TI095: High-Performance Computing HPC for O'Hare Hub Aymeric Rousseau, ANL TI096: Technology Integration to Gain Commercial Efficiency for the Urban Goods Delivery System Anne Goodchild,
Trang 1TI095: High-Performance Computing (HPC) for O'Hare Hub
Aymeric Rousseau, ANL
TI096: Technology Integration to Gain Commercial Efficiency for the Urban
Goods Delivery System Anne Goodchild, University of Washington
TI097: Drones, Delivery Robots, Driverless Cars, and Intelligent Curbs for Increasing Energy Productivity of First-/Last-Mile Goods Movement
Agreement Constantine Samaras, Carnegie Mellon University
TI920: Technology Integration (TI) Project Overview
Mark Smith, DOE
TI091: Solutions for Curbside-Charging Electric Vehicles Planned for Urban
Growth Robert Cox, University of North Carolina at Charlotte
TI092: Vehicle Charging Innovations for Multi-Unit Dwellings (VCI-MUD)
Kevin Wood, Center for Sustainable Energy
TI093: Electric Vehicle Supply Equipment (EVSE) Innovation: Streetlight
Charging in City Right-Of-Way Miriam Bouallegue, Metropolitan Energy Center
ACE138: Partnership for Advanced Combustion Engines (PACE) - A
Light-Duty National Laboratory Combustion Consortium
Paul Miles, SNL
ACE139: Development of an Optimized Gasoline Surrogate Formulation for
PACE Experiments and Simulations Scott Wagnon, LLNL
ACE140: Improved Chemical Kinetics and Algorithms for More Accurate,
Faster Simulations Russell Whitesides, LLNL
Tuesday, June 2, Oral Presentations
ACE141: Advanced Ignition System Fundamentals
Isaac Ekoto, SNL
ACE142: Development and Validation of Simulation Tools for Advanced
Ignition Systems Riccardo Scarcelli, ANL
ACE143: Fuel Injection and Spray Research
Chris Powell, ANL
ACE144: Spray Wall Interactions and Soot Formation
Lyle Pickett, SNL
ACE146: Direct Numerical Simulation (DNS) and High-Fidelity Large-Eddy
Simulation (LES) for Improved Prediction of In-Cylinder Flow and
Combustion Processes Muhsin Ameen, ANL
Trang 2Tuesday, June 2, Oral Presentations
ACE150: Enabling Low-Temperature Plasma (LTP) Ignition Technologies for
Multi-Mode Engines through the Development of a Validated High-Fidelity
LTP Model for Predictive Simulation Tools Nick Tsolas, Auburn University
5:45 PM
ACE151: Hierarchically Informed Engineering Models for Predictive
Modeling of Turbulent Premixed Flame Propagation in Pre-Chamber
Turbulent Jet Ignition Haifend Wang, Purdue University
6:00 PM
ACE152: Development of High-Fidelity and Efficient Modeling Capabilities
for Enabling Co-Optimization of Fuels and Multi-Mode Engines
Matthiaas Ihme, Stanford University
TI101: Mobility and Energy Improvements Realized through Based Vehicle Powertrain Control and Traffic Management Thomas Bradley, Colorado State University
Prediction-TI098: Transportation Energy Analytics Dashboard (TEAD)
Mark Franz, University of Maryland
ACE147: Mitigation of Knock and Low-Speed Pre-Ignition (LSPI) for
High-Power Density Engines Jim Szybist, ORNL
ACE148: Overcoming Barriers for Dilute Combustion
Brian Kaul, ORNL
ACE149: Cold-Start Physics and Chemistry in Combustion Systems for
Emissions Reduction Scott Curran, ORNL
TI103: Fuel-Efficient Platooning in Mixed Traffic Highway Environments
