amino acid residue in staphylococcal nuclease refolding Zhengding Su3, Jiun-Ming Wu1, Huey-Jen Fang1, Tian-Yow Tsong2,3and Hueih-Min Chen1 1 Institute of BioAgricultural Sciences, Academ
Trang 1amino acid residue in staphylococcal nuclease refolding Zhengding Su3, Jiun-Ming Wu1, Huey-Jen Fang1, Tian-Yow Tsong2,3and Hueih-Min Chen1
1 Institute of BioAgricultural Sciences, Academia Sinica, Taipei, Taiwan, ROC
2 Institute of Physics, Academia Sinica, Taipei, Taiwan, ROC
3 Department of Biochemistry, University of Minnesota College of Biological Sciences, St Paul, MN, USA
Staphylococcal nuclease (SNase) is a single-domain
protein of 149 amino acids Its 3D structure has been
examined by NMR [1–3] and X-ray crystallography
[4,5] However, only part of the structure (positions 1–
141) can be confirmed The segment 142–149 has not
been defined with certainty because of its apparent
flexibility Structural observations made with NMR or
X-ray have led to the prediction that certain amino
acid(s) in the flexible segment stabilize the rest of the
structure, in particular the key amino acid(s) located
close to this flexible segment The tryptophan at
posi-tion 140, for example, may play an important role in
maintaining the protein structure formed by amino
acids 1–141 In this study, we used site-directed
muta-genesis to generate point mutations and truncations
around this position to explore the above prediction
As shown by Chen and colleagues [6], SNase protein
can be unfolded by lowering its pH (for example, from
pH 7 to pH 2) About 2.5 protons are associated with
the key glutamic amino acid residues at positions 75 and
129 This association between protons and key amino
acids leads the protein to unfold However, the refolding process may be different and more complex because the transition of refolding is from many unfolded states to
a single native state Based on previous kinetic experi-ments using single-jump and double-jump stopped-flow for refolding [7,8], SNase protein can be refolded in vitro
to its active 3D conformation in milliseconds The sequence of equilibrium reactions between the three denatured states and one native state can be shown as [9] N« D1« D2« D3, where N is the protein in its native state and Di(i¼ 1–3) indicates the protein in its unfolded state This scheme has been used to solve puz-zles such as accumulated intermediates and to conduct random searches among ‘microscopic states’ [8] The early stages of refolding (Difi N) occur via key amino acid(s) which act as nucleation centres before proton dissociation Subsequently, these centres trigger the condensation of random polypeptide chains into the compact form of the native state
In this study, the effects of mutating W140 [10]
on SNase protein conformation and stability were
Keywords
aromatic amino acid; refolding; stability;
staphylococcal nuclease
Correspondence
H-M Chen, Institute of BioAgricultural
Sciences, Academia Sinica, Taipei,
Taiwan 115, R.O.C.
Fax: +886 2 2788 8401
Tel: +886 2 2785 5696 ext 8030
E-mail: robell@gate.sinica.edu.tw
(Received 3 May 2005, revised 3 June
2005, accepted 13 June 2005)
doi:10.1111/j.1742-4658.2005.04814.x
Staphylococcal nuclease (SNase) is a model protein that contains one domain and no disulfide bonds Its stability in the native state may be maintained mainly by key amino acids In this study, two point-mutated proteins each with a single base substitution [alanine for tryptophan (W140A) and alanine for lysine (K133A)] and two truncated fragment proteins {positions 1–139 [SNase(1–139) or W140O] and positions 1–141 [SNase(1–141) or E142O]} were generated Differential scanning micro-calorimetry in thermal denaturation experiments showed that K133A and E142O have nearly unchanged DHcal relative to the wild-type, whereas W140A and W140O display zero enthalpy change (DHcal 0) Far-UV CD measurements indicate secondary structure in W140A but not W140O, and near-UV CD measurements indicate no tertiary structure in either W140 mutant These observations indicate an unusually large contribution of W140 to the stability and structural integrity of SNase
Abbreviations
DSC, differential scanning calorimetry; SNase, staphylococcal nuclease.
