Brake fluid reservoir (P 8-13)

12 Engine coolant reservoir (P 8-7)

Trang 15

Low tire sure warning light

pres-2-9

Low windshield washer fluid warning light

2-10

Seat belt ing light and chime

warn-2-10

Supplemental air bag warning light

2-10

Indicator light

Automatic transmission position indicator light

2-11

Cruise set switch indicator light

2-11

High beam dicator light (blue)

in-2-11

WARNING/INDICATOR LIGHTS

Trang 16

system off

indi-cator light (if

Vehicle namic control off indicator light (if so equipped)

dy-2-12

0-10 Illustrated table of contents

Trang 17

1 Safety—Seats, seat belts and

supplemental restraint system

2nd row captain’s chair adjustment 1-6

3rd row bench seat adjustment 1-8

Active head restraint (front seats, if so

Three-point type seat belt with retractor 1-19

Seat belt extenders 1-24

Seat belt maintenance 1-24Child restraints 1-25Precautions on child restraints 1-25Child restraint installation on 2nd row

captain’s chairs 1-26Child restraint installation on 3rd row bench

seat .1-31LATCH (Lower Anchors and Tethers for

CHildren) system 1-36Top tether strap child restraint 1-38Child restraint installation on front passenger

seat .1-40Booster seats 1-43Precautions on booster seats 1-43Supplemental restraint system 1-48Precautions on supplemental restraint

system 1-48Supplemental air bag warning labels 1-62Supplemental air bag warning light 1-63

Trang 18

● Do not ride in a moving vehicle when

the seatback is reclined This can be

dangerous The shoulder belt will not

be against your body In an accident,

you could be thrown into it and receive

neck or other serious injuries You

could also slide under the lap belt and

receive serious internal injuries.

● For the most effective protection when the vehicle is in motion, the seat should

be upright Always sit well back in the seat and adjust the seat properly See

“Precautions on Seat Belt Usage” later

● After adjustment, gently rock in the seat

to make sure it is securely locked.

ARS1152

SEATS

1-2 Safety—Seats, seat belts and supplemental restraint system

Trang 19

Forward and backward

Pull the lever up and hold it while you slide the

seat forward or backward to the desired position

Release the lever to lock the seat in position

Reclining

To recline the seatback, pull the lever up and leanback To bring the seatback forward, pull the lever

up and lean your body forward Release the lever

to lock the seatback in position

The reclining feature allows adjustment of theseatback for occupants of different sizes foradded comfort and to help obtain proper seatbelt fit (see “Precautions on seat belt usage” later

in this section) Also, the seatback can be clined to allow occupants to rest when the ve-hicle is stopped

re-WARNING After adjustment, gently rock in the seat to make sure it is securely locked.

Safety—Seats, seat belts and supplemental restraint system 1-3

Trang 20

Seat lifter (if so equipped for driver’s

seat)

Turn either dial to adjust the angle and height of

the seat cushion to the desired position

Lumbar support (driver’s seat)The lumbar support feature provides lower backsupport to the driver Move the lever up or down

to adjust the seat lumbar area

Trang 21

FRONT POWER SEAT

ADJUSTMENT (if so equipped)

WARNING

● Do not adjust the driver’s seat while

driving so full attention may be given to

vehicle operation The seat may move

suddenly and could cause loss of

con-trol of the vehicle.

● Do not leave children unattended inside

the vehicle They could unknowingly

ac-tivate switches or controls Unattended

children could become involved in

seri-ous accidents.

Operating tips

● The power seat motor has an auto-resetoverload protection circuit If the motorstops during operation, wait 30 seconds,then reactivate the switch

● Do not operate the power seat switch for along period of time when the engine is off

This will discharge the battery

See “Automatic drive positioner (if so equipped)”

in “Pre-driving checks and adjustments” for matic drive positioner operation

auto-Forward and backwardMoving the switch forward or backward will slidethe seat forward or backward to the desiredposition

RecliningMove the recline switch backward until the de-sired angle is obtained To bring the seatbackforward again, move the switch forward andmove your body forward The seatback will moveforward