Jeff Rupp, American Center for Mobility
TI102: Advancing Platooning with Advanced Driver-Assistance Systems
Control Integration and Assessment Hoseinali Borhan, Cummins
ACE145: More Accurate Modeling of Heat Transfer in Internal Combustion
Engines
K Dean Edwards, ORNL
TI099: Understanding and Improving Energy Efficiency of Regional Mobility
Systems by Leveraging System-Level Data Zhen (Sean) Qian, Carnegie Mellon University
Trang 3Tuesday, June 2, Oral Presentations
Trang 4Vehicle Technologies Analysis (VAN) Electrification Technologies (ELT)
Tuesday, June 2, Oral Presentations
ELT209: High-Voltage, High-Power Density Traction-Drive Inverter
Gui-Jia Su, ORNL
ELT211: Power Electronics Thermal Management
Gilbert Moreno, NREL
ELT089: Assessing the North American Supply Chain for Traction-Drive Inverters, Motors, and Batteries for Class 3-8 Hybrid Electric and Plug-In
Electric Commercial Vehicles Chris Whaling, Synthesis Partners
ELT208: Highly Integrated Power Module Emre Gurpinar, ORNL
ELT210: Development of Next-Generation Vertical Gallium-Nitride Devices
for High-Power Density Electric Drivetrain
Greg Pickrell, SNL
ELT212: Non-Heavy Rare-Earth High-Speed Motors
Tsarafidy Raminosoa, ORNL
ELT213: High-Fidelity Multiphysics Material Models for Electric Motors
Jason Pries, ORNL
Trang 5Vehicle Technologies Analysis (VAN) Electrification Technologies (ELT)
Tuesday, June 2, Oral Presentations
VAN032: Tracking the Evolution of Electric Vehicles and New Mobility
Technology Joann (Yan) Zhou, ANL
VAN033: Transportation Macroeconomic Accounting Models: VISION and
Non-Light Duty Energy and Greenhouse Gas (GHG) Emissions Accounting
Tool (NEAT) Joann (Yan) Zhou, ANL
VAN017: ANL VTO Analysis Modeling Program
Michael Wang, ANL
VAN023: Assessing Energy and Cost Impact of Advanced Vehicle
Technologies Ram Vijayagopal, ANL
VAN018: Light-Duty Vehicle Choice Modeling and Benefits Analysis
Aaron Brooker, NREL
ELT216: Isotropic, Bottom-Up Soft Magnetic Composites for Rotating
Machines Todd Monson, SNL
VAN920: Overview of VTO Analysis Program
Jacob Ward, DOE
VAN016: Transportation Data Program
Stacy Davis, ORNL
ELT215: Permanent Magnets without Critical Rare Earths to Enable Electric
Drive Motors with Exceptional Power Density Iver Anderson, Ames LaboratoryELT214: Electric Motor Thermal Management
Kevin Bennion, NREL
Trang 6Tuesday, June 2, Oral Presentations
Trang 7Materials Technology (MAT) Battery R&D (BAT) Energy-Efficient Mobility Systems (EEMS)
BAT343: Silicon and Intermetallic Anode Portfolio
Strategy Overview Brian Cunningham, DOE
MAT166: Aluminum Purification and Magnesium
Recovery from Magnesium-Aluminum Scrap
John Hryn, ANL
MAT158: Overcoming the Barriers to
Lightweighting by Enabling Low-Cost and
High-Performance Structural Automotive Aluminum
Castings Aashish Rohatgi, PNNL
MAT126: Room-Temperature Stamping of
High-Strength Aluminum Alloys Aashish Rohatgi, PNNL
MAT142: Metal-Matrix Composite Brakes Using
Titanium Diboride Glenn Grant, PNNL
MAT134: Assembly of Dissimilar Aluminum Alloys
for Automotive Applications Piyush Upadhyay, PNNL
EEMS013: ANL Core Tools Simulation
Phil Sharer, ANL
EEMS041: ANL Core Tools Hardware Kevin Stutenberg, ANL
