1. Trang chủ
  2. » Luận Văn - Báo Cáo

Tài liệu Báo cáo khoa học: Solution NMR structure of five representative glycosylated polyene macrolide antibiotics with a sterol-dependent antifungal activity doc

9 525 0
Tài liệu đã được kiểm tra trùng lặp

Đang tải... (xem toàn văn)

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Tiêu đề Solution NMR Structure Of Five Representative Glycosylated Polyene Macrolide Antibiotics With A Sterol-Dependent Antifungal Activity
Tác giả Laurent Volpon, Jean-Marc Lancelin
Trường học Université Claude Bernard – Lyon 1
Chuyên ngành Biochemistry
Thể loại báo cáo khoa học
Năm xuất bản 2002
Thành phố Villeurbanne
Định dạng
Số trang 9
Dung lượng 334,29 KB

Các công cụ chuyển đổi và chỉnh sửa cho tài liệu này

Nội dung

Solution NMR structure of five representative glycosylated polyene macrolide antibiotics with a sterol-dependent antifungal activity Laurent Volpon and Jean-Marc Lancelin Laboratoire de

Trang 1

Solution NMR structure of five representative glycosylated polyene macrolide antibiotics with a sterol-dependent antifungal activity

Laurent Volpon and Jean-Marc Lancelin

Laboratoire de RMN Biomole´culaire associe´ au CNRS, Universite´ Claude Bernard – Lyon 1 and Ecole Supe´rieure de Chimie Physique & Electronique de Lyon, Villeurbanne, France

Glycosylated polyene macrolide antibiotics, as nystatins and

amphotericins, are amphiphilic structures known to exert

antifungal activity by disrupting the fungal cell membrane,

leading to leakage of cellular materials, and cell death This

membrane disruption is strongly influenced by the presence

and the exact nature of the membrane sterols The solution

structures of five representative glycosylated members, three

tetraenes (pimaricin, nystatin A1and rimocidin) and two

heptaenes (candidin and vacidin A) have been calculated

using geometric restraints derived from1H-NMR data and

random searches of their conformational space Despite a

different apparent structural order, the NMR solutions structure indicate that the hydroxyl groups all clustered on one side of the rod-shaped structures, and the glycosyl moieties are structurally conserved both in their conforma-tion and their apparent order The molecular structures afford an understanding of their selective interaction with the membrane sterols and the design of new polyene macrolides with improved activities

Keywords: antifungal antibiotics; polyene macrolides; sterol-dependant antibiotics; NMR solution structure; 1, 3-polyols

The vast family of polyenes antibiotics [1,2] includes

amphiphilic compounds mostly produced by Streptomyces

species with potent antifungal properties Polyene

macro-lides are of an authentic clinical value for efficient therapies

against animals, and human infectious diseases caused by

pathogenic fungi In particular, nystatin A1, amphotericin

B, and pimaricin (natamycin) are the most common

polyene macrolides used for the treatment of fungal

infections Due to its particular low toxicity, pimaricin

also has been used for a decade as a food preservative [3,4]

allowed in the European Union (additive E235) and

USA for preserving foods from mold contamination and

possible inherent risks of mycotoxin poisoning The

polyene macrolides target the cytoplasmic membranes of

fungi where they interact selectively with ergosterol,

causing a major disorganization of the membrane structure

[5] leading to the leakage of cellular materials and in turn

the cellular death

Depending on their molecular structures, polyene

macrolides have a more or less toxicity, in part due to a

residual interaction with cholesterol in mammalian

cyto-plasmic membranes This gives to polyene macrolides

therapies undesired hemolytic and nephrolytic side-effects

Other relevant effects assigned to some polyene

macro-lides, such as antiviral properties against several groups of

enveloped viruses [6,7] or stimulation of the immune

response at lower concentrations [8,9], have been also

reported These activities make of polyene macrolides a source of lead structures for the engineering of future molecules with improved medicinal purposes In parti-cular, the gene clusters involved in the biosynthesis of pimaricin in S natalensis [10,11] and nystastin in S nour-sei [12] have been recently cloned and new models for their biosynthetic pathways been proposed These new insights make bioengineering possible for new polyene macrolides in addition to chemical synthesis

Despite their discovery over 50 years ago, the under-standing of the selective affinity of polyenes macrolides for sterols in biomembranes has yet no experimental molecular explanation at atomic resolution The con-formational analysis of different members of the polyene family is one important step essential in understanding their structure-to-activity relationships Three-dimen-sional structures of only three polyene macrolides of disparate nature and activity, have been described to date Amphotericin B [13,14] and roxaticin [15] were solved by crystallography, while filipin III was solved using solution NMR [16]

Full stereochemical information (with the exception of one chiral center at position 42 of the vacidin A side chain, Fig 1) are available for at least five polyene macrolides that belong to a group of polyenes specifically glycosylated by mycosamine, a hexose of theD-series The glycosylation by

an amino sugar occurs near a carboxylic acidic function of the macrolide, so that these polyene macrolides are zwiter-ionic in addition to being amphiphilic Nystatin A1was the first polyene macrolide discovered [17] Its covalent struc-ture (without stereochemistry) was confirmed in 1970 [18] and 1971 [19] Pimaricin, or natamycin [20], was isolated in

1957 [21] and its covalent structure was established by Golding et al [22] Rimocidin from S rimosus was reported

in 1951 [23] and its covalent structure finally described in

1977 [24] Vacidin A, one of the main components of the aureofacin complex from S aureofaciens, belongs to the

Correspondence to J.-M Lancelin, Laboratoire de RMN

Biomole´culaire, Universite´ Claude-Bernard – Lyon 1, Domaine

Scientifique de La Doua, CPE – Lyon, 43, boulevard du 11 Novembre

1918, F-69622 Villeurbanne cedex, France.

