The present mini-review summarizes the results of recent studies regarding the diverse CA–CA interactions and inter-faces involved either in the assembly of the immature HIV-1 capsid, or
Trang 1The capsid protein of human immunodeficiency
virus: intersubunit interactions during virus assembly
Mauricio G Mateu
Centro de Biologı´a Molecular ‘Severo Ochoa’ (CSIC-UAM), Universidad Auto´noma de Madrid, Spain
Introduction
During HIV-1 morphogenesis [1,2], the capsid protein
(CA; or p24) participates in two distinct assembly
events The first occurs inside the cell and involves the
Gag polyprotein, of which CA constitutes a part A
spherical capsid comprising up to 5000 Gag subunits is
formed through self-association around a dimer of the
viral RNA genome, which is encapsidated along with
several viral and cellular proteins Assembly-competent
Gag molecules are bound to the plasma membrane and may directly interact with molecules of the viral envelope polyprotein, which are embedded in the membrane Thus, condensation of the capsid drives its coating by an envelope polyprotein-containing lipid bilayer As a result of this morphogenetic process, an immature, non-infectious HIV-1 particle buds from the infected cell
Keywords
capsid; conformational stability and
dynamics; human immunodeficiency virus;
molecular recognition; protein association;
protein conformation; protein structure–
function relationships; virus assembly
Correspondence
M G Mateu, Centro de Biologı´a Molecular
‘Severo Ochoa’, Universidad Auto´noma de
Madrid, Cantoblanco, 28049 Madrid, Spain
Fax: +34 91 1964420
Tel: +34 91 1964575
E-mail: mgarcia@cbm.uam.es
Website: http://www.cbm.uam.es/
mkfactory.esdomain/webs/CBMSO/
plt_LineasInvestigacion.aspx?
IdObjeto=19&ChangeLanguage=2
(Received 23 February 2009, revised 12
August 2009, accepted 20 August 2009)
doi:10.1111/j.1742-4658.2009.07313.x
The capsid protein (CA) of HIV-1 is composed of two domains, the N-ter-minal domain (NTD) and the C-terN-ter-minal domain (CTD) During the assembly of the immature HIV-1 particle, both CA domains constitute a part of the Gag polyprotein, which forms a spherical capsid comprising up
to 5000 radially arranged, extended subunits Gag–Gag interactions in the immature capsid are mediated in large part by interactions between CA domains, which are involved in the formation of a lattice of connected Gag hexamers After Gag proteolysis during virus maturation, the CA protein
is released, and approximately 1000–1500 free CA subunits self-assemble into a truncated cone-shaped capsid In the mature capsid, NTD–NTD and NTD–CTD interfaces are involved in the formation of CA hexamers, and CTD–CTD interfaces connect neighboring hexamers through homodi-merization The CA–CA interfaces involved in the assembly of the imma-ture capsid and those forming the maimma-ture capsid are different, at least in part CA appears to have evolved an extraordinary conformational plastic-ity, which allows the creation of multiple CA–CA interfaces and the occur-rence of CA conformational switches This minireview focuses on recent structure–function studies of the diverse CA–CA interactions and interfaces involved in HIV-1 assembly Those studies are leading to a better under-standing of molecular recognition events during virus morphogenesis, and are also relevant for the development of anti-HIV drugs that are able to interfere with capsid assembly or disassembly
Abbreviations
CA, capsid protein of HIV-1; cryoEM, cryoelectron microscopy; cryoET, cryoelectron tomography; CTD, C-terminal domain of CA; EM, electron microscopy; H–D, hydrogen–deuterium; MA, matrix protein; MHR, major homology region; MLV, murine leukemia virus; NC, nucleocapsid protein; NTD, N-terminal domain of CA; RSV, Rous sarcoma virus.
Trang 2The second capsid assembly event occurs upon
bud-ding of the immature virion The viral
protease-medi-ated processing of Gag into several independent
proteins and peptides leads to the disassembly of the
spherical capsid inside the virion Some of the folded
domains of Gag are then able to reassemble as
inde-pendent proteins The matrix protein (MA; the Gag
N-terminal domain), remains associated with the viral
membrane, forming a discontinuous inner layer The
nucleocapsid protein (NC) remains associated with the
viral RNA to form the nucleocapsid In addition, some
1000–1500 subunits out of a larger number of CA
mol-ecules, released as a two-domain protein, self-assemble
into a truncated cone-shaped, hollow structure, namely
the mature HIV-1 capsid The mature capsid and the
nucleocapsid that it contains constitute the viral core
As a result of this dramatic structural rearrangement,
the immature virion turns into a mature, infectious
virion
During the viral cycle, CA is present in different
structural environments: as a part of Gag, as an
unassembled protein, and as an independent protein
forming the mature capsid Remarkably, the CA
poly-peptide appears to have evolved an extraordinary
con-formational plasticity, which allows the creation of
diverse CA–CA interfaces and other CA–ligand
inter-faces during HIV-1 morphogenesis The present
mini-review summarizes the results of recent studies
regarding the diverse CA–CA interactions and
inter-faces involved either in the assembly of the immature
HIV-1 capsid, or in the reassembly of CA into a