EEMS067: Virtual and Physical Proving Ground for Development and Validation of Future Mobility
Technologies Dean Deter, ORNL
EEMS066: Livewire Data Platform A Solution for Energy Efficient Mobility Systems (EEMS) Data
Sharing Lauren Spath Luhring, NREL
EEMS069: Next-Generation Intelligent Traffic Signal for Multimodal, Shared, and Automated
Future Andrew Powch, Xtelligent
BAT436: Silicon Electrolyte Interface Stabilization (SEISTA): Update and Overview Tony Burrell, NREL
BAT437: Silicon Electrolyte Interface Stabilization (SEISTA): Electrochemical Methods Robert Kostecki, LBNL
BAT438: Silicon Electrolyte Interface Stabilization (SEISTA): Advanced Characterization Glen Teeter, NREL
MAT127: U.S Automotive Materials Partnership
Low-Cost Magnesium Sheet Component
Development and Demonstration Project
Randy Gerken, Fiat Chrysler Automotive
MAT149: Non-Rare Earth Magnesium Bumper
Beams Scott Whalen, PNNL
MAT150: Low-Cost Corrosion Protection for
Magnesium Aashish Rohatgi, PNNL
BAT388: Silicon Deep Dive: Update and Overview
Jack Vaughey, ANL
BAT439: Silicon Deep Dive: Silicon-Based Slurries
and Electrodes Beth Armstrong, ORNL
BAT440: Silicon Deep Dive: Silicon Functionalization Zhengcheng Zhang, ANL
EEMS061: Real-Time Data and Simulation for Optimizing Regional Mobility in the United States
Jibonananda Sanyal, ORNL
EEMS037: High-Performance Computing (HPC) and Big Data Solutions for Mobility Design and
Planning Jane MacFarlane, LBNL
EEMS062: Deep-Learning for Connected and Automated Vehicle (CAV) Development Robert Patton, ORNL
Tuesday, June 2, Oral Presentations
Silicon Electrolyte Interface Stabilization (SEISTA):
Roundtable - Question & Answer
Trang 8Materials Technology (MAT) Battery R&D (BAT) Energy-Efficient Mobility Systems (EEMS)
Tuesday, June 2, Oral Presentations
BAT394: Highly Ordered Hierarchical Anodes for Extreme Fast-Charging Batteries
Neil Dasgupta, University of Michigan
EEMS085: Overview of Key Insights from SMART
Mobility 1.0 David Anderson, DOE
EEMS083: CIRCLES:Congestion Impact Reduction via CAV-in-the-loop Lagrangian Energy Smoothing Alexandre Bayen, University of California at
Berkeley
BAT392: Enabling Rapid Charging in Lithium-Ion Batteries via Integrated Acoustofluidics James Friend, University of California at San Diego
BAT386: Extreme Fast Charge Cell Evaluation of Lithium-Ion (XCEL) Batteries Venkat Srinivasan, ANL
EEMS084: Energy-Efficient Maneuvering of connected and Automated Vehicles (CAVs) with Situational Awareness at Intersections Sankar Rengarajan, Southwest Research Institute
EEMS028: Developing an Eco-Cooperative Automated Control System (Eco-CAC) Hesham Rakha, Virginia Tech
EEMS082: Validation of Connected and Automated Mobility System Modeling and
Simulation Jeffrey Rupp, American Center for Mobility
BAT393: Development of an Extreme
Fast-Charging Battery Chao-Yang Wang, Penn State University
MAT167: Corrosion Mechanisms in
Magnesium-Steel Dissimilar Joints Vineet Joshi, PNNL; Donovan Leonard, ORNL
MAT136: Performance Computing and
High-Throughput Characterizations toward
Interfaces-by-Design for Dissimilar Materials Joining
Xin Sun, ORNL; Ayoub Soulami, PNNL