The reclining feature allows adjustment of theseatback for occupants of different sizes foradded comfort and to help obtain proper seatbelt fit (see “Precautions on seat belt usage” later

in this section) Also, the seatback can be clined to allow occupants to rest when the ve-hicle is stopped

re-WRS0522

Trang 22

Seat lifter (if so equipped for driver’s

seat)

Push the front or rear end of the switch up or

down to adjust the angle and height of the seat

cushion

Lumbar support (driver’s seat)The lumbar support feature provides lower backsupport to the driver Move the lever up or down

to adjust the seat lumbar area

2ND ROW CAPTAIN’S CHAIR ADJUSTMENT

Forward and backwardPull the levers1and hold it while you slides2 theseat forward or backward to the desired position.Release the lever to lock the seat in position

Trang 23

To recline the seatback, pull up on the lever and

lean back

The recline feature allows adjustment of the seat

back for occupants of different sizes to help

obtain proper seat belt fit (see “Precautions on

seat belt usage” later in this section) Also, the

seatback can be reclined to allow occupants to

rest when the vehicle is stopped

WARNING

● Do not ride in a moving vehicle when the seatback is reclined This can be dangerous The shoulder belt will not

be against your body In an accident, you could be thrown into it and receive neck or other serious injuries You could also slide under the lap belt and receive serious internal injuries.

be upright Always sit well back in the seat and adjust the seat belt properly.

See “Precautions on seat belt usage”

later in this section.

Tip up for easy entry to the 3rd rowThe 2nd row captain’s chairs can be tipped for-ward for easy entry or exit from the 3rd row benchseat To enter the 3rd row bench seat lift up onthe lever located on the lower base of the 2ndrow captain’s chair to tip the seat forward To exitthe 3rd row bench seat pull back on the lever onthe lower base of the 2nd row captain’s chair andpush the seat forward

Trang 24

3RD ROW BENCH SEAT

ADJUSTMENT

Reclining

Lift up on the latch in the center of the seatback to

adjust the back of the seat Release the latch to

lock the seatback into position

WARNING

ACTIVE HEAD RESTRAINT (front seats, if so equipped)

WARNING

● Always adjust the head restraints erly as specified in the previous section Failure to do so can reduce the effectiveness of the active head restraint.

prop-● Active head restraints are designed to supplement other safety systems Al- ways wear seat belts No system can prevent all injuries in any accident.

Trang 25

● Do not attach anything to the head

re-straint stalks Doing so could impair

active head restraint function.

The head restraint moves forward utilizing the

force that the seatback receives from the

occu-pant in a rear-end collision The movement of the

head restraint helps support the occupant’s head

by reducing its backward movement and helping

absorb some of the forces that may lead to

whip-lash type injuries

Active head restraints are effective for collisions

at low to medium speeds in which it is said that

whiplash injury occurs most

Active head restraints operate only in certain

rear-end collisions After the collision, the head

restraints return to their original positions

Properly adjust the active head restraints as

de-scribed earlier in this section

HEAD RESTRAINT ADJUSTMENT

To raise the head restraint, pull it up To lower,push and hold the lock knob and push the headrestraint down

The 2nd row captain’s chairs and the 3rd rowbench seat head restraints are removable forstorage See “Head restraint storage” later in thisowner’s manual The front seat head restraintsare not removable

WARNING Head restraints should be adjusted properly as they may provide significant protection against injury in an accident Do not remove them Check the adjustment after someone else uses the seat.

LRS0286

Trang 26

Adjust the head restraint so the center is level

To use the armrests, pull them down to the ing position

rest-sA Resting position

sB Stowed positionAdjustable armrest (if so equipped)The front seat and 2nd row captain’s chair isequipped with an adjustable armrest, pull it down

to the resting position Adjust the armrest to thedesired position by raising the armrest to thedesired height and releasing the armrest To re-adjust the armrest to a lower position, raise the

armrest to the stowed position, then pull it to theresting position and adjust to the desired height.FLEXIBLE SEATING

● Do not allow people to ride in any area

of your vehicle that is not equipped with seats and seat belts Be sure everyone

in your vehicle is in a seat and using a seat belt properly.