Trang 2investigated Two point-mutated proteins, with a single
base substitution of alanine for tryptophan (W140A)
and alanine for lysine (K133A), and two truncated
fragment proteins, with fragments 1–139 [SNase(1–
139) or W140O] and 1–141 [SNase(1–141) or E142O],
were generated The effect of these C-terminal
trunca-tions and point mutatrunca-tions to C-terminal residues on
SNase stability and conformation integrity was
exam-ined by subjecting these mutants and wild-type
pro-teins to CD [11,12] and differential scanning
calorimetry (DSC) [13,14] The preliminary refolding
process in terms of assembly of fragments is discussed
Results
CD spectra
Secondary structure of SNase and its mutants was
deter-mined by CD with spectrapolorimetry measurements
The approximate fraction of secondary structure type
that is present in any protein can be determined by its
far-UV CD spectrum as the sum of fractional multiples
of the reference spectra for each structural type
Figure 1A shows the CD spectra of W140A, E142O
and K133A There are no significant differences from
that of the wild-type protein In contrast, W140O has a
completely different CD spectrum There are no peak
minima at 222 nm and 208 nm, but instead a peak
mini-mum at 200 nm, indicating that it has no secondary
structure only random coil We can therefore postulate
that, when the segment beyond W140 was removed, the
secondary structure of the protein disintegrated Using
the peak at 222 nm of the wild-type protein as an index
of helical conformational stability, this CD spectrum of
W140O suggests a decrease in helicity on removal of all
amino acids beyond position 140
In CD spectra in the near-UV region (Fig 1B), the
wild-type protein and mutants E142O and K133A show
strong intensity at 277 nm (h )77 degreesÆcm)2Æ
dmol)1), revealing an intact tertiary conformation In
contrast, W140A and W140O both lacked tertiary
struc-ture, as their intensities at 277 nm were only h )22
and )13 degreesÆcm)2Ædmol)1 (Fig 1B) However,
W140A at 295 nm had a similar spectrum to that of the
wild-type protein, but W140O did not (h 0) This may
indicate that the aromatic F or Y in the W140A mutant
are more ordered and compact than in the W140O
protein
Tryptophan fluorescence spectra
W140 is located near the flexible C-terminus of SNase
Changes in the fluorescence intensity of W140 reflect
a change in the hydrophobic environment surrounding W140 and thus indicate a change in the overall (ter-tiary) structure of the protein Figure 2 shows the fluorescence spectra of wild-type SNase and the four mutants E142O, K133A, W140A and W140O The fluorescence spectra of E142O and K133A are similar
to that of the wild-type protein However, the fluores-cence in the mutants without tryptophan at 140 (W140A and W140O) was much lower than both the wild-type protein and mutants E142O and K133A
Thermal analysis of protein unfolding The DSC curves of the wild-type protein and the mutants K133A, E142O, W140A and W140O are shown in Fig 3, with their thermodynamic parameters summarized in Table 1 The calorimetric DHcal values
Fig 1 CD spectra of wild- type and SNase mutants (A) CD spectra (far-UV) of five proteins [wild-type (WT), W140A, E140O, W140O and K133A] All spectra are similar except the W140O spectrum (bold line) (B) CD spectra (near-UV) of the same proteins Protein concentration was 0.5 mgÆmL)1.