Fax/Tel.: + 33 4 72 43 1 3 95,

E-mail: lancelin@hikari.cpe.fr

Abbreviation: ROE, rotating frame Overhauser effect.

(Received 11 March 2002, revised 17 July 2002, accepted 23 July 2002)

Trang 2

aromatic macrolide group [25] Finally, candidin is a

main component of the antibiotic complex produced by

S viridoflavus[26] These five polyene macrolides have a

26-to 38-membered macrolac26-tone ring, containing a polyol

and a polyene part, which is the origin of their amphiphilic

nature, and a D-mycosamine sugar (Fig 1) Asymmetric

centers of these five glycosylated polyenes were

character-ized by of NMR spectroscopy and stereo-controlled organic

synthesis for nystatin A1[27,28], pimaricin [29,30],

rimo-cidin [31], varimo-cidin A [32] and candidin [33]

We took the advantage of the complete knowledge of the

stereochemical information of these five polyene macrolides

to study their conformation in solution, using NMR and

molecular modeling protocols used to explore the

confor-mation space of biopolymers [34] We report herein, the first

comparative solution NMR structures of these five

repre-sentative 26–38-membered polyene macrolides glycosylated

byD-mycosamine

M A T E R I A L S A N D M E T H O D S NMR experiments

Nystatin A1sample was obtained from Dr C Cimarusti, The Squibb Institute for Medical Research (Princeton, New Jersey, USA) [35] and rimocidin (Pfizer Lot #4157-47-2) from Prof Kenneth L Rinehart, University of Illinois (Urbana-Champaign, Illinois, USA) The antibiotic solu-tions were prepared under dry argon in methanol-d4 at 3–5 mMconcentration All NMR spectra were recorded at

25C on a Bruker Avance DRX 500 spectrometer (1H¼ 500 MHz) using a 5-mm (1H, 13C, 15N) triple-resonance probe head, equipped with a supplementary self shielded z-gradient coil Spectra were processed using Bruker XWINNMR and GIFA V.4 [36] software Homo-nuclear two-dimensional spectra DQF-COSY [37], TOCSY (HOHAHA) [38,39] and ROESY [40,41], were recorded with a 1.5-s recovery delay in the phase-sensitive mode using the States-TPPI method [42] as data matrices of 512 (t1)· 1024 (t2) complex data points Mixing times of

80 ms for TOCSY and 250 ms for ROESY spectra were used The spectral width in both dimensions was 3500 Hz The data were apodized with shifted sine-bell and Gaussian window functions in both F1and F2dimensions after zero-filling in the t1dimension to obtain a final matrix of 1024 (F1)· 1024 (F2) real data points Chemical shifts were referenced to the solvent chemical shift (CHD2OD,d (1H)¼ 3.31p.p.m.)

For heteronuclear spectroscopy, phase-sensitive 13 C-heteronuclear single quantum coherence [43] were recorded with a 1.5-s recovery delay using the echo-antiecho method [44] The coherence pathway selection was achieved by applying pulsed-field gradients as coherence-filters [45,46] The FID was collected as a data matrix of 512 (t1,

13C)· 1024 (t2, 1H) complex data points and 150 scans per t1increment Spectral widths were 3500 Hz in F2and

17450 Hz in F1with carrier frequencies at 3.7 and 70 p.p.m., respectively

For the other three polyenes, the NMR data at

1H¼ 300 MHz were taken from the literature where complete1H-NMR assignment and experimental restraints are available Pimaricin was studied in methanol-d4[29,30], candidin in a methanol-d4/pyridine-d5/DMSO-d6(2 : 2 : 1 , v/v) mixture [33], vacidin A in a pyridine-d5/methanol-d4

(9 : 1, v/v) mixture [32]

Experimental NMR restraints For nystatin A1, pimaricin, rimocidin and vacidin A, all the interproton-distance restraints between non J-coupled pro-tons, are derived from the two-dimensional homonuclear ROESY experiments Interproton restraints were classified into three categories Upper bounds were fixed at 2.8, 3.3 and 4.0 A˚ for strong, medium and weak correlations, respectively For candidin, each of the ROE correlations were considered as weak correlations as no information concerning the ROEs relative intensity were given [32] A lower bound was fixed at 1.8 A˚, which corresponds to the sum of the hydrogen van der Waals’ radii The intensity of a

Hi) Hi+2ROEs within the polyene part was considered as reference intensity for strong correlations [29,30] Pseudo atom corrections [47] of the upper bounds were applied for

Fig 1 Molecular structures (A) Pimaricin (B) nystatin A1(C)

rimo-cidin (with R 1 : CH 2 –CH 3 ; R 2 : CH 2 –CH 2 –CH 3 ) (D) candidin and (E)

vacidin A R or S absolute configurations are indicated for asymmetric

centers Carbons are numbered according to their position in the

macrolide sequence Primed indices are assigned to the D -mycosamine

glycoside on the right.