● Do not fold down the rear seats when occupants are in the rear seat area or any luggage is on the rear seats.

● Head restraints should be adjusted properly as they may provide significant protection against injury in an accident Always replace and adjust them properly if they have been removed for any reason.

Trang 27

● If the head restraints are removed for

any reason, they should be securely

stored to prevent them from causing

injury to passengers or damage to the

vehicle in case of sudden braking or an

accident.

● When returning the seatbacks to the

upright position, be certain they are

completely secured in the latched

posi-tion If they are not completely secured,

passengers may be injured in an

acci-dent or sudden stop.

● Properly secure all cargo to help

pre-vent it from sliding or shifting Do not

place cargo higher than the seatbacks.

In a sudden stop or collision, unsecured

cargo could cause personal injury.

Folding

To fold the seatback forward, for cargo hauling,lift up on the recline lever and fold the seatbackover the seat base

Folding the 2nd row captain’s chair

s1 To fold the 2nd row captain’s chairs to thefloor for maximum cargo hauling, remove thehead restraints Remove the head restraints

by lifting up, then push and hold the releaseknob and place them in the storage bag.Make sure to secure the storage bag, see

“Head restraint storage” in the “Instrumentand controls” section of this Owner’sManual

s2 Lift up on the recline lever to fold the back forward on the seat base

Trang 28

s3 Push down on the small knob on the back of

the seat to release the base of the seat s4 Then fold the entire seat forward into the

stowed position in the floor

s5 Reverse this process to return the 2nd row

captain’s chairs to a seating position Make sure to properly install the head restraints and to push the seats down into the floor until they latch into place.

Folding

To fold the seatback forward, for cargo hauling,lift up on the latch in the center of the seatback tofold the seatback over the seat base

Trang 29

Folding the 3rd row bench seat

WARNING

● The 3rd row bench seat is heavy Be

careful when folding and unfolding.

● To avoid injury to yourself or others,

keep hands and body clear of floor

opening when folding.

s1 To fold the 3rd row bench seat flat into thefloor, for maximum cargo hauling, remove allthree head restraints Remove the head re-straint by lifting up, then push and hold therelease button and continue lifting Thenplace them in the storage bag Make sure tosecure the storage bag See “Head restraintstorage” in the “Instrument and controls”

section of this Owner’s Manual

s2 Disconnect and secure the center seat beltand tongues into the retractor base See

“Stowing rear center seat belt” later in thissection Then push the button in the center

of the seatback while pulling back on the pullstrap to release the back of the seat Rotatethe seatback toward the back of the vehicle

Trang 30

s3 Pull up on the lever located on the back of

the seat base This will fold the seat base

toward the back of the vehicle

s4 The entire seat will rotate toward you andstow flat in the floor s5 The rear seat anchors are spring loaded and

can be folded into the side panels to mize cargo space The anchors are held inthe folded position by the items in the cargoarea When the load is removed from thecargo area, the rear seat anchors automati-cally return to the unfolded position

maxi-6 Reverse this process to return the bench

seat to a seating position Make sure to properly install the head restraints, push the bench seat down into the floor, and pull back on the seatback until they latch into place.

Trang 31

● Do not unfasten the rear center seat

belt connector except when folding

down the rear seat.

● When attaching the rear center seat

belt connector, be certain that the

seat-backs are completely secured in the

latched position and the rear center

seat belt connector is completely

secured.

● If the rear center seat belt connector

and the seatbacks are not secured in

the correct position, serious personal

injury may result in an accident or

sud-den stop.

● When returning the seatbacks, be sure

to attach the rear center seat belt

ad-in an accident and/or the severity of ad-injury may begreatly reduced NISSAN strongly encouragesyou and all of your passengers to buckle up everytime you drive, even if your seating position in-cludes a supplemental air bag

Most U.S states and Canadian provinces

or territories specify that seat belts be worn

at all times when a vehicle is being driven.

SSS0136

SEAT BELTS

Trang 32

● Every person who drives or rides in this

vehicle should use a seat belt at all

times Children should be properly

re-strained in the rear seat and, if

appro-priate, in a child restraint.