Trang 3of the wild-type protein and K133A and E142O were
88.45, 84.70, and 83.60 kcalÆmol)1, respectively The
melting point and DSC profile of E142O (52.8C) was
almost identical with that of the wild-type protein (52.32C) K133A had a similar DHcal but a slightly different melting point (47.70C) compared with the wild-type protein These results suggest that lysine at position 133 and the residues that follow glutamic acid
at position 142 play negligible roles in maintaining the native structure of SNase
In contrast, W140A and W140O revealed no distinct maxima in their DSC profiles This is very different from the wild-type protein and K133A and E142O, which showed a significant enthalpy change This implies that either the protein has poor stability or no secondary⁄ tertiary structure results from either repla-cing the tryptophan at position 140 with alanine or the removal of a fragment from positions 140–149 This
is supported by the melting points of the proteins (52.32C for the wild-type and ‘not detectable’ for W140A and W140O) Flanagan et al [15] reported that multiple mutations can cause large changes in the average conformation of denatured proteins Here we show that a specific single mutation or removal of a specific fragment can cause large changes in the native state of SNase
Discussion
In addition to its local electrostatic interactions, which contribute largely to SNase stability via specific charged amino acids (Results shown in the preceding paper), other nonelectrostatic interactions at even more specific positions play a significant role in maintaining SNase tertiary structure
Our CD and DSC data show that the W140 in SNase is the amino acid responsible for the stability of the whole protein However, in comparison with the wild-type protein, the mutant W140A retains signifi-cant secondary structure (Fig 1A) Yin & Jing [16] reported that W140 plays an important role in the native-like SNase conformation and the enrichment
of an ordered secondary structure If tryptophan is relocated from position 140 to 34, the mutant (F34W⁄ W140F) [17] retains its secondary structure, but its tertiary structure is lost This implies that tryp-tophan plays a significant role in maintaining the 3D structure only at 140 (wild-type SNase has only one W) Without W140, the secondary structure may be maintained by other interactions such as local stable segments interacting around E75 and E129, areas with oppositely charged amino acids The truncated protein W140O in this study (deletion of residues 1–140) shows zero enthalpy on thermal unfolding (Table 1) and has
no secondary structure (Fig 1A) This indicates that, without tryptophan and residues 140–149, the protein
Fig 2 Steady-state fluorescent spectra of wild-type and mutant
SNase Spectra of five proteins [wild-type (WT), W140A, E140O,
W140O and K133A] Protein concentration was 0.4 mgÆmL)1.
Fig 3 Calometric melting curves of wild-type and mutants of
SNase DSC curves of five proteins [wild-type (WT), W140A,
E140O, W140O and K133A] The curves of W140A and W140O
are nearly linear in terms of intensity All protein concentrations
were 2 mgÆmL)1.
Trang 4cannot maintain its tertiary conformation or even the
secondary motif However, if residues 142–149 are
removed, the protein largely retains its 3D structure
(Table 1 and Fig 2) Related experiments have been
performed previously Parker et al [18] showed that
the apparent association constant of SNase(1–126)
bound to pdTp in the presence of Ca2+ is
approxi-mately threefold lower than that of the wild-type
pro-tein Therefore, some or all of the residues in the 127–
149 segment are critical for maintenance of the native
conformation of the protein In addition, Griko and
coworkers [19], studying SNase(1–136), showed that
this fragment (residues 1–136) has no secondary
struc-ture but retains the tertiary conformation They thus
proved that SNase(1–136) is not a ‘molten globule’
protein, although its unfolding process was a
first-order phase transition This situation contrasts with
our W140O [SNase(1–139)] mutant, which maintains
its secondary structure to a certain extent but has no
tertirary conformation (Fig 1A)
As to the point of fragment assembly during protein