Trang 3

distance restraints involving the unresolved methylene and

methyl protons (+1A˚) For nonstereospecifically assigned

but spectroscopically resolved diastereotopic methylene

protons, the interproton distances were treated as single

(Ær)6æ))1/6 average distances When possible, H–C–C–H

dihedral angle were restrained to dihedral domains

accord-ing to the different 3JHC,CH coupling constants measured

using optimized Karplus dihedral relations [16] When

different or very large domains were deduced, some of them

could be further restricted from intermediate structure

calculations without dihedral restraints If the resulting

models with acceptable energy (see Results) gave a

parti-cular dihedral value compatible with the 3JHC,CH, the

corresponding restraint was applied in a narrower domain

The smallest final dihedral domains were not more restricted

than an arbitrary value of ± 20 (Table 3) in case of a

correct match between the dihedral angles and the measured

couplings If the dihedral value in the intermediate models

was too dispersed, no further restriction was applied

Structure calculations

Models were calculated using theX-PLORsoftware version

3.851[48] as previously described [16] Initial atomic

coordinates and structure files for each polyene macrolides

were generated step by step (given as supporting

informa-tion) from the X-PLOR libraries and topology files of

different parts of other molecules taken from the Protein

Data Bank [49] For each molecule, the atoms involved in

of the lactone function (C–CO–O–C) were maintained in a

plane The hemi-ketal 6-membered rings of the macrolides

were maintained in a chair conformation by definition of

suitable improper angle restraints The results were

visu-alized using the programMOLMOLversion 2.4 [50] Starting

from 30 randomized coordinates, the sampling of the

conformational space was performed following a simulated

annealing protocol (random SA) proposed by Nilges et al

[51] The simplified allhdg.pro force field of X-PLOR was

used The nonbonded van der Waals’ interactions were

represented by a simple repulsive quadratic term [34,51]

The experimental distance restraints were represented as

a soft asymptotic potential, and electrostatic interactions

were ignored The force constant associated with the

distance restraints was kept to 50 kcalÆmol)1ÆA˚)2

through-out the protocol One cycle of random SA consisted of

1500 steps of 3 fs at 1000 K followed by 3000 cooling steps

of 1fs from 1000 K to 100 K At the end, each structure

was subjected to 1500 steps of conjugate gradient energy

minimization

R E S U L T S

NMR assignments of nystatin A1 and rimocidin in

methanol-d4

The structure-specific assignment of the 1H and 13C

resonances of nystatin A1and rimocidin in neat

meth-anol-d4(Table 1) were carried out based on the

identifica-tion of various unambiguous resonances These signals were

used as starting points for the complete assignments In

particular, for nystatin A1, starting points were: (a) the

well-defined scalar correlations between the two methylene

protons at C28 and C29 with their neighboring CH (Fig 2);

(b) the narrow resonance of the anomeric proton H1¢ of the

D-mycosamine which is located near d 4.6 p.p.m., and weakly dependent upon the solvent or polyene macrolide nature (Fig 3); and (c) methyl, ethyl or propyl resonances in the aliphatic region (d 0.95–1.25 p.p.m.) located near the lactone function

NMR-derived geometric restraint

In addition to the regular H–C–C–H dihedral restraints derived from the 3J coupling constants, a particular geometric restraint could be applied for the structure calculation of pimaricin Indeed, a long-range coupling constant4JHO9,H10a¼ 0.5–1Hz was already non ambigu-ously assigned [30] to a specific coplanar disposition of the H10a–C10–C9–O9–H9 atoms in the so-called W-arrange-ment [52] The dihedral angle restraints derived from NMR data in neat methanol for nystatin A1and rimocidin are summarized in Table 2 Due to some spectrally degenerate proton resonances in the polyene and the polyol regions, complete extraction of the J coupling constants and the ROE information was not possible The total number of interproton distance restraints derived from the NMR data was 21, 22, 25, 20 and 50 distance restraints for pimaricin (data from [30]), nystatin A1(this study, Table 1), rimocidin (this study, Table 1), candidin (data from [33]) and vacidin

A (data from [32]), respectively

Structure calculations for the five glycosylated macrolide polyenes

From the 30 structures calculated, 21, 25, 29, 25 and 29 were retained, respectively, for pimaricin, nystatin A1, rimocidin, candidin and vacidin A on the basis of their low experimental and nonexperimental potential energies (Ftotal< 1 2 kcalÆmol)1) The models had no ROE viola-tions greater than 0.1A˚ nor dihedral violaviola-tions greater than 5 Structural statistics are given in Table 3