WARNING

● The seat belt should be properly justed to a snug fit Failure to do so may reduce the effectiveness of the entire restraint system and increase the chance or severity of injury in an accident Serious injury or death can occur

ad-if the seat belt is not worn properly.

Trang 33

● Always route the shoulder belt over

your shoulder and across your chest.

Never run the belt behind your back,

under your arm or across your neck The

belt should be away from your face and

neck, but not falling off your shoulder.

● Position the lap belt as low and snug as

possible AROUND THE HIPS, NOT THE

WAIST A lap belt worn too high could

increase the risk of internal injuries in

● Do not allow more than one person to use the same seat belt.

● Never carry more people in the vehicle than there are seat belts.

● If the seat belt warning light glows tinuously while the ignition is turned

con-ON with all doors closed and all seat belts fastened, it may indicate a mal- function in the system Have the system checked by a NISSAN dealer.

● Once the pre-tensioner seat belt has activated, it cannot be reused and must

be replaced together with the retractor.

See your NISSAN dealer.

● Removal and installation of the tensioner seat belt system components should be done by a NISSAN dealer.

p● All seat belt assemblies, including tractors and attaching hardware, should be inspected after any collision

re-by a NISSAN dealer NISSAN mends that all seat belt assemblies in use during a collision be replaced un- less the collision was minor and the belts show no damage and continue to operate properly Seat belt assemblies not in use during a collision should also

recom-be inspected and replaced if either damage or improper operation is noted.

● All child restraints and attaching ware should be inspected after any collision Always follow the restraint manufacturer’s inspection instructions and replacement recommendations The child restraints should be replaced

hard-if they are damaged.

to learn the best way to transport your child.SSS0014

Trang 34

There are three basic types of child restraint

systems:

● Rear facing child restraint

● Front facing child restraint

● Booster seat

The proper restraint depends on the child’s size

Generally, infants up to about 1 year and less

than 20 pounds (9 kg) should be placed in rear

facing child restraints Front facing child

re-straints are available for children who outgrow

rear facing child restraints and are at least one

year old Booster seats are used to help position

a vehicle lap/shoulder belt on a child who can no

longer use a front facing child restraint

WARNING Infants and children need special protec-

tion The vehicle’s seat belts may not fit

them properly The shoulder belt may

come too close to the face or neck The

lap belt may not fit over their small hip

bones In an accident, an improperly

fit-ting seat belt could cause serious or fatal

injury Always use appropriate child

restraints.

All U.S states and Canadian provinces or

terri-tories require the use of approved child restraints

for infants and small children See “Child straints” later in this section

Re-Also, there are other types of child restraintsavailable for larger children for additional protec-tion

NISSAN recommends that all pre-teens and children be restrained in the rear seat.

According to accident statistics, children are safer when properly restrained in the rear seat than in the front seat.

This is especially important because your vehicle has a supplemental restraint system (Air bag system) for the front passenger See “Supplemental restraint system”

later in this section.

InfantsInfants up to at least one year old should beplaced in a rear facing child restraint NISSANrecommends that infants be placed in child re-straints that comply with Federal Motor VehicleSafety Standards or Canadian Motor VehicleSafety Standards You should choose a childrestraint that fits your vehicle and always followthe manufacturer’s instructions for installationand use

Small ChildrenChildren that are over one year old and weighbetween 20 lbs (9 kg) and 40 lbs (18 kgs) can beplaced in a forward facing child restraint Refer tothe manufacturer’s instructions for minimum andmaximum weight and height recommendations.NISSAN recommends that small children beplaced in child restraints that comply with FederalMotor Vehicle Safety Standards or Canadian Mo-tor Vehicle Safety Standards You should choose

a child restraint that fits your vehicle and alwaysfollow the manufacturer’s instructions for instal-lation and use

Larger childrenChildren who are too large for child restraintsshould be seated and restrained by the seat beltswhich are provided The seat belt may not fitproperly if the child is less than 4 feet 9 inches(142.5 cm) tall and weighs between 40 lbs (18kg) and 80 lbs (36 kg) A booster seat should beused to obtain proper seat belt fit