folding, Anfinsen and coworkers [20,21] originally
studied the enzymic effect using overlapping
structure-less fragments [for instance, SNase(99–149) interacting
with SNase(1–126)] and found that the reconstructed
complex was active and exhibited much of the ordered
structure Anfinsen consequently predicted that this
protein was organized from its polypeptide chain into
N-terminal and C-terminal centers during refolding
[21] Since then, many scientists have been interested in
demonstrating this concept by using N-terminal and
C-terminal fragments of SNase as models for the study
of folding and unfolding pathways For example, Choy
& Kay [22] using NMR 15N and 2H spin relaxation
techniques illustrated that the fragment D131D
(dele-tion of wild-type residues 3–12 and 141–149) of SNase
was completely unfolded under nondenaturing
condi-tions (pH 5 and low salt concentration) This is
because they observed much more vibrational motion
in the unfolded protein than in folded ones on the
picosecond time scale Taniuchi et al [23] used both
SNase(1–126) and SNase(50–149) as typical fragments
to form type I and type II (in equilibrium) complex proteins They reported that these two overlapping fragments could form enzymically active complement-ary structures, and their folding rates were not related
to any decrease in energy from the unfolded to the folded state Feng et al [24] created the SNase frag-ments SNase(1–110), SNase(1–121) and SNase(1–135) and used them in NMR spectroscopy experiments to study the folding process They concluded that the conformation of these fragments could be considered
as native-like partially folded and unfolded states Recently, they further used the short N-terminal frag-ments SNase(1–20), SNase(1–28) and SNase(1–36) to show that the folding nucleation sites of SNase may start from the N-terminus [25] However, we used the C-terminal fragments SNase(1–140) and SNase(1–142)
to show that SNase(1–140) plays a role in the assembly
of the protein during refolding Our results also show that SNase(1–140), without Trp at position 140, does not have any structure, whereas the fragment including Trp at position 140, i.e SNase(1–142), has a similar structure to the wild-type enzyme
Our experiments show that tryptophan at position
140 plays an important role in maintaining protein ter-tiary integrity Figure 4A shows how tryptophan (loop 1) may interact with loop 2 and loop 3 These inter-actions seem to form a ‘lower neck’ in the protein as compared with the ‘upper neck’ which is formed by E75 with H121 and K915 The forces responsible for the interactions between these loops are not yet clear One possibility is that the loops together with W140 constitute a nucleation center The indole ring [26]
of W140 may be the main target for the interaction with both loop 2 and loop 3 Furthermore, from the protein folding scheme discussed previously [9],
N« D1« D2« D3, the energy needed for transfor-mation among the Di states of protein unfolding⁄ refolding is negligible (4.57 kcalÆmol)1 for D1 « D2 and 4.32 kcalÆmol)1 for D2« D3) and a possible intermediate state such as SNase(1–139) exists
Table 1 DSC results of SNase and its mutants Phosphate buffer (25 m M Na2HPO4⁄ 50 m M NaH2PO4⁄ 200 m M NaCl, pH adjusted to 7.0) was used in the experiments All proteins were used at a concentration of 2 mgÆmL)1 Difference from DH of WT (%) calculated by [(DH mutant ) DH WT ) ⁄ DH WT ] · 100 Difference from DC p of WT (%) calculated by [(DC p mutant ) DC p WT ) ⁄ DC p WT ] · 100 WT, Wild-type; ND, not detectable.
Average Tm(C) DH (kcalÆmol)1)
Difference of
DH from WT (%)
DC p
(kcalÆmol)1ÆK)1)
DDC p
(kcalÆmol)1ÆK)1)
Difference of
DC p from WT (%)
Trang 5(Fig 4B, State 2) When tryptophan occupies position
140, the whole protein is folded into its native
confor-mation (Fig 4B, State 3)
Summary
Trp140 located in the C-terminal loop of SNase plays
an important role in protein stability and
conforma-tional integrity During protein unfolding⁄ refolding,
the addition of 2.5 protons (both E75 and E129 are
the targets of protonation) results in SNase unfolding,
with refolding at an early stage through the formation