Structural analysis of pimaricin The superposition for a minimum rmsd of the pimaricin heavy atoms led to a single type of main-chain conforma-tion (Fig 4A, left) This is likely due in part to the particular macrolactone ring of pimaricin, which is the smallest of the series studied here This can afford an intrinsic constraint leading to a single conformer under the NMR restraint The lactone function with the conjugated C2–C3 double bond, the C4–C5 epoxide function, the chair conformation of the C9–C13 heterocycle and the conjugated tetraene C16–C23, altogether form a tightly constrained molecular topology This topology, in addition to the experimental restraints deduced from ROEs (Table 1) and3Jinformation (Table 2) give a very high apparent structural order The analysis of the model ensemble indicates, a possible hydrogen bond between the hydrogen of OH9 (HO9) and the oxygen of OH7 (OH7) which can contribute to the stabilization of the C7–C9 region of the macrolide

Structural analysis of nystatin A1 The spectral degeneracy of1H resonances in the polyol as well as in the polyene parts, precluded the derivation of

Trang 4

structural restraints within and between these two structural

regions Therefore, the 25 final models of nystatin A1

appeared well ordered in only two regions: the C11–C27

which is used for the superposition for a minimal atomic

rmsd in Fig 4B (left) and in Table 3, and the C30–C1

segment near the lactone function An apparent strong

structural and local disorder is present in the C2–C10 polyol

segment as well as for the two methylenes C28 and C29 at

the junction between the tetraene C20–C27 and the diene C30–C33 The absence of experimental restraints in these two regions and the conformational space allowed to the C2–C10 and C28–C29 segments give a strong apparent disorder as shown in Fig 4 Correlated to this feature, from the six hydroxyl and the carbonyl of the C1–C13 segment of nystatin A1, only the two hydroxyl groups at C11 and C13 are hydrogen bonded in the models (Fig 4B, left) Other

Table 1 1 H and 13 C NMR assignments and ROEs of nystatin A1 and rimocidin (in MeOH-d 4 , 25 °C).

Nystatin A1

Position

d 1Ha

(p.p.m.)

d 13Ca (p.p.m.) ROEs b

Rimocidin Position

d 1Ha (p.p.m.)

d 13Ca (p.p.m.) ROEs b

H18 d

, H1¢ e

, H2¢ e

, H36¢ d , H37 e

, H5¢ c

a

Accuracy of the chemical shifts measured are ± 0.02 p.p.m and ± 0.2 p.p.m., respectively.bThe ROEs connectivities are listed once according to the proton having the lower number Intensity of the ROEs are strong ( c ), medium ( d ) or weak ( e ) f Refers to the pseudo-axial (ax) or pseudo-equatorial (eq) orientation of these protons relative to the average plane of the macrocycle.

Trang 5

hydrogen bonds between the other hydroxyl groups appear

only erratically

Structural analysis of rimocidin

The small number of restraints that could be applied in the

region of C4–C8 segment and for the two aliphatic side

chains (Table 2; Fig 1) yielded a number of different

possible conformers in the C27–C8 polyol segment

(Fig 4C, left) The CO groups of C1and C5 are spread

into two major conformations, which are near mirror

images each from the other A hydrogen bond between

hydroxyl groups on C9 and C11 (HO11–OH9) was detected

in 11 out of the 29 models

Structural analysis of candidin

As for rimocidin, the polyol part appears the most disordered (Fig 4D, left) However, for the C1–C7 segment, the two hydroxyl groups on C3 and C5 are, respectively, hydrogen bonded with the CO groups of C1and C7 in the majority of the models For the C10–C13 segment, the hydroxyl groups on C11 and C13 form alternatively a

HO13–OH1 1 or a HO11–OH13 hydrogen bond The absence

of information concerning the ROEs relatives intensities (Material and methods; and [33]) is most likely the origin of moderate order of the mycosamine moiety as this region is structurally conserved compared to the other polyene macrolides of this study (Fig 4, right)

Structural analysis of vacidin A The number of experimental restraints available [32] was large for vacidin A, and the 29 final models appear well ordered, except for the aromatic side chain which is spread

in random conformations (Fig 4E, left) As for the four previous polyene macrolides, no experimental information

Table 2 Angle restraints deduced (see the text) from J coupling constants for nystatin A1 and rimocidin (500 MHz) in MeOH-d 4 , 25 °C.

J coupling constantsa Angle applied for the calculation

3 J H17–H18eq ¼ 1 Hz H17–C17–C18–H18eq ¼ )90 ± 20

3

J H18ax–H19 ¼ 1.5 Hz H18ax.–C18–C19–H19 ¼ +90 ± 20

3 J H19–H20 ¼ 8.0 Hz H19–C19–C20–H20 ¼ 180 ± 40

3 J H33–H34 ¼ 8.5 Hz H33–C33–C34–H34 ¼ 180 ± 30

3

3 J H13–H14 ¼ 10.7 Hz H13–C13–C14–H14 ¼ 180 ± 20

3

3

J H15–H16eq ¼ 1 Hz H15–C15–C16–H16eq ¼ )90 ± 20

3 J H16ax.–H17 ¼ 1 Hz H16ax.–C16–C17–H17 ¼ + 90 ± 20

3 J H17–H18 ¼ 8.5 Hz H17–C17–C18–H18 ¼ 180 ± 20

a

Accuracy of the J coupling constants measured is ± 0.2 Hz.