NISSAN recommends that a child be placed in acommercially available booster seat if the shoul-der belt in the child’s seating position fits close tothe face or neck or if the lap portion of the seatbelt goes across the abdomen The booster seatshould raise the child so that the shoulder belt isproperly positioned across the top, middle por-

Trang 35

tion of the shoulder and the lap belt is low on the

hips A booster seat can only be used in seating

positions that have a three-point type seat belt

The booster seat should fit the vehicle seat and

have a label certifying that it complies with

Fed-eral Motor Vehicle Safety Standards or Canadian

Motor Vehicle Safety Standards Once the child

has grown so the shoulder belt is no longer on or

near the face and neck, use the shoulder belt

without the booster seat

WARNING Never let a child stand or kneel on any

seat and do not allow a child in the cargo

areas while the vehicle is moving The

child could be seriously injured or killed in

an accident or sudden stop.

PREGNANT WOMEN

NISSAN recommends that pregnant women use

seat belts The seat belt should be worn snug,

and always position the lap belt as low as

pos-sible around the hips, not the waist Place the

shoulder belt over your shoulder and across your

chest Never run the lap/shoulder belt over your

abdominal area Contact your doctor for specific

recommendations

INJURED PERSONSNISSAN recommends that injured persons useseat belts Check with your doctor for specificrecommendations

THREE-POINT TYPE SEAT BELT WITH RETRACTOR

WARNING

● Every person who drives or rides in this vehicle should use a seat belt at all times.

be upright Always sit well back in the seat and adjust the seat belt properly.

Fastening the seat belts

1 Adjust the seat See “Seats” earlier in thissection

s2 Slowly pull the seat belt out of the retractorand insert the tongue into the buckle untilyou hear and feel the latch engage

● The retractor is designed to lock during

a sudden stop or on impact A slow pulling motion permits the seat belt to move, and allows you some freedom of movement in the seat.

● If the seat belt cannot be pulled from its fully retracted position, firmly pull the belt and release it Then smoothly pull the belt out of the retractor.

WRS0137

Trang 36

s3 Position the lap belt portion low and snug

on the hips as shown.

s4 Pull the shoulder belt portion toward the

retractor to take up extra slack Be sure the

shoulder belt is routed over your shoulder

and across your chest

The front passenger seat, 2nd row captain’s

chairs and the rear bench seat three-point seat

belts have a locking mechanism for child restraint

installation It is referred to as the automatic

lock-ing mode or child restraint mode

When automatic locking mechanism is activated

the seat belt cannot be extended again until the

seat belt tongue is detached from the buckle and

fully retracted Once retracted, the seat belt is inthe emergency locking mode See “Child re-straints” later in this section for more information

The automatic locking mode should be used only for child restraint installation.

During normal seat belt use by a ger, the locking mode should not be activated If it is activated it may cause uncom- fortable seat belt tension It can also change the operation of the front passenger air bag See “Front passenger air bag and status light” later in this section.

passen-WARNING When fastening the seat belts, be certain that the seatbacks are completely secured in the latched position If they are not completely secured, passengers may

be injured in an accident or sudden stop.

Unfastening the seat belts

s1 To unfasten the seat belt, press the button onthe buckle The seat belt automatically re-tracts

Checking seat belt operationSeat belt retractors are designed to lock seat beltmovement by two separate methods:

● When the seat belt is pulled quickly from theretractor

● When the vehicle slows down rapidly

To increase your confidence in the seat belts,check the operation as follows

Trang 37

● Grasp the shoulder belt and pull forward

quickly The retractor should lock and

re-strict further belt movement

If the retractor does not lock during this check or

if you have any questions about seat belt

opera-tion, see a NISSAN dealer

Center of the 3rd row bench seatThe 3rd row center seat belt has a connectortongues1 and a seat belt tongues2 Both theconnector tongue and the seat belt tongue must

be securely latched for proper seat belt tion

a sudden stop.

Trang 38

Stowing the 3rd row center seat belt

When folding down the 3rd row seat, the rearcenter seat belt can be retracted into a stowedposition as follows:

s1 Release the connector tongue by inserting asuitable tool such as key into the connectorbucklesA

s2 Retract the seat belt up to the retractor base

s3 Insert the seat belt tongue into the fabricsleeve so it will lay flat Then secure theconnector tongue into the retractor base

WARNING

● Do not unfasten the rear center seat belt connector except when folding down the rear seat.