mature capsid The detailed description of the structure
and conformational dynamics of these interfaces,
together with a quantitative dissection of their
energet-ics, is providing deeper insights on the molecular
recog-nition events responsible for the assembly and stability
of the retrovirus capsid, and of viral capsids in general
Moreover, the successful rational or semi-rational
design of anti-HIV drugs that are able to impair capsid
assembly or disassembly [3] may critically depend on
the availability of a sufficiently detailed structural and
energetic definition of those interfaces
Identification of CA–CA interfaces in
the immature HIV-1 capsid
Although the full-length Gag protein can be isolated in
soluble form as a homodimer or homotrimer, its
atomic structure has not been determined However,
the atomic structures of the separate Gag domains
from HIV-1 (and other retroviruses) have been solved
by X-ray crystallography and⁄ or NMR spectroscopy
The N-terminal domain of CA (NTD) and the
C-ter-minal domain of CA (CTD) are small, globular and mainly helical NTD contains a-helices 1–7 of CA, and
is connected by a flexible linker to CTD, which contains a small 310-helix, an extended strand and a-helices 8–11 of CA (corresponding to helices 1–4 of CTD) [4–7]
Structural, biochemical and mutational analyses of the immature HIV-1 capsid have been carried out on immature virions, or on capsid-like particles that can
be assembled in vitro from full-length or truncated Gag molecules in the presence of nucleic acid and⁄ or other components [8–16] Electron microscopy (EM) of negatively stained immature capsid-like particles [8], as well as cryoelectron microscopy (cryoEM) [14,15] and cryoelectron tomography (cryoET) [17,18] of immature capsid-like particles or virions, has revealed a layered organization, which can be interpreted based on bio-chemical evidence and the superposition on the elec-tron density maps of the atomic structure of each domain The Gag subunits are radially extended, with the N-terminal domain, MA, associated with the inner layer of the viral membrane, and the remaining domains forming the innermost protein layers accor-ding to their positions in Gag: MA, CA-NTD, CA-CTD, the spacer peptide SP1, NC, the spacer peptide SP2 and the C-terminal peptide p6, with the
NC domain associated with the viral RNA
CryoEM imaging of immature HIV-1 capsids [14,15] has shown that Gag is organized as a lattice of hexa-mers Pseudoatomic models obtained by fitting the atomic structures of both CA domains in cryoET maps
of immature HIV-1 virions [17,18] indicate that poly-merization of Gag occurs mainly through the forma-tion of an intermediate layer of cup-shaped structures, each made of one hollow hexameric ring of CA domains placed immediately above a stem formed by six SP1 segments (Fig 1)
Mutational analyses are consistent with this view Several Gag domains and spacer peptides were shown
to be involved in the assembly and stability of the immature HIV-1 capsid, but CA plays a major role [19–24] However, the specific CA–CA interfaces involved in Gag hexamerization and the joining of neighboring hexamers in the immature HIV-1 capsid lattice are still unclear NTD has been shown to be non-essential for the assembly of the immature capsid [19] On the other hand, in a comprehensive muta-tional analysis [23], it was found that mutations that impaired immature capsid assembly are located both
in NTD (helices 4–6) and in CTD (the loop between helices 7 and 8 and helix 9)
Helix 9 forms a major part of the dimerization inter-face in CA and in the free CTD [6,7] Mutational
Trang 3analyses [23] indicate that this interface could be
involved in the structural organization of the immature
capsid However, a mutant CTD with a single amino
acid deletion has been recently crystallized as a
domain-swapped dimer [25] The domain-swapped
interface did not involve helix 9, but instead the major
homology region (MHR), a highly conserved,
20-amino acid stretch folded as a strand-turn-helix-8
motif Because of this unusual conservation, numerous
mutational analyses have focused on this stretch, and
have revealed that the MHR is important for many
different steps in the HIV-1 life cycle, including the
assembly of both the mature capsid, where it forms
part of the NTD–CTD interface (see below), and of
the immature capsid [20,23] Because the MHR also
forms a major part of the domain-swapped
dimeriza-tion interface in the mutant CTD structure, it has been
proposed that this interface could participate in the
assembly of the immature HIV-1 capsid [25] The
structural and functional studies performed to date
may be not discriminating enough to clearly favor the
involvement of either the domain-swapped or the
non-swapped CTD dimerization interfaces (or both) in the
assembly and stability of the immature HIV-1 capsid
In summary, in a model [17] of the immature HIV-1
capsid that may be consistent with the experimental
results achieved to date: (a) the capsid lattice is formed
by Gag hexamers that are stabilized mainly by a
six-helix bundle of SP1 peptides; (b) the hexamers are
joined through CTD homodimerization (with the
inter-face involving either helix 9 or the MHR); and (c)
NTD residues participate to some extent in
intra-hexamer and⁄ or inter-hexamer interactions (Fig 1)