Fig 2 Ethylenic-to-aliphatic region (F 2 , F 1 axis) of the phase sensitive

DQF-COSY spectrum of nystatin A1, 3 m M in MeOH-d 4 recorded at

500 MHz and 25 °C The F 1 noise strip at d 3.31and 4.87 p.p.m are

due to residual signals of the solvent The two numbers indicated near

the cross peaks correspond to the numbering indicated in Fig 1of the

protons correlated in the F 1 and F 2 axis, respectively.

Fig 3. 1H NMR spectrum of nystatin A1, 3 m M in MeOH-d 4 recorded

at 1 H-500 MHz and 25 °C Resonance lines are labeled according to the hydrogen numbering indicated in Fig 1 Asterisks indicate residual signals of the solvent (d 3.31and 4.87 p.p.m.).

Trang 6

are available about the conformation of hydroxyl groups

as they are fully exchanged with the solvent (pyridine-d5/

methanol-d4(9 : 1, v/v) mixture) However, the

conforma-tion of the macrolide backbone in the polyol part and the

1,3-syn configuration of the hydroxyl groups from C7 to

C15 allow a hydrogen bond network involving HO7 to

OH1 5 or HO15 to O5 in the majority of the models The

O38-C4 segment is little more disordered and two

confor-mations were found for the lactone group, which are mirror

images each from the other as for rimocidin

D I S C U S S I O N Solution structures of five polyene macrolides, glycosylated

by D-mycosamine have been calculated under NMR-derived geometric restraints The solubilities of polyene macrolides are too low in water for NMR purpose and the NMR studies were carried out in various polar organic solvents The five glycosylated polyene antibiotics chosen, are representative of the polyene macrolide family due to their pronounced antifungal activities and their different

Table 3 Structural statistics for the pimaricin and nystatin A1.

Cartesian coordinate rmsd (A˚) vs the average geometric structurea

Potential energiesb in kcalÆmol)1calculated from X-PLOR – allhdg.pro

F total 11.86 (± 0.53) 7.85 (± 0.42) 8.37 (± 0.50) 6.51 (± 0.58) 9.11 (± 0.72)

F angle 7.29 (± 0.23) 6.32 (± 0.20) 5.48 (± 0.21) 5.08 (± 0.32) 6.23 (± 0.38)

a rmsd are calculated for backbone heavy atoms (C) without the side chains (in bracket are given the segment corresponding to the rmsd value) b F bond is the bond-length deviation energy; F angle is the valence angles deviation energy; F impr deviation energy for the improper angles used to maintain the planarity of certain groups of atoms; F VDW is the van der Waals energy function; F roe is the experimental ROE function calculated using a force constant of 25 kcalÆmol)1ÆA˚)2in the case of the CHARMM22 force field, and F cdih is the experimental function corresponding to the violation of the dihedral angle restraints In bracket are given the rmsd for certain energetic terms.

Fig 4 Stereoviews of the final NMR models Left: pimaricin (A), nystatin A1(B), rimocidin (C), candidin (D) vacidin A (E) Right: Views

of the NMR ensembles, seen along the long axis of the polyene with the D -mycosamine front (indicated with an arrow) The bonds of the hydroxyl groups are represented with bold lines Carbons are labelled according to their numbering indicated in Fig 1 Models are superposed for a minimum rmsd as indicated

in Table 3.