● When attaching the rear center seat belt connector, be certain that the seatbacks are completely secured in the latched position and the rear center seat belt connector is completely secured.

● If the rear center seat belt connector and the seatbacks are not secured in the correct position, serious personal injury may result in an accident or sudden stop.

Trang 39

Attaching the 3rd row center seat belt

Always be sure the 3rd row center seat belt

connector tongue and connector buckle are

at-tached Disconnect only when folding down the

rear seat

To connect the buckle:

s1 Pull out the connector tongue from the

re-tractor base

s2 Pull out the seat belt tongue from the fabric

sleeve

s3 Pull the seat belt and secure the receiver

buckle until it clicks

The center seat belt connector tongue and

re-ceiver buckle are indicated by the > and < mark

The center seat belt connector tongue can be

attached only into the rear center seat belt

con-nector buckle

To fasten the seat belt, see “Fastening the seat

belt” earlier in this section

WARNING

● Do not unfasten the rear center seat

belt connector except when folding

down the rear seat.

● When attaching the rear center seat belt connector, be certain that the seatbacks are completely secured in the latched position and the rear center seat belt connector is completely secured.

● If the rear center seat belt connector and the seatbacks are not secured in the correct position, serious personal injury may result in an accident or sudden stop.

Shoulder belt height adjustment (Front and 2nd row seats)

The shoulder belt anchor height should be justed to the position best for you (See “Precau-tions on seat belt usage” earlier in this section.)

ad-To adjust, push or pull outs1 the adjustmentbutton and move the shoulder belt anchors2tothe desired position, so the belt passes over thecenter of the shoulder The belt should be awayfrom your face and neck, but not falling off yourshoulder Release the adjustment button to lockthe shoulder belt anchor into position

Front seats

LRS0294

Trang 40

● After adjustment, release the

adjust-ment button and try to move the

shoul-der belt anchor up and down to make

sure it is securely fixed in position.

● The shoulder belt anchor height should

be adjusted to the position best for you.

Failure to do so may reduce the

effec-tiveness of the entire restraint system

and increase the chance or severity of

injury in an accident.

SEAT BELT EXTENDERS

If, because of body size or driving position, it isnot possible to properly fit the lap-shoulder beltand fasten it, an extender is available which iscompatible with the installed seat belts The ex-tender adds approximately 8 inches (200 mm) oflength and may be used for either the driver orfront passenger seating position See a NISSANdealer for assistance if an extender is required

WARNING

● Only NISSAN seat belt extenders, made

by the same company which made the original equipment seat belts, should

be used with NISSAN seat belts.

● Adults and children who can use the standard seat belt should not use an extender Such unnecessary use could result in serious personal injury in the event of an accident.

● Never use seat belt extenders to install child restraints If the child restraint is not secured properly, the child could be seriously injured in a collision or a sudden stop.

SEAT BELT MAINTENANCE

● To clean the seat belt webbing, apply a

mild soap solution or any solution mended for cleaning upholstery or carpet.Then wipe with a cloth and allow the seatbelts to dry in the shade Do not allow theseat belts to retract until they are completelydry

recom-● If dirt builds up in the shoulder belt guide of the seat belt anchors, the seat

belts may retract slowly Wipe the shoulderbelt guide with a clean, dry cloth

● Periodically check to see that the seat belt and the metal components, such as

buckles, tongues, retractors, flexible wiresand anchors, work properly If loose parts,deterioration, cuts or other damage on thewebbing is found, the entire seat belt as-sembly should be replaced

2nd row seats

LRS0242

Tiêu đề	Nissan Quest 2005 Owner Manual Sách Hướng dẫn Sử Dụng
Trường học	Nissan North America, Inc.
Chuyên ngành	Automotive
Thể loại	Hướng Dẫn Sử Dụng
Năm xuất bản	2005
Thành phố	Gardena

Định dạng
Số trang	328
Dung lượng	5,75 MB