This model remains to be validated and extended to higher resolution, and it may be far from complete In addition to CA, other Gag domains and other proteins are known or suspected to play important roles in the assembly and stabilization of the immature HIV-1 cap-sid Furthermore, a defect-free, continuous lattice of hexamers could not form spherical particles In an early EM study of immature capsid-like particles of HIV-1, a fullerene-like icosahedral shell was proposed [8], although later studies showed no evidence of icosa-hedral symmetry [14] Closing the immature capsid through 12 pentameric CA rings (that can be consid-ered as lattice ‘defects’) cannot be excluded, but sub-stantial regions lacking ordered Gag were visible in detailed electron cryotomographs, suggesting that the immature HIV-1 capsid may be not fully closed [17] Very recent studies by cryoET suggest that released immature virions include an incomplete but continuous Gag layer covering approximately two-thirds of the virion membrane [18,26] Curvature in the hexameric lattice is mediated by incorporation of defects of dif-ferent geometries into the lattice, with no evidence of a preference for pentameric defects [18] It was also sug-gested that late-budding structures with complete Gag capsids may not be normal precursors of extracellular HIV-1 virions [26]
Identification of CA–CA interfaces in the mature HIV-1 capsid
CA multimers with the same structural organization as authentic mature capsids have been obtained by self-assembly of CA in vitro, even in the absence of any other biomolecule, and subjected to structural, bio-chemical and mutational analyses [27–37] CryoEM studies of mature HIV-1 capsid-like particles assembled
in vitrorevealed that these are composed of an array of
CA hexamers Fitting the atomic structures of NTD and CTD on the cryoEM density map indicated that NTD connects the CA subunits in each hexamer, and CTD connects each hexameric ring to six neighbors through homodimerization [30] (Fig 1) Similar arrays
of CA hexamers were observed in cryoEM images of authentic cores isolated from HIV-1 virions [38] Recently, a CA mutant was used to obtain large, spherical capsid-like particles that collapsed when deposited on EM grids The flattened particles behaved
as 2D CA crystals, and could be used to obtain a detailed 3D map by electron cryocrystallography [39] (Fig 2A) Fitting the atomic structures of NTD and CTD in this map confirmed and substantially refined the mature HIV-1 capsid lattice model Three different protein–protein interfaces were observed in the CA
Immature Mature
Top
Side
Fig 1 Proposed models for the organization of the hexameric
lat-tices in immature and mature HIV-1 capsids [17] NTD, CTD and
SP1 domains of Gag are respectively colored cyan, yellow and
magenta Scale bar = 8 nm Figure reproduced with permission
[17].
Trang 4lattice: the interface between NTD domains in each
hexamer, the dimerization interface between CTD
domains belonging to neighboring hexamers, and
another interface between CTD and NTD domains
belonging to neighboring subunits of the same
hex-amer [39] (Fig 2B–D) This structural model and the
CA–CA interfaces involved are supported by
muta-tional analyses and biochemical evidence [23,32–34,36]
(Fig 2E, F)
In vitro polymerization of CA normally leads to
open cylindrical structures, although closed,
cone-shaped particles resembling authentic mature capsids
can be also obtained Despite the difference in shape,
the cylindrical capsid-like particles are organized with
the same hexameric lattice as the cone-shaped,
authen-tic mature capsids [30,38,39] A molecular model for the architecture of the mature HIV-1 capsid has been proposed that follows the principle of a fullerene cone: the body is composed of curved arrays of CA hexa-mers, and the ends are closed by inclusion at defined positions of 12 CA pentamers (acting as lattice
‘defects’) [29,30]
Very recently, cryoEM analyses of two in vitro assembled capsids of another retrovirus, Rous sarcoma virus (RSV), were described [40] Both capsids are icos-ahedrally symmetric: one is composed of 12 CA penta-mers, and the other of 12 pentamers and 20 hexamers Pseudoatomic models using the atomic structures of both CA domains revealed three distinct CA interfaces similar to those observed within and between hexamers
A
Fig 2 Structure of CA and the CA hexamer
in the mature HIV-1 capsid [39] (A) Electron
density map obtained by electron
cryocrys-tallography of the mature HIV-1 capsid
lat-tice; (B, C) Pseudoatomic models of the
CA monomer and hexamer, obtained by
fitting the atomic structures of NTD (green)
and CTD (blue) on the cryocrystallography
electron density map (C) Showing a top
view of the hexamer, with one monomer
outlined white (D) View of the hexamer as
in (C), but each CA monomer is depicted in
a different color; (E, F) Mapping on a CA
hexamer (top view and slabbed side view)
of mutations to alanine, according to their
effect on the assembly of mature HIV-1
capsid-like particles: (i) green or blue dots,
mutations in NTD or CTD, respectively, that
did not impair assembly; (ii) orange, yellow
or red dots, mutations that impaired
assembly and are respectively located in
the NTD–NTD, CTD–CTD or NTD–CTD
interfaces Figure reproduced with
permission [39].