MAT138: Solid-State Joining of Magnesium Sheet
to High-Strength Steel Piyush Upadhyay, PNNL; Zhili Feng, ORNL
MAT137: Adhesive Bonding of Carbon-Reinforced
Plastic to Advanced High-Strength Steel
Zhili Feng, ORNL; Kevin Simmons, PNNL
MAT139: Mechanical Joining of Thermoplastic
Carbon-Fiber Reinforced Polymer to Die-Cast
Magnesium Keerti Kappagantula, PNNL; Yong Chae Lim, ORNL
MAT151: Phase-Field Modeling of Corrosion for
Design of Next-Generation Magnesium-Aluminum
Vehicle Joints Adam Powell, Worcester Polytechnic Institute
Silicon Deep Dive: Roundtable - Question &
Answer
Trang 9Time Materials Technology (MAT) Battery R&D (BAT) Energy-Efficient Mobility Systems (EEMS)
Tuesday, June 2, Oral Presentations
Trang 10TI104: Using Real-Time Mass Transit in First-/Last-Mile Solution
Crystal Wang, Ford
10:45
AM
TI105: Multi-Modal, Energy-Optimal Trip Scheduling in Real-Time (METS-R)
for Transportation Hubs Satish Ukkusuri, Purdue University
Wednesday, June 3, Oral Presentations
ACE118: CLEERS Passive NOx Adsorber (PNA)
Janos Szanyi, PNNL
ACE027: Next-Generation Selective Catalytic Reduction (SCR)-Dosing
System Investigation Abhijeet Karkamkar, PNNL
ACE022: Joint Development and Coordination of Emissions Control Data
and Models (Cross-cut Lean Exhaust Emissions Reduction Simulations
(CLEERS) Analysis and Coordination)
Josh Pihl, ORNL
ACE023: CLEERS: Fundamentals in Selective Catalytic Reduction (SCR),
Filter, and Protocol Yong Wang, PNNL
ACE085: Low-Temperature Emission Control to Enable Fuel-Efficient Engine
Commercialization Todd Toops, ORNL
ACE033: Emission Control for Lean Gasoline Engines
Vitaly Prikhodko, ORNL
ACE153: Chemistry of Cold-Start Emissions and Impact of Emissions Control
Melanie Moses DeBusk, ORNL
ACE119: Development and Optimization of a Multi-Functional SCR-DPF
(Diesel Particulate Filter) Aftertreatment System for Heavy-Duty NOx and
Soot Emission Reduction Ken Rappe, PNNL
Trang 11Wednesday, June 3, Oral Presentations
ACE130: Development of Passive Hydrocarbon/NOx Trap Catalysts for
Low-Temperature Gasoline Applications Mark Crocker, University of Kentucky
ACE129: Design and Optimization of Structured Multi-Functional Trapping
Catalysts for Conversion of Hydrocarbons and NOx from Diesel and
Advanced Combustion Engines Michael Harold, University of Houston
ACE119: Development and Optimization of a Multi-Functional SCR-DPF
(Diesel Particulate Filter) Aftertreatment System for Heavy-Duty NOx and
Soot Emission Reduction Ken Rappe, PNNL
ACE056: Low-Temperature Oxidation Yong Wang, PNNL
ACE032: Cummins-ORNL Emissions Cooperative Research and
Development Agreement (CRADA): NOx Control and Measurement
Technology for Heavy-Duty Diesel Engines, Self-Diagnosing SmartCatalyst
Systems Bill Partridge, ORNL
ACE128: Reduced Precious Metal Catalysts for Methane and NOx Emission
Control of Natural Gas Vehicles Michael Harold, University of Houston
Trang 12Wednesday, June 3, Oral Presentations
6:45 PM
Trang 13Fuel and Lubricant Technologies (FT) Electrification Technologies (ELT)
Wednesday, June 3, Oral Presentations
ELT202: Charging Infrastructure Technologies: Smart Electric Vehicle Charging for a Reliable and Resilient Grid (RECHARGE)