Trang 7

macrolactone ring sizes Two of them, nystatin A1and

pimaricin, are used for human therapies against pathogenic

fungi Pimaricin is the smallest molecule with a

26-membered ring and vacidin A the largest with a

38-membered macrolactone ring

The five NMR ensembles have different apparent

struc-tural order: nystatin A1appears (Fig 4) the most

disor-dered Due to the lack of direct evidence of conformational

averaging, the apparent disorder in the nystatin models

cannot be discussed in terms of structural dynamics The

unrestricted two saturated carbons C28 and C29, are

however, a possible source of conformational variation by

rotation around the axis of the saturated C28–C29 bond

The terminal region C34 to C37 region next to the diene

appears well ordered locally and relative to the C30–C33

diene as previously observed [28] The other four polyene

macrolides do not have these saturated carbons within their

polyene parts These polyenes are fully conjugated and are

consequently more conformationally restricted The planar

conjugated polyenes are certainly the important elements

contributing to the high structural order found in the

models of pimaricin, rimocidin, candidin and vacidin A

The extended polyenes constrain the polyol segments of the

macrolactone ring to adopt an almost linear staggered

conformation to satisfy the ring closure Altogether, this

gives rise to the rod-shaped amphiphilic structure, common

to all polyene macrolides We should note in addition, that

the staggered and extended conformation of regular syn

1,3-polyol motifs was proven stable only in apolar media where

intramolecular regular hydrogen bonds were found to

stabilize this sort of conformation [16,35] In the presence of

competing interactions with polar, protic or aprotic

sol-vents, van der Waals repulsion dominate and the

1,3-polyols twist to form more stable gauche conformers

The case of the nystatin A1is interesting regarding its

interaction with the sterols and its incorporation into

membranes Unlike to filipin III, a polyene antibiotic

belonging to the group of nonglycosylated polyene

macro-lides with well-defined conformation [16], the penetration

of nystatin [53], as well as amphotericin B [54], into a

dilauroylphosphotidylcholine membrane is not possible

without the presence of sterols The conformational

variability in the nystatin models gives a better overall

solvent accessibility to the hydroxyl groups in the C1–C17

region We note that this feature correlates to the 10-fold

greater solubility in methanol of nystatin A1relative to

amphotericin B Amphotericin B is structurally very close

to nystatin A1 It differs basically by a fully conjugated

heptaene segment instead of the potentially flexible polyene

motif of nystatin A1 Keeping in mind the greater

acces-sibility of the hydroxyls, we hypothesize that nystatin A1

would only insert into a membrane containing sterols after

the formation of nystatin-sterols complexes at the

mem-brane surface Such complexes would then yield more rigid

molecular edifices, less solvated by water, and in turn more

favorable to the antibiotic insertion in the membrane

A common feature appears upon comparison of the five

polyenes macrolide solution structures To illustrate this, we

have represented in Fig 4 (right) the overlays of the

different NMR ensembles The structures are seen from

the zwiterionic-head, in the polyene plane common to each

antibiotic From this orientation, we observed that the

hydroxyl groups are clustered on one side of the plane, or

even on a single axis, parallel to the long axis of the macrolide (pimaricin and vacidin, Fig 4, right) This correlates also very well with the crystal structure of amphotericin B [14] and the filipin III structure [16] Another structural character shared by the five macrolides,

is theD-mycosamine glycosyl moities always located on the opposite side of the polyene plane

Noteworthy, these common structural features are conserved, regardless of the solvent used to collect the NMR data The solvents include neat methanol for pimaricin, nystatin A1and rimocidin ([29,30] and this study); a ternary mixture of methanol/pyridine/DMSO (2 : 2 : 1) for candidin [33]; and a binary mixture of pyridine/methanol (9 : 1) for vacidin A [32] Clearly, the polyene macrolides share a specific topology of the polar hydroxyls due to a strong intrinsic geometric constraint This constraint is independent of the solvent and relies on the structure of the macrolide itself The common struc-tural feature is then likely conserved when the polyenes are transferred from the aqueous compartment to the biomembranes

The five NMR solution structures described here, are important steps in the rationalization of their selective affinity for sterols in biomembranes, and in the design of new polyene macrolides [55] with improved properties

A C K N O W L E D G E M E N T S

L.V is recipient of a PhD fellowship 1998–2001 from the French Ministe`re de l’Education Nationale de la Recherche et de la Technologie We thank Dr C Cimarusti, The Squibb Institute for Medical Research, Princeton, New Jersey and Prof K L Rinehart, University of Illinois at Urbana-Champaign, Illinois, USA for the generous gift of nystatin A1and rimocidin, respectively.

R E F E R E N C E S

1 Omura, S & Tanaka, H (1 984) Macrolides Antibiotics: Chemistry, Biology and Practice (Omura, S., ed), pp 341–404 Academic Press, New York.

2 Kobayashi, G.S & Medoff, G (1977) Antifungal agents: recent developments Annu Rev Microbiol 31, 291–308.

3 Hui, H., (1991) Encyclopedia of Food Science and Technology John Wiley & Sons, Inc, New York.

4 Dillon, V.M & Board, R.G (1994) Natural Antimicrobial Systems and Food Preservation CAB International, Wallingford.

5 Norman, A.W., Spielvogel, A.M & Wong, R.G (1976) Polyene antibiotic–sterol interaction Adv Lipid Res 14, 127–171.

6 Kessler, H.A., Dixon, J., Howard, C.R., Tsiquaye, K & Zuckerman, A.J (1981) Effects of amphotericin B on hepatitis B virus Antimicrob Agents Chemother 20, 826–833.

7 Malewicz, B., Momsen, M., Jenkin, H.M & Borowski, E (1984) Potentiation of antiviral activity of acyclovir by polyene macrolide antibiotics Antimicrob Agents Chemother 25, 772–774.

8 Bolard, J (1986) How do the polyene macrolide antibiotics affect the cellular membrane properties? Biochim Biophys Acta 864, 257–304.

9 Little, J.R., Blanke, T.J., Valeriote, F & Medoff, G (1978) Immune Modulation and Control of Neoplasia by Adjuvant Therapy (Chirigos, A., ed), pp 381 Raven Press, New York.

10 Aparicio, J.F., Colina, A.J., Ceballos, E & Martin, J.F (1999) The biosynthetic gene cluster for the 26-membered ring polyene macrolide pimaricin A new polyketide synthase organization encoded by two subclusters separated by functionalization genes.