Trang 5in the model of the HIV mature capsid This study
provides support for the fullerene model, and shows
how pentamers can be accommodated in the retroviral
capsid
Structural and energetic
characterization of CA–CA interfaces
in the mature HIV-1 capsid
From the results reviewed above, it could be concluded
that the picture of CA–CA and other protein–protein
interfaces in the immature HIV-1 capsid remains
blurred because of uncertainties on the structural
ele-ments involved, and the possibility of transient
interac-tions By contrast, three different CA–CA interfaces
have been clearly identified in the mature HIV-1
cap-sid, and mapped with relative accuracy Some of the
knowledge acquired to date on the detailed structure
and energetics of intersubunit interfaces involved in
the quaternary structure of the mature HIV-1 capsid is
reviewed below
The CTD–CTD dimerization interface
A high-resolution structural description of the CTD–
CTD interface that connects neighboring hexamers in
the mature HIV-1 capsid has been obtained by X-ray
crystallography of dimeric CTD [6,7] This interface is
essentially formed by the parallel packing of helix 9
from each monomer, but also involves interactions
between residues in the 310-helix of one monomer and
residues in helices 9 and 10 of the other monomer No
MHR residues are involved The structural description
of the dimerization interface in the isolated CTD dimer
is fully consistent with descriptions of the CTD–CTD
interface in the mature HIV-1 capsid These latter
descriptions derive from: (a) pseudoatomic models of
capsid-like particles [30,39]; (b) analyses of the effect
of CA mutations on the assembly of mature
capsid-like particles (Fig 2E,F) and⁄ or the formation of viral
cores; the results obtained showed that residues located
in helix 9 (among others), impaired mature capsid
assembly both in vivo and in vitro [23,34]; and (c)
hydrogen–deuterium (H–D) exchange experiments
analysed by MS The residues buried in the
intersub-unit interfaces could be identified by their slower H–D
exchange in the assembled particle, relative to the free
CA protein Again, residues in helix 9 (and others)
were involved in intersubunit interactions [33]
In the atomic structure of CTD, the dimerization
interface involves some 22 amino acid residues from
each monomer, and it would bury approximately
1800 A˚2of solvent-accessible area if no induced fit had
occurred; approximately two-thirds of this area is con-tributed by nonpolar side chains [6,7] The isolated CTD domain dimerizes with essentially the same affin-ity as full-length CA, and likely exhibits all of the ener-getically significant CTD–CTD interactions in CA [7] This provided a very unusual opportunity for a quanti-tative thermodynamic dissection of a protein–protein interface in a virus capsid [36,41,42] The individual energetic contribution of each interfacial side chain to CTD–CTD association was determined by alanine scanning mutagenesis on free CTD, using analytical gel filtration chromatography to determine the equilib-rium constant of the association step for each single mutant It was found that removal of the side chain interactions of any one of almost half the residues at the interface (Ile150, Leu151, Arg154, Leu172, Glu175, Val181, Trp184, Met185 and Leu189) destabilized the CTD–CTD association by over 6 kcalÆmol)1, leading
in each case to essentially monomeric CTD (even at high protein concentrations) [42] The CTD dimeriza-tion interface is formed by a central area of energeti-cally critical, mostly hydrophobic residues, surrounded
by a ring of energetically less important, polar residues (Fig 3)
Those structural and energetic features of the CTD dimerization interface are typical of many protein–pro-tein interfaces, but these generally exhibit affinities higher than those of CA or CTD (Kd= 10–20 lm)
In CTD, the dimerization affinity is kept low partly because several interfacial side chains contribute each
to substantially destabilize the CTD–CTD association [42] Quantitative thermodynamic double mutant cycles clearly showed that a part of this destabilizing effect is
a result of intersubunit electrostatic repulsions at the CTD–CTD interface, including those between Glu180 from both subunits, that may be conserved in HIV [36] It was suggested that such repulsions could arise
as one consequence of a selective pressure to maintain
an optimum balance between capsid stability (i.e for structural integrity in the virion) and instability (i.e for viral core disintegration and RNA release in the infected cell) [36]
This thermodynamic description of the CTD dimerization interface may also apply to the interface
as a part of the HIV-1 capsid: a good correlation was found between the effects on CTD dimerization and on capsid-like particle assembly of mutations that decreased, increased or preserved the affinity, or showed non-additive effects [6,34,36] The detailed structural and thermodynamic descriptions obtained
on the CTD–CTD interface have been already used
in the field of anti-HIV research, for example for the design of a helix-9 peptide mimic [3,43], and are
Trang 6currently being used in the development of
higher-affinity inhibitors of HIV-1 assembly
The NTD–NTD hexamerization interface
No hexamers of native CA from HIV-1 (with the
CTD inactivated) or its isolated NTD have been
obtained yet [32] However, a high-resolution
struc-tural description of the NTD–NTD interface in the
mature HIV-1 capsid is available The homologous
NTD from MLV did crystallize in the form of
hexa-meric rings, and the X-ray structure of this NTD
hexamer could be obtained [44] The tertiary
struc-tures of NTD from MLV and HIV-1 are very
simi-lar, and superposition of the atomic structure of
monomeric NTD from HIV-1 on the MLV hexamer
yielded a detailed model of quaternary interactions
in the HIV-1 hexamer [45] Most recently, the
full-length CA from HIV-1 was engineered to form