of a SNase(1–139) fragment in which the tryptophan
at position 140 is needed for formation of the native structure
Experimental procedures
Materials
Luria–Bertani broth and isopropyl thio-b-d-galactoside were purchased from USB (Cleveland, OH) Salmon testes DNA and some analytical grade chemicals such as EDTA, Tris⁄ HCl, CaCl2, NaCl and mineral oil were obtained from Sigma (St Louis, MO, USA) Salmon testes DNA for the enzyme activity test was used without further purification Guanidine hydrochloride and dNTPs were purchased from Boehringer (Mannheim, Germany) Ethanol (> 99%) was obtained from Panreac (Barcelona, Spain) Urea was a product of Acros (Pittsburgh, PA, USA) The Quick-changeTM kit containing Pfu DNA polymerase, 10· reac-tion buffer and DpnI restricreac-tion enzyme was purchased from Stratagene (La Jolla, CA, USA) Water used for these experiments was deionized and distilled
PCR site-directed mutagenesis
The wild-type SNase nuc gene (originally obtained from
D Shortle, the Johns Hopkins University, Baltimore, MD, USA) was cloned into pTrc-99A, which was used to trans-form Escherichia coli strain JM105 Plasmid DNA was purified by the alkaline lysis method (Gibco-BRL, Gaithers-burg, MD, USA; GFXTMkit), and stored at)20 C before being subjected to mutagenesis Two complementary 33-mer primers that included the alanine codon at positions 140 or
133 were designed and synthesized (Life Technologies, Rockville, MD, USA) Single-point mutations were made
by site-directed mutagenesis to generate W140A and K133A Truncated proteins W140O (the segment between positions 140 and 149 of the wild-type protein was removed) and E142O (the segment between positions 142 and 149 of the wild-type protein was removed) were generated by using suitable complementary primers For site-directed mutagen-esis, a 10· reaction buffer (Stratagene; QuickChangeTMkit) was mixed with 1.5 lL dsDNA template, 1.2 lL of a pair of complementary oligonucleotides, 1 lL 10 mm each dNTP and double-distilled water to a final volume of 50 lL Then
1 lL Pfu DNA polymerase was added to the solution, and the mixture was overlaid with 30 lL mineral oil A PCR consisting of 16 cycles of 50C (1.5 min), 68 C (14 min), and 94C (1 min) was performed using a PerkinElmer 480 thermal cycler (Wellesley, MA, USA) The wild-type DNA template was then digested by adding 1 lL DpnI restriction enzyme to the PCR mixture and incubating at 37C for
1 h Then 10 lL of the reaction mixture (containing undi-gested mutant plasmid) was used to transform 100 lL
B
A
Fig 4 Global segment interactions and the folding profiles in
wild-type SNase (A) W140, in loop 1 interacts with loop 2 and loop 3
which forms a ‘lower neck’ network area in maintaining protein
ter-tiary structure State 1 denotes the nascent polypeptide fragment.
(B) The fragment folding pathway induced via the SNase(1–139)
fragment and formed to its minimum energy native state via the
addition of either tryptophan at position 140 or fragment 140–149.
Trang 6competent JM105 cells The mixture was incubated on ice
for 1 h, and at 42C for 2 min, followed by 2 min
incuba-tion on ice After transformaincuba-tion, 800 lL Luria–Bertani
medium was added, and the mixture incubated at 37C for
1 h Transformed cells were selected on ampicillin plates,
and mutant DNA was isolated from the resulting colonies
Mutant plasmids were then identified by BamHI and NcoI
restriction digestion, and their sequences confirmed by
DNA sequencing
DNA sequencing
Plasmid DNA was isolated with the GFXTM Micro
Plas-mid Prep Kit (Amersham Pharmacia Biotech, Piscataway,
NJ, USA), and the resulting dsDNA was mixed with 8 lL
BigDyeTMmaster mix (BigDyeTMTerminator Ready
Reac-tion Kit; Applied Biosystems, Foster City, CA, USA) and
3.2 pmol sequencing primer The final solution was mixed
with deionized water to a final volume of 20 lL in a
0.5-mL thin-walled PCR tube and overlaid with 40 lL light
mineral oil DNA sequencing was performed by cycle
sequencing using 25 cycles of 96C for 30 s, 50 C for
15 s, and 60C for 4 min in a PerkinElmer 480 thermal
cycler The extension products were purified by a
Centri-SepTM spin column chromatography (Princeton
Separa-tions, Adelphia, NJ, USA) to remove unincorporated dye