J Biol Chem 274, 10133–10139.

Trang 8

11 Aparicio, J.F., Fouces, R., Mendes, M.V., Olivera, N & Martin,

J.F (2000) A complex multienzyme system encoded by five

polyketide synthase genes is involved in the biosynthesis of the

26-membered polyene macrolide pimaricin in Streptomyces

natalensis Chem Biol 7, 895–905.

12 Brautaset, T., Sekurova, O.N., Sletta, H., Ellingsen, T.E., Strøm,

A.R., Valla, S & Zotchev, S.B (2000) Biosynthesis of the polyene

antifungal antibiotic nystatin in Streptomyces noursei ATCC

11455: analysis of the gene cluster and deduction of the

biosyn-thetic pathway Chem Biol 7, 395–403.

13 Mechlinski, W., Schaffner, C.P., Ganis, P & Avitabile, G (1970)

Structure and absolute configuration of the polyene macrolide

antibiotic amphotericin B Tetrahedron Lett 44, 3873–3876.

1 4 Ganis, P., Avitabile, G., Mechlinski, W & Schaffner, C.P (1 971 )

Polyene macrolide antibiotic amphotericin B Crystal structure of

the N-iodoacetyl derivative J Am Chem Soc 93, 4560–4564.

1 5 Maehr, H., Yang, R., Hong, L.N., Liu, C.M., Hatada, M.H &

Todaro, L.J (1989) Microbial Products 9 Roxaticin, a new oxo

pentaene antibiotic J Org Chem 54, 3816–3819.

16 Volpon, L & Lancelin, J.-M (2000) Solution NMR structures

of the polyene macrolide antibiotic filipin III FEBS Lett 478,

137–140.

17 Hazen, E.L & Brown, R (1950) Two antifungal agents produced

by a soil actinomycete Science 112, 423.

18 Chong, C.N & Rickards, R.W (1970) Macrolide antibiotic

stu-dies XVI The structure of nystatin Tetrahedron Lett 59, 51 45–

5148.

19 Borowski, E., Zielinski, J., Falkowski, L., Ziminski, T., Golik, J.,

Kolodziejczyk, P., Jereczek, E., Gdulewicz, M., Shenin, Y &

Kotienko, T (1971) The complete structure of the polyene

mac-rolide antibiotic nystatin A1 Tetrahedron Lett 60, 685–692.

20 Oroshnik, W & Mebane, A.D (1963) Polyene macrolides from

actynomycetes Prog Chem Org Nat Prod 21, 18–79.

21 Struyk, A.P., Hoette, I., Drost, G., Waisvisz, J.M., Van Eek, J &

Hoogerheide, J.C (1958) Antibiotics Annual, 1957–1958 (Welch,

H & Marti-Ibanez, F., eds) Medical Encyclopaedia, New-York.

22 Golding, B.T., Rickards, R.W., Meyer, W.E., Patrick, J.B &

Barber, M (1966) The structure of the macrolide antibiotic

pimaricin Tetrahedron Lett 30, 3551–3557.

23 Davisson, J.W., Tanner, F.W Jr, Finlay, A.C & Solomons, I.A.

(1951) Rimocidin, a new antibiotic Antibiot Chemoth 1, 289–290.

24 Pandey, R.C & Rinehart, K.L Jr (1977) Polyene antibiotics VIII.

The structure of rimocidin J Antibiot 30, 146–157.

25 Igarashi, S., Ogata, K & Miyake, A (1956) Studies on

Strepto-myces An antifungal substance produced by Streptomyces

aureofaciens J Antibiot Series B 9, 79–80.

26 Taber, W.A., Vining, L.C & Waksman, S.A (1954) Candidin, a

new antifungal antibiotic produced by Streptomyces virdoflavus.

Antibiot Chemother 4, 455.

27 Prandi, J & Beau, J.-M (1989) Stereostructure of nystatin A1: a

synthetic assigment of the C1–C10 fragment Tetrahedron Lett 30,

4517–4520.

28 Lancelin, J.-M & Beau, J.-M (1989) Complete stereostructure of

nystatin A1: a proton NMR study Tetrahedron Lett 30, 4521–

4524.

29 Lancelin, J.-M & Beau, J.-M (1990) Stereostructure of pimaricin.

J Am Chem Soc 112, 4060–4061.

30 Lancelin, J.-M & Beau, J.-M (1995) Stereostructure of

glycosy-lated polyene macrolides: the example of pimaricin Bull Soc.

Chim Fr 132, 215–223.

31 Sowinski, P., Pawlak, J., Borowski, E & Gariboldi, P (1995)

Stereostructure of rimocidin J Antibiot 48, 1288–1291.

32 Sowinski, P., Gariboldi, P., Czerwinski, A & Borowski, E (1989)

The structure of vacidin A, an aromatic heptaene macrolide

antibiotic I Complete assignment of the 1 H NMR spectrum and

geometry of the polyene chromophore J Antibiot 42, 1631–1638.

33 Pawlak, J., Sowinski, P., Borowski, E & Gariboldi, P (1993) Stereostructure and NMR characterization of the antibiotic can-didin J Antibiot 46, 1598–1604.