soluble, assembly-competent hexamers, and
high-reso-lution crystallographic structures of the modified CA hexamers were obtained [46] The modifications that yielded the most detailed structures involved the engineering of interprotein disulfide bridges through the introduction of Cys residues at the NTD–NTD interface (by mutations Ala14Cys and Glu45Cys) and the substantial weakening of CA–CA dimeriza-tion through the CTD–CTD interface (by mutadimeriza-tions Trp184Ala and Met185Ala)
The X-ray model of the NTD hexamer from MLV, the superimposed model of the NTD hexamer from HIV-1, the high-resolution X-ray model of the modified
CA hexamer from HIV-1, and the pseudoatomic models
of the HIV-1 hexamer obtained from cryo-EM [30] and electron cryocrystallography [39] maps are all in very good general agreement regarding the elements forming the NTD–NTD interface Helices 1, 2 and 3 of NTD are closer to the central hole of the hexameric ring, forming
a 18-helix bundle, with helices 1 lining the hole The NTD–NTD interface is defined by contacts between residues in helices 1 and 3 from a NTD monomer and residues in helices 1 and 2 from the neighboring mono-mer These models are also validated by: (a) mutational analysis, which showed that residues located in helix 1
or 2 impaired mature capsid assembly both in vivo and
in vitro [23,34] (Fig 2E,F), and (b) H–D exchange experiments, which identified residues in helices 1 and 2
as involved in intersubunit interactions in mature HIV-1 capsid-like particles [33]
No thermodynamic studies are available on the NTD–NTD interface However, in the X-ray structure
of the MLV hexamer, this interface buries a surface
of only 1100 A˚2 Most of the interactions are weak polar contacts, including some mediated by water molecules, and a substantial hydrophobic central area
is absent All these features differentiate the NTD– NTD interface from the CTD dimerization interface and many other protein–protein interfaces, and may contribute to explain the extremely low intrinsic ten-dency of NTD to homo-oligomerize Similar to that observed for the CTD dimerization interface, the binding free energy of the NTD–NTD interface may
be also limited by intersubunit electrostatic repulsions between charged residues in NTD, although, in this case, those residues do not form a part of the inter-face itself [35]
The NTD–CTD interface The NTD–CTD interface between neighboring subun-its within the hexameric rings that form the mature HIV-1 capsid has been mapped based on different observations, that are summarized below
Fig 3 Energetic dissection of the CTD–CTD dimerization interface
of HIV-1 [42] A spacefilling model of one of the monomeric
subun-its in a CTD dimer is represented The interfacial residues are
color-coded according to the effect on CTD dimerization of removing the
interactions of the side chain beyond the Cb (by mutation to
ala-nine) The effect is quantitated according to the difference in free
energy between nonmutated CTD and each mutant for association
of the CTD monomers into a dimer (DDGa) Red, truncation had a
dramatic effect and led to monomeric CTD at all but the highest
concentrations (DDG a > +6 kcalÆmol)1); orange, truncation had a
substantial effect (DDGa= +1.1 kcalÆmol)1); green, truncation had
no significant effect (DDGa< +0.3 to )0.3 kcalÆmol )1), or had only a
small negative effect (Lys199; DDG a = +0.5 kcalÆmol)1); violet,
mutation increased the dimerization affinity (DDG a = )0.4 to
)0.8 kcalÆmol )1) Figure reproduced with permission [42].
Trang 7First, in the pseudoatomic models of capsid-like
particles of the homologous RSV [40], the equivalent
NTD–CTD interface involves the MHR, and previous
genetic analysis revealed that mutations in the MHR
causing a defficiency in assembly were compensated by
secondary mutations that also map in the NTD–CTD
interface [47–49] Incidentally, one of these mutations
alone eliminated a positive charge from a cluster of
basic residues and increased the propensity of CA to
assemble Thus, it has been suggested that charge
repulsion, which would be partially relieved by that
mutation, may also naturally occur at this interface, at
least in RSV [40]
Second, the inhibitory activity of isolated CTD on
the in vitro polymerization of CA from HIV-1 was
found to be relieved by addition of isolated NTD [41]
Third, crosslinking experiments and MS analysis
revealed that, in capsid-like particles, Lys70 of NTD
was in close proximity to Lys182 of CTD from a
neighboring subunit [33]
Fourth, H–D exchange experiments indicated that
the C-terminus of helix 3 and the N-terminus of helix
4 in NTD, which were not a part of the CA–CA
inter-faces already identified, were additionally involved in
intersubunit contacts [33]
Fifth, the very recent determination of the hexameric
form of a modified full-length CA (with a crosslinked
NTD–NTD interface and a substantially inactive
CTD–CTD dimerization interface) has allowed a more
complete analysis of the precise residues and
interac-tions involved in the NTD–CTD interface [46] Most
of these involve side chains from helix 8 of the CTD
which pack against the N-terminal end of helix 4 of
the NTD of a neighboring subunit in the hexamer
Additional contacts involve helix 11 of the CTD and
the C-terminal end of helix 7 of the NTD of the
neigh-boring subunit The NTD–CTD interface, similar to
the NTD–NTD interface, lacks a substantial
hydro-phobic core, and mainly involves polar interactions,
including water-mediated hydrogen bonds and
inter-domain helix-capping interactions
Finally, the pseudoatomic model of the HIV mature
capsid lattice and mutational analysis [39] (Fig 2E,F)
are consistent with the above results
CA–CA interactions and stability of the mature
HIV-1 capsid
Mutations generally located at or close to CA–CA
interfaces, and that either increase or decrease the
sta-bility of mature HIV-1 capsid-like particles [34]