terminators Template suppression reagent (5 lL; PE
Applied Biosystems, Foster City, CA, USA) was mixed
with purified extension products The samples were heated
at 95C for 2 min and then chilled on ice Capillary
elec-trophoresis was performed using an ABI PRISM 310
Gen-etic Analyzer (PE Applied Biosystems) fitted with a 47-cm
capillary containing POP-6 polymer The mutant sequences
(positions 1–149 for mutant proteins or 1–139 and 1–141
for truncated proteins) were compared with that of the
wild-type and confirmed to have the correct mutant
sequences
Protein purification
Escherichia coliJM105 carrying recombinant plasmids were
grown in Luria–Bertani broth containing 100 lgÆmL)1
ampicillin at 37C Protein expression was induced by
adding isopropyl thio-b-d-galactoside The cells were
har-vested after 4 h of incubation and suspended in chilled
buffer A (6 m urea, 0.05 m Tris, 0.2 m NaCl, pH 9.2,
fil-tered through a 0.45 lm membrane) Proteins were
collec-ted after two alcohol precipitations and stored in buffer B
(6 m urea, 0.05 m Tris, pH 9.2, filtered through a 0.45 lm
membrane) The recombinant proteins were purified by
cation-exchange chromatography (washed CM-25
ion-exchange gel column) The proteins were dialysed after
purification for 2 days at 4C against phosphate buffer
(25 mm NaH2PO4⁄ 50 mm NaHPO4⁄ 200 mm NaCl, pH
adjusted to 7.0) and were then lyophilized The average
yield of recombinant proteins was 25 mgÆL)1 SNase purity was investigated by SDS⁄ PAGE The gel was stained with Coomassie blue and analyzed by densitome-try, revealing protein purity of greater than 85% Protein concentration was determined by measuring the absorption coefficient of each mutant by the method of Gill & von Hippel [27]
CD measurements
CD was performed on wild-type protein and mutants using a Jasco model J-720 spectropolarimeter The spectra were measured between 200 and 320 nm Wild-type and mutant proteins were dissolved in phosphate buffer (25 mm NaH2PO4⁄ 50 mm NaHPO4⁄ 200 mm NaCl, pH adjusted to 7.0) at a concentration of 0.5 mgÆmL)1 Spec-tra were obtained as the average of five successive scans with a bandwidth of 1.0 nm and a scan speed of
20 nmÆmin)1
Steady-state tryptophan fluorescence measurements
Measurements were made with a LS-50B spectrometer (PerkinElmer) Samples were dissolved in phosphate buffer
at a concentration of 0.4 mgÆmL)1 Excitation was set at
298 nm, and emissions were observed at 350 nm The fluor-escence spectra were measured between 300 and 550 nm with a scanning speed of 150 nmÆs)1 and an excitation slit
of 5.0 nm
Calorimetric measurements
Thermal analysis of protein denaturation was performed with DSC (a model 6100 Nano II; Calorimetry Sciences Corp., Provo, UT, USA) Lyophilized wild-type and mutant SNase were dissolved in phosphate buffer at a concentration of 2 mgÆmL)1 Samples were first sonicated for 15 min Then 1 mL buffer or sample was loaded into
a clean reference or sample cell, respectively, ensuring that the samples were free of air bubbles Samples were heated from 20C to 75 C under 3 atm at a heating rate of
1CÆmin)1 The melting point (Tm) of protein tested was directly obtained from the DSC curve The enthalpy change (DHcal) of each protein was calculated by integra-tion of the curve covering area (Tm was taken as the curve peak point) using origin software
Acknowledgements
This work is partially supported by a grant (NSC-92-2311-B-001) from the National Science Council, Taiwan, R.O.C and the theme project of Academia Sinica, Taipei, Taiwan, R.O.C
Trang 71 Fox RO, Evans PA & Dobson CA (1986) Multiple
con-formations of a protein demonstrated by magnetization
transfer NMR spectroscopy Nature 320, 192–194
2 Evans PA, Dobson CM, Kautz RA, Hatfull G & Fox RO
(1987) Proline isomerism in staphylococcal nuclease
char-acterized by NMR and site-directed mutagenesis Nature
329, 266–268
3 Alexandrescu TA, Hinck AP & Markley JL (1990)
Coupling between local structure and global stability of
a protein: mutants of staphylococcal nulcease
Biochem-istry 29, 4516–4525
4 Cotton FA, Hazen EE & Legg MJ (1979)
Staphylococ-cal nuclease: proposed mechanism of action based on
structure of enzyme-thymidine