34 Bru¨nger, A.T & Karplus, M (1991) Molecular dynamics Simu-lations with experimental restraints Acc Chem Res 24, 54–61.

35 Lancelin, J.-M., Paquet, F & Beau, J.-M (1988) Stereochemical studies on the polyene macrolide nystatin A1: the hydroxyl groups

in the C1–C10 fragment are all-syn Tetrahedron Lett 29, 2827– 2830.

36 Pons, J.L., Malliavin, T.E & Delsuc, M.-A (1996) GIFA V.4: a complete package for NMR data set processing J Biomol NMR

8, 445–452.

37 Rance, M., Sørensen, O.W., Bodenhausen, G., Wagner, G., Ernst, R.R & Wu¨thrich, K (1983) Improved spectral resolution in COSY 1 H NMR spectra of proteins via double quantum filtering Biochem Biophys Res Commun 117, 479–485.

38 Braunschweiler, L & Ernst, R.R (1983) Coherence transfer by isotropic mixing: application to proton correlation spectroscopy.

J Magn Reson 53, 521–528.

39 Davies, D.G & Bax, A (1985) Assignment of complex1H NMR spectra via two-dimensional homonuclear Hartmann-Hahn spec-troscopy J Am Chem Soc 107, 2820–2821.

40 Bothner-By, A., Stephens, R.L., Lee, J.M., Warren, C.D & Jeanloz, R.W (1984) Structure determination of a tetrasaccharide: transient nuclear Overhauser effects in the rotating frame J Am Chem Soc 106, 811–813.

41 Bax, A & Davis, D.G (1985) Practical aspects of two-dimensional transverse NOE spectroscopy J Magn Reson 63, 207–213.

42 Marion, D., Ikura, M., Tschudin, R & Bax, A (1989) Rapid recording of 2D NMR spectra without phase cycling Application

to the study of hydrogen exchange in proteins J Magn Reson 85, 393–399.

43 Bodenhausen, G & Ruben, D.J (1980) Natural abundance nitrogen-15 NMR by enhanced heteronuclear spectroscopy Chem Phys Lett 69, 185–189.

44 Bachmann, P., Aue, W.P., Mu¨ller, L & Ernst, R.R (1977) Phase separation in two-dimensional spectroscopy J Magn Reson 28, 29–39.

45 Cavanagh, J & Rance, M (1990) Sensitivity enhancement in isotropic mixing (TOCSY) experiments J Magn Reson 88, 72– 85.

46 Palmer, A.G III, Cavanagh, J., Wright, P.E & Rance, M (1991) Sensivity improvement in proton-detected two-dimensional cor-relation NMR spectroscopy J Magn Reson 93, 151–170.

47 Wu¨thrich, K (1986) NMR of Proteins and Nucleic Acids Wiley Interscience, New-York.

48 Bru¨nger, A.T (1 996) X-PLOR, Version 3.851 Yale University Press, New Haven, CT.

49 Bernstein, F.C., Koetzle, T.F., Williams, G.J.B., Meyer, E.F., Brice, M.D., Rodgers, J.R., Kennard, T., Shimanouchi, O & Tamusi, M (1977) The Protein Data Bank: a computer-based archival file for macromolecular structures J Mol Biol 112, 535– 542.

50 Koradi, R., Billeter, M & Wu¨thrich, K (1 996) MOLMOL: a program for display and analysis of macromolecular structures.

J Mol Graphics 14, 51–55.

51 Nilges, M., Clore, G.M & Gronenborn, A.M (1988) Determi-nation of three-dimensional structures of proteins from inter-proton distance data by dynamical simulated annealing from a random array of atoms Circumventing problems associated with folding FEBS Lett 239, 129–136.

52 Sternhell, S (1969) Correlation of interproton spin-spin coupling constants with structure Quart Rev Chem Soc 23, 236–270.

53 Milhaud, J., Berrehar, J., Lancelin, J.-M., Michels, B., Raffard, G & Dufourc, E.J (1997) Association of polyene anti-biotics with sterol-free lipid membranes II Hydrophobic binding

Trang 9

of nystatin to dilauroylphosphatidylcholine bilayers Biochim.

Biophys Acta 1326, 54–66.

54 Milhaud, J., Ponsinet, V., Takashi, M & Michels, B (2002)

Interactions of the drug amphotericin B with phospholipid

membranes containing or not ergosterol: new insight into the role

of ergosterol Biochim Biophys Acta 1558, 95–108.

55 Mendes, M.V., Recio, E., Fouces, R., Luiten, R., Martin, J.F & Aparicio, J.F (2001) Engineered biosynthesis of novel polyenes: a pimaricin derivative produced by targeted gene disruption in Streptomyces natalensis Chem Biol 8, 635–644.

Ngày đăng: 21/02/2014, 03:20

TỪ KHÓA LIÊN QUAN

TÀI LIỆU CÙNG NGƯỜI DÙNG

TÀI LIỆU LIÊN QUAN

🧩 Sản phẩm bạn có thể quan tâm