and⁄ or authentic HIV-1 cores [50], resulted in a loss
of viral infectivity Thus, the mature HIV-1
cap-sid⁄ viral core does appear to have evolved an opti-mum, delicate balance between stability inside the virion and instability inside the infected cell It is remarkable that different electrostatic repulsions between neighboring CA subunits through all three identified interfaces in the mature retrovirus capsid have been shown or suggested to occur [35,36,40] Furthermore, covariant mutations during HIV evolu-tion may have preserved at least a CTD–CTD elec-trostatic repulsion that was unambiguosly revealed using a thermodynamic cycle [36] The low oligomeri-zation affinity of CA and the stability balance of the HIV capsid may be a result, in part, of the preserva-tion of intersubunit electrostatic repulsions
Conformational rearrangements of CA and HIV-1 capsid assembly
Both CA domains are covalently connected through a flexible linker, and they appear to be unusually flexible themselves Accordingly, there is substantial evidence for the occurrence of different conformational rear-rangements of CA during the assembly of both the immature and the mature capsid of HIV-1 and other retroviruses Induced conformational switching in CTD and⁄ or NTD and ⁄ or alterations in the linker region could explain several observations, including: (a) the different ability of retroviral CAs and their free domains
to multimerize or oligomerize in different conditions; (b) the different shapes of the immature and the mature HIV-1 capsid [32], and of the mature capsids of different retroviruses; (c) the different structural organization of
CA in the immature and mature capsids, including the arrangement and spacing of the hexameric lattice [12] (Fig 1); (d) the formation of both hexamers and penta-mers using essentially the same structural elements of
CA [40]; (e) the different interactions of CA with several ligands and their effects on capsid assembly [3]; and (f) the possibility of transitions between alternative inter-faces during HIV-1 morphogenesis (see below)
Conformational changes in CTD Biophysical and thermodynamic analysis of the process
of HIV-1 CTD dimerization (from unfolded monomer
to native dimer) [41,51] revealed a transient, folded monomeric intermediate of low conformational stabil-ity This free monomer lacks a part of the structure of the monomeric subunits in the native, stable homo-dimer CTD dimerization was found to involve a substantial conformational rearrangement of the inter-acting, transient monomers that was thermodynami-cally characterized CTD mutant Trp184Ala is unable
Trang 8to dimerize [6], even at 1 mm; biophysical and
thermo-dynamic analysis of this monomeric mutant indicated
that it could provide a good structural model for the
transient monomer involved in the dimerization of
nonmutated CTD [41] Recent NMR studies of this
CTD mutant were consistent with those results, and
revealed that the tertiary structure of the isolated CTD
monomer is not identical to that of the monomeric
subunit in the dimer In particular, the dimerization
helix 9 is only transiently structured, and the last two
helices are rotated by 90 compared to their position
in dimeric CTD [52]
Subsequently, the structure of another monomeric
CTD mutant, Trp184Ala⁄ Met185Ala, was reported
[53] In this structure, helix 9 is shortened but formed,
and the last two helices are placed as in the dimer It
has been proposed that the structural differences found
for the two monomeric mutants may be a result of the
different pHs used in the NMR experiments [54] The
structure of the monomer with the transiently formed
helix was determined at neutral pH, whereas that of
the monomer with the structured helix was determined
at acidic pH and, when the pH was raised, the
reso-nances belonging to that helix disappeared [53] These
pH-dependent changes in tertiary structure are not
unusual in proteins [55,56]
In addition to its propensity to local rearrangements
and dynamics, the free CTD monomer appears to be
highly flexible overall [54] Thus, both in vitro and
dur-ing HIV-1 morphogenesis in vivo, the energetic balance
between alternative CTD conformations could be
altered by even subtle changes in the environment
[12,31], mutation and⁄ or ligand binding to CTD (such
as that of capsid assembly inhibitor peptides CAI and
NYAD-1) [3] This model is consistent with the several
modes of association observed for CTD in crystal
form, including the balance between a
domain-swapped CTD–CTD interface [25] and a
nondomain-swapped interface, proposed to have a role during
HIV-1 morphogenesis
In the context of the unusual conformational
plastic-ity of CTD, it should be noted at this point that
muta-tion of certain CTD residues, including residues
belonging to the MHR, had substantial effects on
CTD dimerization in solution [41], even though those
residues and the MHR are located away from the
rele-vant dimerization interface Thus, it may be worth
considering that, in addition or alternatively to a direct
role in intersubunit interactions, some CA residues and
the MHR could indirectly participate in HIV-1
morphogenesis; for example, by stabilizing an
assem-bly-competent CA conformation and⁄ or facilitating
interactions between other residues
The lack of a perfect fitting of the closely-matching atomic structure of the CTD dimer [6,7] on the elec-tron cryocrystallography map of mature HIV-1 capsid-like particles has led to the suggestion that small conformational changes could also occur in the CTD dimerization interface, and in the tertiary structure of CTD itself, during assembly of the mature HIV-1 cap-sid [39] The detailed atomic structure and quantitative thermodynamic description available for the CTD dimerization interface could be then considered to define the sterically unconstrained, minimum free energy conformation Steric constraints in the mature HIV-1 capsid lattice could distort and destabilize somewhat the ‘ideal’ CTD–CTD interface (and per-haps other CA–CA interfaces) Such constraints could contribute, in addition to electrostatic repulsions and other effects, to establish the appropriate balance between stability and instability of the viral core