3¢,5¢-bisphosphate–cal-cium ion complex at 1.5-A˚ resolution Proc Nat Acad
Sci USA 76, 2551–2562
5 Chen J, Lu Z, Sakon J & Stites WE (2000) Increasing
the thermostability of staphylococcal nuclease:
implica-tions for the origin of protein thermostability J Mol
Biol 303, 125–130
6 Chen HM, Chan SC, Leung KW, Wu JM, Fang HJ &
Tsong TY (2005) Local stability identification and the
role of key acidic amino acid residues in staphylococcal
nuclease unfolding FEBS Journal 272, 3967–3974
7 Chen HM, Markin VS & Tsong TY (1992) pH induced
folding⁄ unfolding of staphylococcal nuclease:
determin-ation of kinetic parameters by the sequential jump
method Biochemistry 31, 1483–1491
8 Chen HM, Markin VS & Tsong TY (1992) Kinetic
evi-dence of microscopic states in protein folding
Biochem-istry 31, 12369–12375
9 Su ZD, Arooz TM, Chen HM, Gross CJ & Tsong TY
(1996) Least activation path for protein folding:
inves-tigation of staphylococcal nuclease folding by
stopped-flow CD Proc Natl Acad Sci USA 93, 2539–2544
10 Eftink M & Wasylewski Z (1992) Time-resolved
fluor-escence studies of the thermal and guanidine induced
unfolding of nuclease A and its unstable mutant
Time-Resolved Laser Spectroscopy Biochemistry III
1640, 579–584
11 Rodger A & Norde´n B (1997) Circular Dichroism and
Linear Dichoism Oxford University Press Inc., New
York
12 Nakanishi K, Berova N & Woody RH (1994) Circular
Dichroism Principles and Applications VCH Publishers,
Weinheim
13 Carra JH, Anderson EA & Privalov PL (1994)
Three-state thermodynamic analysis of the denaturation of
sta-phylococcal nuclease mutants Biochemistry 33, 10842–
10850
14 Vincent JH & Freire E (1997) Predicting the equilibrium
protein folding pathway: structure-based analysis of
staphylococcal nuclease Proteins: Structure, Function and Genetics 27, 171–183
15 Flanagan JM, Kataoka M, Fujisawa T & Engelman
DM (1993) Mutations can cause large changes in the conformation of a denatured protein Biochemistry 32, 10359–10370
16 Yin J & Jing G (2000) Tryptophan 140 is important, but serine 141 is essential for the formation of the inte-grated conformation of staphylococcal nuclease J Bio-chem (Tokyo) 128, 113–119
17 Li Y & Jing G (2000) Double point mutant F34WW140F
of staphylococcal nuclease is in the molten globule state but highly competent to fold into a functional conforma-tion J Biochem (Tokyo) 128, 739–744
18 Parker DS, Davis A & Taniuchi H (1981) Further study of the conformation of nuclease-(1–126) in relation to intrinsic enzymatic activity J Biol Chem
256, 4557–4569
19 Griko YV, Gittis A, Lattman EE & Privalov PL (1994) Residual structure in a staphylococcal nuclease frag-ment: is it a molten globule and is its unfolding a first-order phase transition? J Mol Biol 243, 93–99
20 Anfinsen CB (1972) Formation and stabilization of pro-tein structure Biochem J 128, 737–749
21 Parikh I, Corley L & Anfinsen CB (1971) Semisynthetic analogues of an enzymically active complex formed between two overlapping fragments of staphylococcal nuclease J Biol Chem 246, 7392–7397
22 Choy W-Y & Kay LE (2003) Probing residual interac-tions in unfolded protein states using NMR spin relaxa-tion techniques: an applicarelaxa-tion toD131D J Am Chem Soc 125, 11988–11992
23 Taniuchi H, Parker DS & Bohnert JL (1977) Study of equilibration of the system involving two alternative, enzymically active complementing structures simulta-neously formed from two overlapping fragments of sta-phylococcal nuclease J Biol Chem 252, 125–140
24 Feng Y, Liu D & Wang J (2003) Native-like partially folded conformations and folding process revealed in the N-terminal large fragments of staphylococcal nucle-ase: a study by NMR spectroscopy J Mol Bol 330, 821–837
25 Dai J, Wang X, Feng Y, Fan G & Wang J (2004) Searching for folding initiation sites of staphylococcal nuclease: a study of N-terminal short fragments Bio-polymers 75, 229–241
26 Hirano S, Kamikubo H, Yamazaki Y & Kataoka M (2005) Elucidation of information encoded in trypto-phan 140 of staphylococcal nuclease Proteins: Struc-ture, Function and Bioinformatics 56, 271–277
27 Gill SC & von Hippel H (1989) Calculation of protein extinction coefficients from amino acid sequence data Anal Biochem 181, 319–326