Andrew Meintz, NREL
ELT257: Directed Electric Charging of Transportation using eXtreme Fast
Charging (XFC) (DIRECT XFC) Tim Pennington, INL
ELT201: Charging Infrastructure Technologies: Smart Vehicle-Grid
Integration ANL Keith Hardy, ANL
ELT200: Scalable Electric Vehicle Smart Charging Using Collaborative
Autonomy Steve Chapin, LLNL
ELT091: Cost-Effective 6.5% Silicon Steel Laminate for Electric Machines
Jun Cui, Iowa State University
FT037: Co-Optimization of Fuels and Engines (Co-Optima)
Robert Wagner, ORNL
FT067: Multi-Mode/Multi-Mode Compression Ignition : Fuel-Property
Characterization and Prediction Tim Bays, PNNL
FT088: Fuel Property Experimental Kinetics
Gina Fioroni, NREL
FT069: Multi-Mode: Fuel-Property Impacts and Limitations on
Combustion Spark Ignition Focus Derek Splitter, ORNL
FT070: Multi-Mode: From In-Cylinder Combustion Diagnostics to
Drive-Cycle Fuel Economy Magnus Sjoberg, SNL
ELT092: Wound Field and Hybrid Synchronous Machines for Electric Vehicle Traction with Brushless Capacitive Rotor Field Excitation
Ian Brown, Illinois Institute of Technology
ELT093: High-Speed Hybrid Reluctance Motor with Anisotropic Materials
Edwin Chang, General Motors
FT071: Multi-Mode Operation in Gasoline Direct-Injection Engines:
Fuel-Property Effects and Approaches to Expand the Advanced
Compression-Ignition Range Toby Rockstroh, ANL
FT072: Multi-Mode: Desired Fuel Properties for Advanced
Compression-Ignition and Spark-Compression-Ignition Engine Performance
Chris Kolodziej, ANL
FT073: Co-Optima Emissions and Emissions Control for Spark Ignition and
Advanced Compression Ignition Multi-Mode Combustion
Sreshtha Sinha Majumdar, ORNL
ELT082: Highly Integrated Wide Bandgap Power Module for Next
Generation Plug-In Vehicles John Czubay, General Motors
Trang 14Fuel and Lubricant Technologies (FT) Electrification Technologies (ELT)
Wednesday, June 3, Oral Presentations
FT089: Heavy-Duty Advanced Compression Ignition
John Dec, SNL
ELT189: Electric Truck with Range-Extending Engine (ETREE)
Jesse Dalton, Cummins
ELT190: Medium-Duty Urban Range Extended Connected Powertrain
(MURECP) Matthew Thorington, Bosch
ELT158: Zero-Emission Cargo Transport II: San Pedro Bay Ports Hybrid &
Fuel-Cell Electric Vehicle Project Seungbum Ha, SCAQMD
ELT191: Medium-Duty Vehicle Powertrain Electrification and
Demonstration Wiley McCoy, McLaren
ELT257: Directed Electric Charging of Transportation using eXtreme Fast
Charging (XFC) (DIRECT XFC) Tim Pennington, INL
ELT258: Grid-Enhanced, Mobility-Integrated Network Infrastructures for
Extreme Fast Charging (GEMINI-XFC) Matteo Muratori, NREL
ELT115: Zero-Emission Cargo Transport I: Zero Emission Drayage Trucks
Phil Barroca, SCAQMD
FT074: Multi-Mode: Gasoline Direct-Injection Sprays
FT077: Heavy-Duty Mixed-Controlled Compression Ignition: Fuel Effects
and Ducted Fuel Injection Charles Mueller, SNL
FT078: Heavy-Duty Mixed-Controlled Compression Ignition: Impacts of Fuel
Properties on Combustion, Injection Characteristics, and Emissions
Controls Martin Wissink, ORNL
FT073: Co-Optima Emissions and Emissions Control for Spark Ignition and
Advanced Compression Ignition Multi-Mode Combustion
Sreshtha Sinha Majumdar, ORNL