Conformational changes in NTD During maturation, the proteolytic cleavage of Gag at the linker between CTD and SP1 could destabilize the proposed SP1 six-helix bundle, facilitating disassembly
of the immature capsid [17,57] In addition, processing
of the MA-NTD linker allows the folding as a b-hair-pin of the NTD N-terminal segment, leading to a local conformational change in NTD This rearrangement has been proposed to destabilize the immature capsid and⁄ or create the NTD–NTD interface observed in the mature HIV-1 capsid, thus promoting core assembly [58] In addition, alterations in the H–D exchange pro-tection pattern when immature and mature virus-like particles were compared have provided evidence for a maturation-induced formation of the NTD–CTD inter-face observed in the mature HIV-1 capsid [59] Ligand (e.g CypA [60]) binding to NTD can also lead to conformational rearrangements
To summarize, conformational rearrangements allowed by the unusual structural plasticity of both
CA domains, and their connection through a flexible linker, may shift their association equilibria during HIV-1 morphogenesis The rearrangements proposed and their detailed molecular description remain to be further substantiated in future structural studies
Macromolecular crowding effects on CA–CA association and HIV-1 capsid assembly
Both NTD and CTD of retroviruses have an intrinsi-cally low or undetectable tendency to oligomerize in solution, and conformational rearrangements in CA
Trang 9(including those reviewed above) may not be sufficient
to allow the establishment of the relatively stable CA–
CA interactions observed during HIV-1 assembly For
example, formation of a b-hairpin in NTD during
maturation may not provide an explanation for the
apparent inability of unmodified CA and its NTD to
hexamerize in solution because the hairpin is already
formed in them [45] Similarly, the induction of a
con-formational rearrangement in NTD through
interac-tion with CTD is unlikely to explain why CA with the
dimerization interface inactivated through mutation is
unable to hexamerize in the same conditions where
nonmutated CA is able to polymerize into capsid-like
particles [33] Indeed, there is evidence that, in addition
to conformational changes in CA, physicochemical
conditions having an effect on the chemical activity
(‘effective concentration’) of CA may also play a major
role in the associative properties of NTD and CTD to
form the HIV-1 capsid, as reviewed below
The concentration of CA inside the mature HIV-1
virion may be at least 3.5 mm [38] (approximately
8 mm if an estimation of close to 5000 CA molecules
per virion [16] is accepted) However, in the very
lim-ited space available inside a mature HIV-1 virion,
thousands of molecules of MA, CA, SP1, NC, SP2
and p6, as well hundreds of other viral and cellular
protein molecules and two long RNA molecules, are
found Thus, in the virion, as in the cell,
macromolecu-lar crowding effects must be in operation as a result of
the exclusion of water molecules from the large
frac-tion of internal volume occupied by the
macromole-cules themselves [61] The chemical activity, or
‘effective concentration’ of CA in the HIV-1 virion
(upon release from Gag during maturation) must be
not a few millimolar, but much higher Under these
conditions, protein association reactions, such as CA
assembly, must be strongly favored [61] The available
experimental evidence summarized below is consistent
with this prediction
In vitro polymerization of CA into mature HIV-1
capsid-like particles in the virtual absence of
macro-molecular crowding (at maximum protein concentrations
in the order of 500 lm, which is far lower than the CA
effective concentration in the virion) was achieved only
in nonphysiological conditions, such as: (a) a very high
ionic strength [32] that could screen electrostatic
repul-sions [35,36] or (b) the use of a CA–NC fusion protein in
the presence of nucleic acid [9,28,29], which could
increase the CA local concentration through multiple
NC-mediated interactions with CA–NC Similarly, it has
been suggested that putative interactions between CA
and a NC–RNA complex could initiate HIV-1 core
assembly in vivo [38] However, this possibility may
have to be re-evaluated if the chemical activity of CA inside the maturing virion (as a result of macromolecu-lar crowding) is taken into account
By contrast to previous in vitro assembly procedures, very efficient assembly of mature HIV-1 capsid-like particles was recently achieved using free CA at moder-ate concentrations, in the absence of any other bio-molecule, and at physiological ionic strength [37] The procedure was simply based on the addition of inert macromolecular crowding agents to increase the CA effective concentration to very high values, closer to those present in the HIV-1 virion The capsid-like tubu-lar and, occasionally, cone-shaped particles formed were indistinguishable by EM from those obtained at very high salt concentrations (and known to be orga-nized similarly to authentic mature HIV-1 capsids) The capsid-like particles formed at close-to-physio-logical CA effective concentration and ionic strength were kinetically much less stable than those formed at high ionic strength [37] This reinforces the view that electrostatic repulsions could contribute to the observed HIV-1 core instability in infected cells In addition, the release of the viral core and many free
CA molecules from the confined space in the virion into the very large volume within the cell would also facilitate uncoating by ‘dilution’ (i.e through a dra-matic decrease in the CA effective concentration) [50] These observations indicate that the very high chemical activity of CA inside the virion as a result of macromolecular crowding may be critical for the assembly and stability of the mature HIV-1 capsid The very high chemical activity of CA in the maturing virion may promote association through the CA–CA interfaces identified, even though both retroviral CA domains have a low or negligible tendency to oligo-merize in solution Similarly (and in addition to con-densation mediated by MA–plasma membrane and NC–RNA binding), macromolecular crowding in the cell may have a strong influence on the assembly of the immature HIV-1 capsid, by promoting CA–CA and other weak Gag–Gag interactions
Acknowledgements
The author acknowledges J L Neira for collaboration and critical reading of the manuscript, and M del A´lamo, R Bocanegra and A Rodrı´guez-Huete for excellent experimental work Current work in the author¢s laboratory is supported by grants from FIPSE (36557⁄ 06), the Spanish Ministry of Science (BIO2006-00793) and the Madrid Regional Government (S-0505⁄ MAT⁄ 0303), and an institutional grant from Funda-cio´n Ramo´n Areces The author is an associate
Trang 10member of the Instituto de Biocomputacio´n y Fı´sica
de los Sistemas Complejos, Zaragoza, Spain
References
1 Adamson CS & Jones IM (2004) The molecular basis of
HIV capsid assembly-five years of progress Rev Med
Virol 14, 107–121
2 Ganser-Pornillos BK, Yeager M & Sundquist WI
(2008) The structural biology of HIV assembly Curr
Opin Struct Biol 18, 203–217
3 Neira JL (2009) The capsid protein of human
immuno-deficiency virus: designing inhibitors of capsid assembly
FEBS J 276, doi:10.1111/j.1742-4658.2009.07314.x
4 Gitti RK, Lee BM, Walker J, Summers MF, Yoo S &
Sundquist WI (1996) Structure of the amino-terminal
core domain of the HIV-1 capsid protein Science 273,
231–235
5 Momany C, Kovari LC, Prongay AJ, Keller W, Gitti
RK, Lee BM, Gorbalenya AE, Tong L, McClure J,
Ehrlich LS et al (1996) Crystal structure of dimeric
HIV-1 capsid protein Nat Struct Biol 3, 763–770
6 Gamble TR, Yoo S, Vajdos FF, von Schwedler UK,
Worthylake DK, Wang H, McCutcheon JP, Sundquist
WI & Hill CP (1997) Structure of the carboxy-terminal
dimerization domain of the HIV-1 capsid protein
Science 278, 849–853
7 Worthylake DK, Wang H, Yoo S, Sundquist WI &
Hill CP (1999) Structures of the HIV-1 capsid protein
dimerization domain at 2.9 resolution Acta Crystallogr
55, 85–92
8 Nermut MV, Hockley DJ, Jowett JB, Jones IM,
Gar-reau M & Thomas D (1994) Fullerene-like organization
of HIV gag-protein shell in virus-like particles produced
by recombinant baculovirus Virol 198, 288–296
9 Campbell S & Vogt VM (1995) Self-assembly in vitro of
purified CA-NC proteins from Rous sarcoma virus and
human immunodeficiency virus type 1 J Virol 69,
6487–6497
10 Campbell S & Rein A (1999) In vitro assembly
proper-ties of human immunodeficiency virus type 1 Gag
protein lacking the p6 domain J Virol 73, 2270–2279
11 Campbell S, Fisher RJ, Towler EM, Fox S, Issaq HJ,
Wolfe T, Phillips LR & Rein A (2001) Modulation of
HIV-like particle assembly in vitro by inositol
phos-phates Proc Natl Acad Sci USA 98, 10875–10879
12 Mayo K, Huseby D, McDermott J, Arvidson B, Finlay
L & Barklis E (2003) Retrovirus capsid protein
assembly arrangements J Mol Biol 325, 225–237
13 Huseby D, Barklis RL, Alfadhli A & Barklis E (2005)
Assembly of human immunodeficiency virus precursor
gag proteins J Biol Chem 280, 17664–17670
14 Fuller SD, Wilk T, Gowen BE, Kra¨usslich H-G & Vogt
VM (1997) Cryo-electron microscopy reveals ordered
domains in the immature HIV-1 particle Curr Biol 7, 729–738
15 Wilk T, Gross I, Gowen BE, Rutten T, de Haas F, Welker R, Kra¨usslich H-G, Boulanger P & Fuller SD (2001) Organization of immature human immunodefi-ciency virus type 1 J Virol 75, 759–771
16 Briggs JAG, Simon MN, Gross I, Kra¨usslich H-G, Fuller SD, Vogt VM & Johnson MC (2004) The stoichiometry of Gag protein in HIV-1 Nat Struct Mol Biol 11, 672–675
17 Wright ER, Schooler JB, Ding HJ, Kieffer C, Filmore
C, Sundquist WI & Jensen GJ (2007) Electron cryoto-mography of immature HIV-1 virions reveals the structure of the CA and SP1 Gag shells EMBO J 26, 2218–2226
18 Briggs JAG, Riches JD, Glass B, Bartonova V, Zanetti
G & Kra¨usslich H-G (2009) Structure and assembly of immature HIV Proc Natl Acad Sci USA 106, 11090– 11095
19 Borsetti A, O¨hagen A˚ & Go¨ttlinger HG (1998) The C-terminal half of the human immunodeficiency virus type 1 Gag precursor is sufficient for efficient particle assembly J Virol 72, 9313–9317
20 Mammano F, O¨hagen A˚, Ho¨glund S & Go¨ttlinger HG (1994) Role of the major homology region of human immunodeficiency virus type 1 in virion morphogenesis
J Virol 68, 4927–4936
21 Dorfman T, Bukovsky A, O¨hagen A˚, Ho¨glund S & Go¨ttlinger HG (1994) Functional domains of the capsid protein of human immunodeficiency virus type 1
J Virol 68, 8180–8187
22 Reicin AS, O¨hagen A˚, Yin L, Ho¨glund S & Goff SP (1996) The role of Gag in human immunodeficiency virus type 1 virion morphogenesis and early steps of the viral life cycle J Virol 70, 8645–8652
23 von Schwedler UK, Stray KM, Garrus JE & Sundquist
WI (2003) Functional surfaces of the human immuno-deficiency virus type 1 capsid protein J Virol 77, 5439–5450
24 Ako-Adjei D, Johnson MC & Vogt VM (2005) The ret-roviral capsid domain dictates virion size, morphology and coassembly of gag into virus-like particles J Virol
79, 13463–13472
25 Ivanov D, Tsodikov OV, Kasanov J, Ellenberger T, Wagner G & Collins T (2007) Domain-swapped dimerization of the HIV-1 capsid C-terminal domain Proc Natl Acad Sci USA 104, 4353–
4358
26 Carlson L-A, Briggs JAG, Glass B, Riches JD, Simon
MN, Johnson MC, Mu¨ller B, Gru¨newald K & Kra¨usslich H-G (2008) Three-dimensional analysis of budding sites and released virus suggests a revised model for HIV-1 morphogenesis Cell Host Microbe
4, 592–599